manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, 88.208.23.73:8080.

Share
Download
background image

Program: Page Menu Commands    Cut IFX Slot

151

Note: 

In Combi or Seq modes, this Track View page 

is a convenient way to check the IFX that are 
chained for each timbre or track, and the Insert FX 
command can be used in this page as well to edit 
the effect settings of each timbre or track. When you 
do so, the routing will be adjusted automatically so 
that the settings of other timbres or tracks will 
remain the same.

3. Select “Insert IFX Slot” to open the dialog box.

4. Use the “To” 

fi

eld to specify the IFX number at 

which you want to insert a slot. (The IFX you 
selected in step 1 or 2 will be shown here as the 
default.)

Specify the “Auto Routing” and “Auto Chain” 
options. Normally you will leave these on.

Auto Routing:

 This automatically adjusts the 

following parameters in order to preserve the 
currently-existing routing.

• Routing: Bus Select

• Routing- Page Menu: DKit Patch (Combi/SEQ)

Auto Routing always enabled on the Track View 
page

You can’t change the 

Auto Routing

 setting if you’ve 

executed the Insert IFX Slot command from the Track 
View page. The command will always be executed 
with this option On.

Drum Kits not supported by Auto Routing

Drum Kits can store separate 

Bus Select

 settings for 

each key. Because these settings are stored in the Drum 
Kit, and not the Program, the 

Auto Routing

 option 

can’t correct them.

Drum Kit Programs will use these separate 

Bus Select

 

settings if the IFX Routing page’s 

Use DKit Setting 

parameter

 

is turned 

On

.

In this case, you have two options. Either:

• Use 

Auto Routing

, and then manually adjust the 

Bus Select

 settings for each key of the Drum Kit to 

match the new IFX slot arrangement.

or:

• Don’t use the 

Insert IFX Slot

 command. Instead, 

remove the unwanted IFX slot by changing the 

Chain to

 settings, or by using the 

Copy IFX

 or 

Swap IFX

 commands.

Auto Chain: on:

 If the IFX you’ve inserted is located 

within a chain, the 

Chain

 setting will automatically 

be turned on for the inserted IFX so that it will be 
chained with the preceding and following IFX.

If the IFX you’ve inserted is not inside a chain, 

Auto 

Chain

 does nothing.

5. Press the OK button to execute the Insert IFX Slot 

command, or press the Cancel button to cancel.

If there are not enough IFX units to insert, pressing 
the OK button will simply exit the command 
without doing anything.

In this example, 000: No Effect will be inserted into 
IFX3 when you execute the command. The effects 
that were at IFX3–IFX5 will be relocated to IFX4–6, 
resulting in a chain consisting of IFX1–IFX6.

6. For the newly inserted slot, turn the On/Off 

setting On. Then select and edit the desired effect.

Cut IFX Slot

Cut IFX Slot 

is available on the Routing and Insert FX 

tabs of the IFX page.

This command removes an IFX slot, and moves the 
other IFX upwards to fill in the gap–convenient when 
you want to remove an effect that you’re not using.

When the IFX are moved upwards, all of their related 
settings are copied as well. This includes 

Chain

, 

Pan

,

 

REC Bus

, 

FX Control Bus

, 

Sends 1 and 2

, and (for 

Combis and Songs only) 

Ctrl Ch

. 

This command also provides an Auto Routing option 
that automatically adjusts related parameters in order 
to preserve the previously-existing routing.

1. In the Insert FX page, select the insert effect slot 

that you want to remove.

In this example, IFX1

→

IFX2

→

IFX3

→

IFX4

→

IFX5 are 

chained, and we are going to remove the IFX3 slot.

You can also perform this operation from within the 
Track View page. Select the insert effect slot that you 
want to remove.

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

Canyon Velvet Tread HKB-W20 Quick Manual preview
Velvet Tread HKB-W20
Brand: Canyon Pages: 2
Razer DEATHSTALKER V2 Quick Start Manual preview
DEATHSTALKER V2
Brand: Razer Pages: 9
Prime Tech H-066 User Manual preview
H-066
Brand: Prime Tech Pages: 6
Technics SX-KN470 Owner'S Manual preview
SX-KN470
Brand: Technics Pages: 76
Kurzweil 1200 Pro Manual preview
1200 Pro
Brand: Kurzweil Pages: 141
A4Tech RFKBS-63 User Manual preview
RFKBS-63
Brand: A4Tech Pages: 6
Manhattan 155014 Quick Start Manual preview
155014
Brand: Manhattan Pages: 1
Creative 70CF004000010 - Prodikeys PC-MIDI Wired Keyboard User Manual preview
70CF004000010 - Prodikeys PC-MIDI Wired Keyboard
Brand: Creative Pages: 25
Brookstone 839115 Quick Manual preview
839115
Brand: Brookstone Pages: 12
Kenwood SJM550 series Instructions Manual preview
SJM550 series
Brand: Kenwood Pages: 90
Kenwood SJM240 series Manual preview
SJM240 series
Brand: Kenwood Pages: 55
TTS Rechargeable Stopwatches User Manual preview
Rechargeable Stopwatches
Brand: TTS Pages: 8
PrehKeyTec MCI TouchKey Operating Instructions And Technical Data preview
MCI TouchKey
Brand: PrehKeyTec Pages: 10
iPazzPort KP-810-10-BTT User Manual preview
KP-810-10-BTT
Brand: iPazzPort Pages: 12
iPazzPort KP-810-16BR User Manual preview
KP-810-16BR
Brand: iPazzPort Pages: 23
ION PIANO 2 GO Datasheet preview
PIANO 2 GO
Brand: ION Pages: 1
Zoom ZDTV Quick Start Manual preview
ZDTV
Brand: Zoom Pages: 6
Actxa AX-H200-01 Quick Start Leaflet preview
AX-H200-01
Brand: Actxa Pages: 17

Brands by name

Popular brands

Load more brands