manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, 88.208.23.73:8080.

Share
Download
background image

Combination P0: Play    0–6: KARMA GE

329

Module ID

[A, B, C, D, P]

Indicates which parameters you are controlling from 
the KARMA SLIDERS or KARMA SWITCHES.

A, B, C, D:

 Indicates the KARMA Module that is being 

controlled. In this case, you are controlling a GE Real-
Time Parameter.

P:

 Indicates that the slider or switch is controlling a 

Performance Real-Time Parameter.

Parameter No.

[01…32]

When “Module ID” is A,B,C or D (KARMA Module), 
this area indicates the GE Real-Time Parameter 
number 01–32 that you are controlling (displayed in 
pages 7–5: GE Real-Time Parameters). If “Module ID” 
is P, this area indicates the Performance Real-Time 
Parameter number 01–08 (displayed in pages 7–6: 
Performance Real-Time Parameters) that you are 
controlling.

Parameter Value

This area indicates the value of the GE Real-Time 
Parameter or Performance Real-Time Parameter you 
are controlling. The value will change as you move the 
slider or operate the switch.

A slider or switch can have multiple parameters 
assigned to it. A maximum of four assigned 
parameters can be displayed here in the available 
space. If there are more, they will not be displayed 
(but a “>” will be added to the end of the line). They 
will still function when the control is activated, but 
you cannot view their values directly.

0–6c: Note/CC Activity

A (Module A)

CCs/Notes

This is a real-time display of the notes or CC# message 
generated by the KARMA Modules (Module [A], [B], 
[C], [D]).

Scan Zone

The key zone settings of the KARMA Module are 
displayed as a solid blue line under the notes display.

For more information, see “Bottom (Key Zone 
Bottom)” on page 376.

B, C, D (Modules B, C, D)

This area shows the CCs/Notes and Scan Zone for 
Modules B through D. These settings are the same as 
for “A (Module A),” above.

0–6d: Realtime Controls

This displays the names and settings of KARMA 
SLIDERS 1–8 and KARMA SWITCHES 1–8.

1…8

The current setting of the KARMA SWITCH or 
KARMA SLIDER is shown here, which is linked with 
the operation of the front panel switch or slider.

Then, you could get rid of the section that says:2-8 are 
the same as 1 etc.

KARMA SWITCH 1

The current setting of KARMA SWITCH 1 is shown 
here. This is linked with the operation of switch 1. You 
can also operate this by touching the switch shown in 
the display.

KARMA SWITCH 1 Stored Value

This indicates the setting of KARMA SWITCH 1 that is 
written into the program.

KARMA SWITCH 1 Control Timbre Category Name

This indicates the category of the program used by the 
timbre that is being played from the KARMA Module.

This will indicate Multi if a single KARMA Module is 
playing multiple timbres of differing categories.

KARMA SWITCH 1 Name

This indicates the name of KARMA SWITCH 1.

You can assign this name in Combination 7–9: 
Name/Map.

KARMA SLIDER 1

This indicates the current setting of KARMA SLIDER 
1. This is linked with the operation of slider 1. You can 
also operate this by touching the slider head and 
adjusting the value with the Value Slider, the 
Up/Down Keys, the data Wheel, etc.

KARMA SLIDER 1 Stored Value

This indicates the setting of slider 1 that is written into 
the program.

KARMA SLIDER 1 Control 
Timbre Category Name

This indicates the category of the program used by the 
timbre that is being played from the KARMA Module.

This will indicate Multi if a single KARMA Module is 
playing multiple timbres of differing categories.

KARMA SLIDER 1 Name

This indicates the name of KARMA SLIDER1.

You can assign this name in Combination 7–9: 
Name/Map.

▼ 

0–6: Page Menu Commands

The number before each command shows its ENTER + 
number-key shortcut. For more information on these 
shortcuts, see “ENTER + 0-9: shortcuts for menu 
commands” on page 138.

• 0: 

Write Combination

. For more information, see 

“Write Combination” on page 405.

• 1: 

Exclusive Solo

. For more information, see 

“Exclusive Solo” on page 138.

• 2: 

Copy From Program

. For more information, see 

“Copy From Program” on page 405.

• 3: 

Copy KARMA Module

. For more information, 

see “Copy KARMA Module” on page 408.

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

Azio KB335 User Manual preview
KB335
Brand: Azio Pages: 5
Sven KB-E5700H User Manual preview
KB-E5700H
Brand: Sven Pages: 8
Pyramid Imaging CAMERA LINKT CLT-351L User Manual preview
CAMERA LINKT CLT-351L
Brand: Pyramid Imaging Pages: 49
Logitech diNovo Edge Specifications preview
diNovo Edge
Brand: Logitech Pages: 2
M-Audio Oxygen 61 Quick Start Manual preview
Oxygen 61
Brand: M-Audio Pages: 44
Honeywell GKP-S8M User Manual preview
GKP-S8M
Brand: Honeywell Pages: 18
Honeywell HEGS5BLX User Manual preview
HEGS5BLX
Brand: Honeywell Pages: 32
Honeywell HD-JC-010 User Manual preview
HD-JC-010
Brand: Honeywell Pages: 51
Honeywell UltraKey Lite HJC5000 Installation And User Manual preview
UltraKey Lite HJC5000
Brand: Honeywell Pages: 72
Lenovo Wireless Mouse N30 User Quick Manual preview
Wireless Mouse N30
Brand: Lenovo Pages: 16
AVYCON AVK-N1100 Quick Start Manual preview
AVK-N1100
Brand: AVYCON Pages: 28
Philips SPK3700BC/97 User Manual preview
SPK3700BC/97
Brand: Philips Pages: 2
Philips SPK3700BC/61 User Manual preview
SPK3700BC/61
Brand: Philips Pages: 2
Philips SPK1700BC/97 User Manual preview
SPK1700BC/97
Brand: Philips Pages: 2
Philips SPK1000SC/93 User Manual preview
SPK1000SC/93
Brand: Philips Pages: 2
Philips SPK1700BC/61 User Manual preview
SPK1700BC/61
Brand: Philips Pages: 2
Philips LTC 2601/00 Installation Instructions preview
LTC 2601/00
Brand: Philips Pages: 2
Philips LFH2370 User Manual preview
LFH2370
Brand: Philips Pages: 2

Brands by name

Popular brands

Load more brands