1
Installing the Korg CDRW-1 Drive
Please note: These instructions replace the instructions supplied in
the User’s Manual if your Pa1X (a) does not include a small screw
under the CD-RW slot (shown in the diagram), and (b) does not
include a mounting tray inside the slot itself.
If the above is not true, please follow the instructions supplied in the
User’s Manual.
A Korg CDRW-1 CD player/writer can be installed into your Pa1X. Installation will require a “+” (cross-point) screwdriver. Please con-
tact your Korg dealer for more information on how to obtain this option.
Warning:
Installation of the CD drive is done at the user’s own risk. Korg will assume no responsibility for any damage or injury resulting
from improper installation or use.
Note:
CD writing requires Operating System version 2.0. For information on CD functions, please refer to the User’s Manual.
Installing the Korg CDRW-1 Drive
Pa1X Pro
Pa1X
1) Before you begin, turn the instrument off, and disconnect the power cable.
2) Push the small unlock button with the tip of a pen, to open the CD drive’s (A) cover, and remove the paper protection.
3) With the help of a cross-point screwdriver, remove the two screws
(a) securing the floppy disk drive cover (B), and remove the cover itself.
3) With the help of a cross-point screwdriver, remove the two screws
(a) securing the CD slot cover (B), and remove the cover itself.
a
a
push
A
A
push
A
A
a
a
B
a
a
B
