108
Host Mode: if there are more than one device connected to this port, set the Host Mode to
single means only the first PC authenticate success can access this port. If this port is set
to multi, all the device can access this port once any one of them pass the authentication.
Control Direction: determined devices can end data out only or both send and receive.
Re-Auth Period: control the Re-authentication time interval, 1~65535 is available.
Quiet Period: When authentication failed, Switch will wait for a period and try to
communicate with radius server again.
Tx period: the time interval of authentication request.
Supplicant Timeout: the timeout for the client authenticating
Sever Timeout: The timeout for server response for authenticating.
Click Initialize Selected to set the authorize state of selected port to initialize status.
Click Reauthenticate Selected to send EAP Request to supplicant to request
reauthentication.
Click Default Selected to reset the configurable 802.1x parameters of selected port to the
default values.
802.1X Port Status
The port status for Port control status, Authorize Status, Authorized Supplicant and
Oper Control Direction each port can be browsed.
Summary of Contents for JetNet 6910G-M12 Series
Page 5: ...1 5 4 About Korenix 141...