manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, 88.208.23.73:8080.

Share
Download
background image

Program P4: Main    4-1: Main

313

KBD TRACK

[0.0…150.0]

Adjusts the depth to which the cutoff frequency will 
change according to the note number, centered at C3.

With a setting of 100, the change in cutoff frequency 
will be proportionate to the change in pitch (1 octave in 
pitch = 1 octave in filter frequency).

Note

: unlike some of the other EX

i

, the PolysixEX 

keyboard tracking does not include the effects of pitch 
bend. This matches the behavior of the original 
synthesizer. If desired, you can create the same effect 
by using JS X as an AMS source for the 

VCF CUTOFF

.

4-1d: EG

EG

ATTACK

[0.00...10.00]

Adjusts the time from note-on until the maximum level 
is reached. 

This is scaled by MIDI CC# 73.

DECAY

[0.00...10.00]

Adjusts the time the EG takes to descend from the peak 
to the sustain level.

This is scaled by MIDI CC# 75.

SUSTAIN

[0.00...10.00]

Adjusts the sustain level. The EG will stay at this level 
until the note is released. 

This is scaled by MIDI CC# 70.

RELEASE

[0.00...10.00]

Adjusts the time from the note-off until the level 
decays to zero.

This is scaled by MIDI CC# 72.

Using separate EGs for the VCF and VCA

Unlike the original Polysix, the PolysixEX lets you use 
separate EGs for the VCF and the VCA. To do so:

1. Set the VCA MODE switch to EG.
2. Set the VCF EG INTENSITY to 0.00.
3. Select the CUTOFF parameter.
4. In the Parameter Details panel for CUTOFF, select 

EG2 as the AMS source.

5. Set the AMS Intensity as desired.

Now, the original EG will control the VCA, and EG2 
will control the VCF.

4-1e: VCA

VCA stands for Voltage Controlled Amplifier, which is 
the circuit that controls the volume of an analog 
synthesizer.

MODE

[EG, Gate]

This selects the main control source for the volume.

EG

 means that the volume is controlled by the ADSR 

envelope.

You can also use EGs 2 or 3 to modulate the main 

VOLUME

 parameter via AMS.

Gate

 means that the volume goes to maximum 

immediately at note-on, and falls to silence 
immediately at note-off.

ATTENUATOR

[–20.0…+20.0dB]

Adjusts the volume up or down by 20dB, in 0.1 dB 
increments. This is separate from the main 

VOLUME

 

knob, below.

Also, unlike 

VOLUME

, the 

ATTENUATOR

 is per-

voice, which means that you can modulate it via per-
voice AMS sources such as EGs, LFOs 1 and 2, key 
tracking, etc.

4-1f: OUTPUT

PAN

[Random, L001…C064…R127]

This controls the stereo pan of the PolysixEX, at the 
very end of the signal chain. A setting of 

L001

 places 

the sound at the far left, 

C064

 in the center, and 

R127

 to 

the far right.

When this is set to 

Random

, the pan position will be 

different for each note-on.

You can also set this Pan parameter directly from the 
Control Surface knobs. To do so:

1. Press the Control Surface Timbre/Track button.
2. Set the MIXER KNOBS switch to INDIVIDUAL 

PAN.

3. Move Knob 1 to set the pan for EX

i

 1, and Knob 2 

to set the pan for EX

i

 2.

You can also control pan via MIDI Pan (CC#10). A 
CC#10 value of 0 or 1 places the sound at the far 
left, 64 places the sound at the location specified by 
the “Pan” parameter, and 127 places the sound at 
the far right.

Note: you can select Random pan only from the on-
screen UI, and not from AMS, MIDI or the Control 
Surface.

Note that this is a post-effects pan, while 

Unison 

Stereo Spread

 is pre-effects:

Pan via 

Unison Stereo Spread

 -> PolysixEX Effects 

(stereo) -> 

PAN

 knob (stereo in-out)

In the PolysixEX, 

PAN

 affects all voices at once, and so 

it cannot be modulated by per-voice AMS sources such 
as EGs or LFOs 1 and 2.

Note-on

Note-off

Attack

Time

Decay

Time

Release

Time

Change to
Parameter
Value

Sustain

Level

Time

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

X-Bows Nature Operating Instructions preview
Nature
Brand: X-Bows Pages: 4
FEKER Alice 80 User Manual preview
Alice 80
Brand: FEKER Pages: 4
RAPTURE RPT-GEKC10RB User Manual preview
RPT-GEKC10RB
Brand: RAPTURE Pages: 16
Hunt CCTV HKB-1100KI User Manual preview
HKB-1100KI
Brand: Hunt CCTV Pages: 120
Life Fitness Video Gaming Accessories User Manual preview
Video Gaming Accessories
Brand: Life Fitness Pages: 51
Hama Slimline SL 640 Operating Instruction preview
Slimline SL 640
Brand: Hama Pages: 6
ViewSonic VSACC25612-1 User Manual preview
VSACC25612-1
Brand: ViewSonic Pages: 15
Rapoo E6100 Quick Start Manual preview
E6100
Brand: Rapoo Pages: 2
GameSir GK300 User Manual preview
GK300
Brand: GameSir Pages: 14
SMK-Link VERSAPOINT VP6220 Specifications preview
VERSAPOINT VP6220
Brand: SMK-Link Pages: 2
Lippert Components Lippert Insight Owner'S Manual preview
Lippert Insight
Brand: Lippert Components Pages: 10
Valeo beep&park/vision Instruction Manual preview
beep&park/vision
Brand: Valeo Pages: 72
Palm Portable Keyboard Handbook preview
Portable Keyboard
Brand: Palm Pages: 24
Vaporesso XROS 3 User Manual preview
XROS 3
Brand: Vaporesso Pages: 31
Saitek Eclipse PZ10A User Manual preview
Eclipse PZ10A
Brand: Saitek Pages: 11
NavInc RT3 VAN Manual preview
RT3 VAN
Brand: NavInc Pages: 4
NavLinkz RL4-MIB101 Manual preview
RL4-MIB101
Brand: NavLinkz Pages: 26
Unisen KP-810-25BTT User Manual preview
KP-810-25BTT
Brand: Unisen Pages: 19

Brands by name

Popular brands

Load more brands