106
4.10 Security
JetNet 6710G provides several security features for you to secure your
connection. The features include Port Security and IP Security.
Following commands are included in this group:
4.10.1 Port Security
4.10.2 IP Security
4.10.3 IEEE 802.1x
4.10.4 CLI Commands of the Security
4.10.1 Port Security
Port Security feature allows you to stop the MAC address learning for
specific port. After stopping MAC learning, only the MAC address listed in
Port Security List can access the switch and transmit/receive traffic. This is
a simple way to secure your network environment and not to be accessed
by hackers.
This page allows you to enable Port Security and configure Port Security
entry.
Port Security State:
Change Port Security State of the port to Enable first.
Add Port Security Entry:
Select the port, and type VID and MAC address.
Format of the MAC address is xxxx.xxxx.xxxx. Ex: 0012.7701.0101. Max
volume of one port is 10. So the system can accept 100 Port Security MAC
addresses in total.
Port Security List:
This table shows you those enabled port security
entries. You can click on
Remove
to delete the entry.