BEAR
IT
Page 12
It is therefore very important to pay attention to the following when the stove is on:
Do not approach and touch the glass on the door, there is a BURNING HAZARD
Do not approach and touch the smoke drain pipe, there is a BURNING HAZARD
Do not do any cleanups
Do not open the door because the stove is working properly only when it is sealed
Do not throw away the ashes when the stove is ON
Children and pets need to stand away from the stove
FOLLOW ALL INSTRUCTIONS GIVEN IN THIS MANUAL
Likewise, the proper use of biofuel pellets means:
Only use the fuel that meets the manufacturer's instructions,
Always follow the maintenance plan for the stove,
Clean the stove every day (only when the stove and the ash are cold),
Do not use the stove in case of any defects or abnormalities, in the case of unusual noise and/or
suspected faults,
Do not spray water on the stove, even when fire fighting,
Do not turn off the stove by pulling the plug. Use the button on the board to turn off,
Do not tilt the stove, IT MAY BECOME UNSTABLE,
Do not use the stove as a support or a holder. Never leave the tank lid open.
Do not touch the dyed parts of the stove while it is ON,
Do not use wood or coal as a fuel,
but only the pellet
with the following characteristics: diameter of 6‐7
mm, maximum length 30 mm, maximum moisture content 8‐9%,
Do not use the stove to burn waste,
Always perform all operations with maximum security measures.
7.5 SAFETY GUIDILINES FOR IGNITION AND CLEANING OF THE STOVE
-
For turning the stove ON never use gasoline, kerosene or any other flammable liquid. Keep these types
of fluid away from the stove while it is running,
-
Never turn the stove ON if the glass is damaged. Do not strike the glass or the door so that they do
not get damaged,
-
While the stove is ON, do not open the door to clean the glass. Clean the glass only when the stove is
cold, using a cotton cloth or paper towel and a glass cleaner,
-
Make sure the stove is secure to prevent any movement,
-
Make sure that the ash box is inserted and that it is fully closed, so that the doors are leaning
properly on the box,
-
Make sure the stove door is firmly closed while the stove is ON,
-
Use a vacuum cleaner to pull the ashes from the stove only when the stove is completely cool,
-
Never use abrasive cleaners for cleaning the surface of the stove.
IMPORTANT SAFETY INFORMATION
The manufacturer is always at your service to provide you with all the information you may need regarding
the stove and instructions for assembly and installation in your geographical conditions. Properly
connecting the stove, according to these instructions, is very important to prevent the danger of fire and
any defects.
The stove works
with a combustion suction pressure.
Therefore, make sure that the smoke is well
thermally insulated.