manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, 88.208.23.73:8080.

Share
Download
background image

Program P7: EG 1-4    7–1: EG 1 (Filter)

201

EG Curve

Attack

[0 (Linear), 1…9, 10 (Exp/Log)]

This sets the curvature of the Attack segment - the 
transition from the Start level to the Attack level.

Decay

[0 (Linear), 1…9, 10 (Exp/Log)]

This sets the curvature of the Decay segment - the 
transition from the Attack level to the Break level.

Slope

[0 (Linear), 1…9, 10 (Exp/Log)]

This sets the curvature of the Slope segment - the 
transition from the Break level to the Sustain level.

Release

[0 (Linear), 1…9, 10 (Exp/Log)]

This sets the curvature of the Release segment - the 
transition from the Sustain level to the Release level.

7–1c: Level Modulation

These settings let you use an AMS source to control the 
Level parameters of the EG. The Start, Attack, and 
Break levels share a single AMS source, but can each 
have different modulation intensities.

By using different settings for each of the three levels, 
you can cause both subtle and dramatic changes to the 
EG shape, as shown below.

EG Level Modulation

Once an EG segment begins, it can’t be modulated

Once the EG has started a segment between two 
points, that segment can no longer be modulated. This 
includes both the time of the segment, and the level 
reached at the end of the segment.

For instance, if the EG is in the middle of the Decay 
time, you can no longer modulate either the Decay 
time or the Break level.

As another example, let’s say that you’ve assigned the 
Common LFO to modulate Break Level. The LFO may 
be moving all the time, but the Break Level is only 
affected by the LFO’s value at the instant that the 
Decay segment starts. After that, the level is fixed.

Finally, this also means that modulating the Start level, 
Attack level, or Attack time will not affect notes that 
are already sounding, unless the EG is then reset via 
AMS.

AMS

[List of AMS Sources]

This selects an AMS source to control the EG’s Level 
parameters.

For a list of AMS sources, see “AMS (Alternate 
Modulation Source) List” on page 967.

Start

[–99…+99]

This controls the depth and direction of the AMS 
modulation for the Start level.

For example, if you set the AMS source to Velocity and 
set Start to +99, the Start level will increase as you play 
harder. If you instead set Start to –99, the Start level 
will decrease as you play harder.

Attack

[–99…+99]

This controls the depth and direction of the AMS 
modulation for the Attack level.

Break

[–99…+99]

This controls the depth and direction of the AMS 
modulation for the Break level.

7–1d: Time Modulation

These settings let you use three different AMS sources 
to control the Time parameters of the EG. For each of 
the three AMS sources, the Attack, Decay, Slope, and 
Release times each have their own modulation 
intensities.

EG Time Modulation

AMS1

[List of AMS Sources]

Selects the first AMS source to control the EG’s Time 
parameters. Velocity and Keyboard Track can both be 
useful here, for instance.

For a list of AMS sources, see “AMS (Alternate 
Modulation Source) List” on page 967.

Curve = 0 (Linear)

Curve = 0 (Linear)

Curve = 10 (Exp/Log)

Curve = 10 (Exp/Log)

Original Shape

Positive AMS on Start and Break,

Negative AMS on Attack

Negative AMS on Start,

Attack, and Break

Positive AMS on Start,

Attack, and Break

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

AMS=Velocity, Intensity = a positive (+) value

“Attack”=+, “Decay”=+, 
“Slope”=+, “Release”=+

Softly played note.
Original Shape

“Attack”=+, “Decay”=+, 
“Slope”=+, “Release”=+

Stongly played note.
Times are longer.
Reaches Sustainmore 
slowly.

“Attack”=–, “Decay”=–, 
“Slope”=–, “Release”=–

Stongly played note.
Times are shorter.
Reaches Sustainmore 
quickly.

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

Sven KB-E5700H User Manual preview
KB-E5700H
Brand: Sven Pages: 8
Medion X81019 User Manual preview
X81019
Brand: Medion Pages: 42
Saab 32 025 687 Installation Instructions Manual preview
32 025 687
Brand: Saab Pages: 9
Proxel EPS-DUAL Installation Instructions & User Manual preview
EPS-DUAL
Brand: Proxel Pages: 16
ROCK JAM RJ654 User Manual preview
RJ654
Brand: ROCK JAM Pages: 131
Utopia Plantia Kiss Cartridge User Manual preview
Kiss Cartridge
Brand: Utopia Plantia Pages: 9
VDO TRIM GAUGE Installation Instructions Manual preview
TRIM GAUGE
Brand: VDO Pages: 6
Targus ECOSMART AKB873 User Manual preview
ECOSMART AKB873
Brand: Targus Pages: 9
BIGFUN BF-420 Manual preview
BF-420
Brand: BIGFUN Pages: 4
Brother AX-425 Parts Reference List preview
AX-425
Brand: Brother Pages: 26
JVC EXAD KD-AVX55 Instructions Manual preview
EXAD KD-AVX55
Brand: JVC Pages: 218
Autostart AS PRG-1000 User Manual preview
AS PRG-1000
Brand: Autostart Pages: 8
Technics SX-KN6000 Owner'S Manual preview
SX-KN6000
Brand: Technics Pages: 188
iKey KYB-42-KIOSK Specifications preview
KYB-42-KIOSK
Brand: iKey Pages: 2
Hama EasyLine SL 570 Quick Start Manual preview
EasyLine SL 570
Brand: Hama Pages: 8
perixx PERIBOARD-413 User Manual preview
PERIBOARD-413
Brand: perixx Pages: 21
Totally Wicked eGo-C+ User Manual preview
eGo-C+
Brand: Totally Wicked Pages: 7
Totally Wicked ARC 5 User Manual preview
ARC 5
Brand: Totally Wicked Pages: 11

Brands by name

Popular brands

Load more brands