manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, 88.208.23.73:8080.

Share
Download
background image

Program P4: String    4-5: String Main

249

As a rule of thumb, harmonics which are multiples of 
the denominator will be silent. For instance, if the 

Position

 is set to 20.0, the ratio is 1/5, and so every 

fifth harmonic will be silent: 5, 10, 15, etc. This is like a 
comb filter, with successive, evenly-spaced notches. 

The graphic below shows the shape of this comb filter, 
and the resulting basic harmonic structure. (Comb 
filters are named because their shape looks a little like 
the teeth of a comb.)

Harmonic structure with Position = 20.0 (ratio = 1/5)

The table below shows a few more settings which 
cancel out specific harmonics:

Effect of Excitation Position on harmonic structure

You can also adjust the positions of the two Pickups, 
which produce similar comb filtering effects. (For more 
information, see “4-8a: Pickup 1” on page 256.) The 
filtering produced by the excitation position and the 
two pickups is cumulative, and can produce complex 
patterns of peaks and valleys in the overall frequency 
response.

AMS

[List of AMS Sources]

This selects a modulation source to control the 

Position

. Modulation is applied only at note-on; while 

the note is sounding, changing the modulation has no 
effect. For a list of AMS sources, see “AMS (Alternate 
Modulation Source) List” on page 967.

Intensity

[-100.0…+100.0]

This controls the depth and direction of the 

Position

 

modulation.

Tracking Mode

[String Track, Keyboard]

This controls the relationship between the pickup 

Position

 and the pitch.

String Track

 scales the position according to the 

current String, as set in the String Track section.

Keyboard

 scales the position according to pitch, 

without taking the String settings into account. This 
might be more appropriate for clav sounds, for 
instance.

Tone

[-100…+100]

This controls the affect of the 

Position

 on the overall 

tone. When 

Tone

 is set to 0, 

Position

 has no effect.

–100

 is generally the most realistic, although other 

settings may give good results depending on the 
particular excitation signal. 

–100

 also works well to 

counteract the low-end “thump” which can be caused 
by low-frequency excitation signals, including plucks 
with very low (or negative) 

Width

 values.

Other 

Tone

 settings will make the comb filter 

described under 

Position

, above, work differently. 

Settings between –100 and 0 will reduce the effect of 
the filter, until–at 0–it has no effect at all. Positive 
settings will make the filter work in reverse, 
reinforcing harmonics instead of eliminating them.

What does Tone do?

When you pluck a real string, the string vibrates 
outward in both directions from the excitation 
position. These two vibrations bounce off their 
respective ends of the string, return in the opposite 
direction, and interact with each other along the way, 
affecting the timbre of the string.

In the real world, this can’t be changed–but the Tone 
parameter lets you bend the physics a bit. This is 
useful, in part, because some of the things you can use 
to “pluck” the string–such as a PCM sample–aren’t 
things you could use in the real world, either. The Tone 
parameter gives you another tool adjust the way that 
these unusual excitations affect the timbre.

Put simply, Tone lets you pluck the same string twice, 
in the same place, with the waves from each pluck 
moving in only one direction. One of these plucks–
think of it as the one that moves the wave “forward”–
always works in the physical way. Tone controls the 
pluck that moves the wave “backwards.”

“Plucking” the string with different Tone settings

4-5b: Harmonic

This models pressing down lightly (or firmly) in the 
middle of the string, like playing harmonics on a 
guitar.

Position

Ratio of string 

length

Effect

50.0

1/2

Odd harmonics are silent, 
like a square-wave.

33.3

1/3

Every third harmonic is 
silent: 3, 6, 9 etc.

25.0

1/4

Every fourth harmonic is 
silent: 4, 8, 12 etc.

20.0

1/5

Every fifth harmonic is 
silent: 5, 10, 15 etc.

1

Harmonics:

Shape of comb filter:

Volume

2

3

4

5

Silent Harmonics:

6 7 8 9

10

15

Excitation Position

Wave

Wave

Tone = -100

Tone = 0

Tone = +100

String

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

Octane Fitness PRO4700 Assembly And Operation Instructions Manual preview
PRO4700
Brand: Octane Fitness Pages: 8
BASE12 HW086 Product Manual preview
HW086
Brand: BASE12 Pages: 14
Garmin vivosmart HR/HR+ Owner'S Manual preview
vivosmart HR/HR+
Brand: Garmin Pages: 16
Razer Lycosa Gaming Keyboard User Manual preview
Lycosa Gaming Keyboard
Brand: Razer Pages: 24
GETT CK4W Quick Start preview
CK4W
Brand: GETT Pages: 2
Hama Slimline SL 640 Operating Instruction preview
Slimline SL 640
Brand: Hama Pages: 6
Irxon Mini Bluetooth Keyboard User Manual preview
Mini Bluetooth Keyboard
Brand: Irxon Pages: 8
HausBell BW series User Manual preview
BW series
Brand: HausBell Pages: 16
Dometic MagicWatch MWE7006 Programming Instructions Manual preview
MagicWatch MWE7006
Brand: Dometic Pages: 240
CCTV Discover JK900 User Instruction preview
JK900
Brand: CCTV Discover Pages: 10
ARP Instruments 2600 Service Manual preview
2600
Brand: ARP Instruments Pages: 53
Wismec Theorem Quick Manual preview
Theorem
Brand: Wismec Pages: 2
POSIFLEX KB-6600 Series Technical Manual preview
KB-6600 Series
Brand: POSIFLEX Pages: 36
Razer RC30-030702 Product Manual preview
RC30-030702
Brand: Razer Pages: 35
Fomis TP4-022 Quick Start Manual preview
TP4-022
Brand: Fomis Pages: 6
Zagg Messenger Universal Instructions Manual preview
Messenger Universal
Brand: Zagg Pages: 23
Bakker Elkhuizen UltraBoard 950 User Manual preview
UltraBoard 950
Brand: Bakker Elkhuizen Pages: 9
i-Cell OBU S900 Quick Start Manual preview
OBU S900
Brand: i-Cell Pages: 56

Brands by name

Popular brands

Load more brands