LIN/MIC switch:
When using microphones and wireless
systems, select the MIC setting. When recording from a mixer
or other audio device, use the LINE setting.
GND 1/GND 2:
Set the switch to GND 1. If you hear a hum
or buzz caused by a ground loop, switch to GND 2 to
eliminate the noise.
Mono/Stereo (M/S):
When recording one channel, use the
mono (M) setting. The signal will be sent to both left and right
channels. When recording two channels, use the stereo (S)
setting. The level of each channel can be controlled individually.
Aux input (AUX):
The signal from an external device is sent
to the right channel. Do not use the right XLR input when
using the Aux input.
Output (OUT):
Use the included stereo 3.5 mm mini-plug
cable to attach to the mic input of your camera or camcorder.
Instructions
