105
4.11.2
IP Security
In IP Security section, it is required to have a
specific IP addresses to grant authorization for
management access to this JetNet via a web
browser or Telnet.
IP Security: Select Enable and Apply to enable
IP security function.
Add Security IP: specific IP addresses for
security can be assigned here, and then click
“Add” to add a new IP entry. Only these IP
addresses can access and manage JetNet via a
Web browser or Telnet sessions. The maximum
security IP address entry is 10 addresses.
Security IP List: This table shows added security
IP addresses. Select the entry to be removed,
then click “Remove” icon to delete Security IP
address entry.
4.11.3
IEEE 802.1x
802.1X configuration
IEEE 802.1X is an IEEE standard for port based
network access control, which provides
authentication to the devices attached to a LAN
port. It can establish a point-to-point connection or
prevent any unauthenticated access from the
specific port.
System AuthControl:
To enable or disable the
802.1x authentication.
Authentication Method:
Radius is an
authentication server that provide key for
authentication, with this method, user must
connect switch to server. If user select Local for
the authentication method, switch use the local
user data base which can be create in this page
for authentication.
Radius Server IP:
The IP address of Radius server
Shared Key:
The password for the communication between switch and Radius Server.
Server Port:
UDP port of Radius server.
Accounting Port:
Port for packets that contain the information of account login or logout.
Summary of Contents for JetNet 6910G-M12 Series
Page 5: ...1 5 4 About Korenix 141...
