manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, 88.208.23.73:8080.

Share
Download
background image

Sequencer mode

526

Note:

 When this dialog box is not open, you can hold 

down the ENTER switch and press the LOCATE 
switch to set the current location as the “Set Location” 
value.

GM Initialize

This command transmits a GM System On message to 
the Sequencer mode, resetting all MIDI tracks to the 
GM settings (See “GM Initialize List” on page 527).

1. Select “GM Initialize” to open the dialog box.

2. To execute the settings, press the OK button. To 

cancel, press the Cancel button.

In Sequencer mode, when a GM System On 
message is received from an external device, or if a 
GM System On message is recorded in the sequence 
data, the OASYS will be reset to settings appropriate 
for GM just as if you had executed this command. 
However, in these cases, the various P9: 
Master/Total Effect parameters will not be reset.

Copy from Combination

This command copies the parameters of the specified 
combination to the setting data of the currently 
selected song.

N

ote: Only the timbres used by the combination will be 

copied. Timbres in the combination whose Status is Off 
will not be copied. If any timbres are set to Mute, the 
corresponding tracks of the song will be set to a 

Status

 

of Off. However if none of the timbres used in the 
combination have a MIDI channel setting of Gch, a 
MIDI track whose MIDI channel is Gch will 
automatically be specified, and that track will be 
selected in Track Select. After the copy is executed, you 
will immediately be able to play in the same state as 
that combination.

1. Select “Copy from Combination” to open the 

dialog box.

2. In “Combination,” select the copy source 

destination.

3. Use the IFX-All

,

 IFX-All used

,

 MFXs and TFXs 

check boxes to specify whether you want the effect 
settings of the combination to be copied as well.

IFX-All:

 All insert effect settings of the copy-source 

combination (the contents of the Insert FX page and 
the IFX1–12 effect parameters) will be copied.

IFX-All used:

 Only the insert effects that are used 

by the copy-source combination will be copied. 
When copied, they will be packed into unused slots 
(000: No Effect, unless within a chain).

Note:

 Copy-source insert effects that are set to 000: 

No Effect will not be copied. However if 000: No 
Effect is included within a chain, it will be copied.

If an entire chain in the copy-destination consists of 
000: No Effect, it will be used as a copy-destination.

MFXs:

 All master effect settings of the copy-source 

combination will be copied.

TFXs:

 All total effect settings of the copy-source 

combination will be copied.

4. Specify the desired Multi REC Standby setting.

On:

 The Status will automatically be set to REC for 

MIDI tracks corresponding to valid timbres in the 
copy-source combination. In addition, “Multi REC” 
(0–1a) will automatically be turned on, and 

Recording Setup

 (0–5a) will be set to Overwrite.

5. To execute the Copy operation, press the OK 

button. To cancel, press the Cancel button.

Copy From Program

This command copies settings from the program you 
specify to the currently selected song.

This is the same function as in Combination mode; for 
details, see “Copy From Program” on page 405.

This command in Sequencer mode differs from its 
behavior in Combination mode in that the channels 
assigned to the tracks of the song will be preserved 
regardless of the “with KARMA” setting of the copy-
destination track’s “MIDI Channel.” (See step 4.)

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

G.SKILL RIPJAWS KM570 RGB Quick Start Manual preview
RIPJAWS KM570 RGB
Brand: G.SKILL Pages: 20
Avigilon ACC-USB-JOY-PRO Installation Manual preview
ACC-USB-JOY-PRO
Brand: Avigilon Pages: 13
FAME DPP-61 User Manual preview
DPP-61
Brand: FAME Pages: 16
ZIPPY RF666C User Manual preview
RF666C
Brand: ZIPPY Pages: 5
Casio PRIVIA PX-330 User Manual preview
PRIVIA PX-330
Brand: Casio Pages: 72
Kanex K166-1259-UK Quick Start preview
K166-1259-UK
Brand: Kanex Pages: 2
Canon Electronic Dictionary Quick Reference preview
Electronic Dictionary
Brand: Canon Pages: 16
iClever IC-BK10 User Manual preview
IC-BK10
Brand: iClever Pages: 10
Sharp pc-2500 Service Manual preview
pc-2500
Brand: Sharp Pages: 29
Palm 3245WW - Wireless Keyboard With Bluetooth Technology Disassembly Instructions Manual preview
3245WW - Wireless Keyboard With Bluetooth Technology
Brand: Palm Pages: 26
Franklin Bookman III DBD-1450 User Manual preview
Bookman III DBD-1450
Brand: Franklin Pages: 32
Ranger TouchPad BT RG2ACKB486BT User Manual preview
TouchPad BT RG2ACKB486BT
Brand: Ranger Pages: 1
Thermaltake Tt eSPORTS Challenger Elite RGB Combo Software User'S Manual preview
Tt eSPORTS Challenger Elite RGB Combo
Brand: Thermaltake Pages: 10
Wireless Computing RF-600 Operating Instructions preview
RF-600
Brand: Wireless Computing Pages: 2
CrimeStopper BackStopper CA-5005 Install Manual preview
BackStopper CA-5005
Brand: CrimeStopper Pages: 4
PROLiNK PKM-3810B User Manual preview
PKM-3810B
Brand: PROLiNK Pages: 2
PROLiNK PCML-5307G Quick Start Manual preview
PCML-5307G
Brand: PROLiNK Pages: 4
iHome Type Pro IH-IP2104 Quick Start Manual preview
Type Pro IH-IP2104
Brand: iHome Pages: 2

Brands by name

Popular brands

Load more brands