manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, 88.208.23.73:8080.

Share
Download
background image

Program P5: Filter    5–1: Filter Basic

185

5–1a: Routing

Filter Routing

[Single, Serial, Parallel, 24dB/oct]

There are two filters, Filter A and Filter B. This 
parameter controls whether one or both of the filters 
are used, and if both are used, it controls how they are 
connected to each other.

Single.

 This uses only Filter A as a single 2-pole, 

12dB/octave filter (6dB for Band Pass and Band 
Reject). When this option is selected, the controls for 
Filter B will be grayed out. A classic synthesizer 
expander module used this type of filter.

Serial.

 This uses both Filters A and B as separately 

controllable 2-pole filters. The output of Filter A is 
processed through Filter B.

Parallel.

 This also uses both Filter A and Filter B. 

Unlike Serial, above, the outputs of the two filters are 
kept separate, with individual control over both level 
and pan.

24dB/oct.

 This merges both filters to create a single 4-

pole, 24dB/octave filter (12dB for Band Pass and Band 
Reject). In comparison to Single, this option produces a 
sharper roll-off beyond the cutoff frequency, as well as 
a slightly more delicate resonance. Many classic analog 
synths used this general type of filter.

When 

24dB/oct

 is selected, only the controls for Filter 

A are active; the controls for Filter B will be grayed out. 
Also, note that the 

Multi Filter

 is not available in this 

mode.

5–1b: Filter A

Filter Type

[

Low Pass, High Pass, Band Pass,

Band Reject, Multi Filter

]

The filter will produce very different results depending 
on the selected filter type. The selections will change 
slightly according to the selected 

Filter Routing

, to 

show the correct cutoff slope in dB per octave.

Low Pass.

 This cuts out the parts of the sound which 

are 

higher

 than the cutoff frequency. Low Pass is the 

most common type of filter, and is used to make bright 
timbres sound darker.

High Pass.

 This cuts out the parts of the sound which 

are 

lower

 than the cutoff frequency. You can use this to 

make timbres sound thinner or more buzzy. 

Band Pass.

 This cuts out all parts of the sound, both 

highs and lows, except for the region around the cutoff 
frequency. Since this filter cuts out both high and low 
frequencies, its effect can change dramatically 
depending on the cutoff setting and the oscillator’s 
multisample.

With low resonance settings, you can use the Band 
Pass filter to create telephone or vintage phonograph 
sounds. With higher resonance settings, it can create 
buzzy or nasal timbres.

Band Reject.

 This filter type–also called a notch filter–

cuts only the parts of the sound directly around the 
cutoff frequency. Try modulating the cutoff with an 
LFO to create phaser-like effects.

Multi Filter.

 This is a complex filter which is capable of 

all of the above filter types, and many more besides. 
For more information, see “5–2: Multi Filter,” on 
page 187.

The Multi Filter is available only for Filter A, and only 
when the Filter Routing is set to 

Single

, 

Serial

 or 

Parallel

.

Filter Types and Cutoff Frequency

Bypass

[Off, On]

This lets you bypass Filter A completely.

If 

Bypass

 is 

Off

, Filter A functions normally.

When 

Bypass

 is 

On

, Filter A has no effect on the input 

signal.

Trim

[00…99]

This adjusts the volume level at the input to Filter A. If 
you notice that the sound is distorting, especially with 
high Resonance settings, you can turn the level down 
here, or at the Output Level.

Note that the filter will not clip internally, so there is no 
difference between adjusting the Input Trim and the 
Output Level. Either of these controls will allow you to 
minimize clipping later in the signal chain, such as 
may occur in the Drive section and in some effects.

Output Level

[00…99]

This controls the output level of Filter A. You can use 
this to balance the volumes of Filters A and B when the 
Routing is set to Parallel, or to turn down the volume 
to avoid clipping later in the signal chain.

Low Pass

High Pass

Band Pass

Band Reject

Cutoff Frequency

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

Samsung VG-KBD2000 Manual preview
VG-KBD2000
Brand: Samsung Pages: 10
Samsung EJ-BT230 Quick Start Manual preview
EJ-BT230
Brand: Samsung Pages: 11
Hama SL 570 Operating Instruction preview
SL 570
Brand: Hama Pages: 4
ID Tech VersaKey Compact Series Quick Start Manual preview
VersaKey Compact Series
Brand: ID Tech Pages: 16
Avid Technology Avid KeyStudio User Manual preview
Avid KeyStudio
Brand: Avid Technology Pages: 46
Aspire PockeX User Manual preview
PockeX
Brand: Aspire Pages: 27
Besta All Pass S1 Manual preview
All Pass S1
Brand: Besta Pages: 9
Ttesports Challenger Pro User Manual preview
Challenger Pro
Brand: Ttesports Pages: 78
Naxa NSW-11 Instruction Manual preview
NSW-11
Brand: Naxa Pages: 22
Gazer PA40R User Manual preview
PA40R
Brand: Gazer Pages: 48
Hamlet XRFKEYPADTV User Manual preview
XRFKEYPADTV
Brand: Hamlet Pages: 6
Storm 1200 Application/Engineering Manual preview
1200
Brand: Storm Pages: 18
Indel B DAF XF E6 Instructions For Use Manual preview
DAF XF E6
Brand: Indel B Pages: 8
Cross Technologies 3116-66T42 Instruction Manual preview
3116-66T42
Brand: Cross Technologies Pages: 16
BEALE AK280 User Manual preview
AK280
Brand: BEALE Pages: 41
APRI FBSN-4FD Assembly Manual preview
FBSN-4FD
Brand: APRI Pages: 5
Nektar impact LX 25 User Manual preview
impact LX 25
Brand: Nektar Pages: 32
Korg POLY-61 Installation Manual preview
POLY-61
Brand: Korg Pages: 8

Brands by name

Popular brands

Load more brands