To prevent personal injury or damage to your Kore 2.0
™
read the following
guidelines carefully to ensure proper usage:
1. Avoid exposing Kore 2.0
™
to chemicals, sudden impact and extreme heat.
2. When cleaning Kore 2.0
™
, do not use harsh solvents such as alcohol,
benzine, acetone or thinner.
3. Do not attempt to disassemble Kore 2.0
™
or remove the battery.
4. If you feel any discomfort while wearing Kore 2.0
™
, loosen the wristband
and discontinue using.
5. This is not a medical grade diagnostic device.
6. Do not use in steamy environment such as sauna or hot spring. Not for
swimming or diving.
IMPORTANT SAFETY INFORMATION
7. Do not submerge the Kore 2.0™ in water or other liquids for prolonged
periods.
8. Do not use the Kore 2.0
™
if it feels warm or hot or the display is cracked.
9. Substances in the Kore 2.0
™
and its battery may harm the environment
or cause injury if handled and disposed of improperly. Do not dispose
of the Kore 2.0
™
in a fire.
10. Only charge Kore 2.0
™
with its authorized charging dongle. Do not charge
the Kore 2.0
™
if it is wet, or wear the product while you are charging it.
11. Kore 2.0
™
and its charging cable may include magnetic material.
Magnets may interfere with pacemakers, defibrillators, or other medical
devices. Consult your physician and the manufacturer of your medical
device before using the Kore 2.0
™
to determine if this product is safe
for you.
HRV
Tracks the variation in time between
each heartbeat.
FASTENING THE WRISTBAND:
The device sensors requires direct skin contact on your wrist
to get an accurate reading.
Hold Kore 2.0™ in place on the outside of your wrist.
Tighten the wristband until you feel it has a snug fit around
your wrist, but not so tight that it cuts off circulation, then
fasten the pin-and-tuck strap.
To remove the device, unpin the tuck strap.
1.
2.
3.
4.
CHARGING THE BATTERY:
Download the KoreHealth App onto your iOS
™
or Android™
smartphone by scanning the QR codes on the next page,
or by searching “KoreHealth” in the App Store
®
or
Google Play Store™.
INSTALLING THE KOREHEALTH APP:
•
Device requirements: iOS™ 8.0 and above; Android™ 4.4 and above.
Android™
iOS
™
•
CONNECTING KORE 2.0™ TO YOUR SMARTPHONE:
You will have to pair your Kore 2.0™ to your smartphone manually
the first time you use it. After that, it will connect automatically
anytime your device is within range. Your Kore 2.0™ can store
off-line data for up to 30 days before syncing with your smartphone.
Open the KoreHealth™ App on your smartphone.
Hold Kore 2.0™ near your smartphone and go to Device page,
click “Pair Device”.
Choose Bluetooth
®
name corresponding with your device’s
unique serial number (ex. K2XXXXXX). You can check your
device's Bluetooth
®
name in Settings.
Connection completed.
1.
2.
3.
4.
Note:
When you turn on the device for the first time, the serial number will appear along
with a QR Code to download the KoreHealth App.
01
02
05
04
03
06
07
08
09
FRONT SIDE
Dimensions: 9 x 9 cm
CMYK & double side printing
30538 Kore 2.0 IM
Attach the bottom of the watch to the
magnetic pogo pin charging dongle.
(See diagram to right)
1.
Kore 2.0™ is equipped with a magnetic pogo
pin charging dongle.
To charge, plug the dongle into a 5V 1A
USB-A port (not included) or a wall socket with a USB
adapter. Make sure your power source is 5V. It might take
up to 3-5 minutes for the watch to be responsive. The charging
screen will turn off after 10 seconds, touch the screen to
reawaken the user interface.
2.
Allow Kore 2.0™ to charge for up to 2 hours or until the
battery indicator on the home screen is full.
3.
When completely charged, remove the device from
charging dongle.
4.
When the battery is lower than 5% it will only show the
LOW BATTERY symbol on the screen. Please recharge the
watch before use.
For optimal performance, it is recommended
to wear Kore 2.0™ on your left wrist.
•
•
V3
TIPS FOR USE
If the Kore 2.0™ screen does not light up immediately after
being plugged in properly, the battery may be completely
drained. Let it charge for at least 5 minutes. The screen
should light back up within this time. If Kore 2.0™ still does
not light up or charge after all these steps, please contact
customer support.
Sensors
Kore 2.0™ is equipped with a glass touch screen and capacitive
Home button ( ) located at the bottom of the screen.
Short Press the Home button
( )
to return to previous screen.
Long Press the Home button
( )
for 3 seconds to return to the
Home screen.
•
•
•
USING KORE 2.0™:
Swipe up down left and right on the screen through modes.
•
Short Press on screen/icon on screen to select.
•
HOME SCREEN
The home screen displays the time, day, date, weather, health
metrics data and other essential information.
To change the home screen display style, long press the home
screen for 3 seconds to open Cover Style Selection. Swipe left
and right to view cover design. Short press at the end to
confirm your selection.
To cycle through modes (ie. Health metrics, workouts,
messages and more), scroll up and down.
Swipe left or right to access Quick Display Settings
& Weather.
MODES
1.
2.
HEALTH METRICS DATA
Measures your daily steps, distance,
calories and activity minutes. Short
press Health Data to expand details.
WORKOUT
Measures your performance during specific
exercises. Swipe up and down to select workout
(Walk, Run, Cycling, Gym, Hiking, Basketball,
Soccer, Tennis, Yoga, Dance, Badminton). Select
Target Setting (Distance, Duration, Calories or
Open Goal) and begin workout.
BLOOD OXYGEN MONITOR
Measures oxygen levels in your blood.
HEART RATE MONITOR
Measures your heart rate in beats per
minute.
Swipe
up
,
down
,
left
and
right
on the screen to cycle through
modes.
Short Press display
for selection.
Long Press 3 seconds.
Short Press the Home
button to return to
previous screen.
Long Press the Home
button for 3 seconds to
return to the Home screen.
To keep Kore 2.0™ clean, wipe it down with
a damp cloth once a week or after physical
activities.
To maintain consistent sensor reading, it is
recommended to clean the sensor at the
back of the watch after use. Dirt, lotion,
grease or excessive water and sweat
will affect sensor performance.
•
•
Left Hand
Warning: This device is not a toy. Keep away from children and pets.
12. Consult your doctor before beginning or modifying any exercise program
using the Kore 2.0
™
, or if you have any preexisting condition.
13. Do not check call or other notifications, GPS, or other applications on
the product's display while driving or in other situations where distractions
could be hazardous. Always be aware of your surroundings when
exercising.
Long press home button to turned on the device.
If the device cannot be turned on, it is possible that the
battery might be low. Please charge it on a 5V rated USB
power supply for up to 3-5 minutes. Please refer to the
charging instruction on page 2.
•
•
TO TURN ON KORE 2.0™:
Note:
You will need to charge your Kore 2.0 smartwatch with the magnetic
pogo pin charging dongle the first time you use it.
•
Kore 2.0™ requires approximately 20 seconds to
get a heart rate or blood oxygen reading.
•
Summary of Contents for 30538
Page 1: ...V3 ...
