manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, 88.208.23.73:8080.

Share
Download
background image

Sequencer mode

530

3. The settings for the rest of the procedure will 

depend on what you selected in step 2. (For 
details, refer to the explanations below.)

If you selected Initialize:

1. Refer to Auto HDR/Sampling Setup steps 1 and 2, 

and select Initialize.

2. Press the OK button to execute the command. If 

you decide not to execute, press the Cancel button. 

For more information, see “Auto HDR/Sampling 
Setup: Automatically-set parameters and their 
values” on page 533.

If you selected HDR (Audio Track Recording):

1. Refer to Auto HDR/Sampling Setup steps 1 and 2, 

and select HDR (Audio Track Recording). Then 
press the OK button to open the dialog box.

2. In “Source Audio,” select the external audio input 

source.

If the external audio input source is monaural:

Audio Input1 (Mono)…4 (Mono):

 Selects the 

analog audio signal from a mic, musical instrument 
or other device connected to the AUDIO INPUT 1–4 
jacks.

S/P DIF L(Mono), R(Mono):

 Selects the digital 

audio signal from an instrument or DAT deck etc. 
connected to the S/P DIF jack.

If the external audio input source is stereo:

Audio Input1/2(Stereo)…3/4(Stereo):

 Selects the 

stereo analog audio signal from a musical 
instrument or other device connected to the AUDIO 
INPUT1/2 and 3/4 jacks.

S/P DIF L/R(Stereo):

 Selects the stereo digital audio 

signal from an instrument or DAT deck etc. 
connected to the S/P DIF IN jack.

If “Source Audio” is set to S/P DIF, change the 

System Clock

 setting (Global 0–1d).

3. Specify whether you want to apply an insert effect 

to the input source (i.e., to record the processed 

signal). Choose the insert effect you want to use. If 
you don’t want to use an effect, turn this Off.)

Note:

 If you’re using more than one insert effect, 

make settings for the Insert FX page 

Chain

 

parameters after you execute 

Auto HDR/Sampling 

Setup

. For the last insert effect in the chain, set the 

REC Bus

 to 1 (for a mono source) or 1/2 (for a 

stereo source). (At this time, you will normally set 

Bus Select

 to 

Off

–but you don’t have to do so.)

Note:

 You can also record the input source to an 

audio track without applying an insert effect, and 
then send the output of the audio track through an 
insert effect. Make the appropriate 

Bus Select

 

setting in the P8– Audio Routing 1 page for the 
audio track you recorded.

4. Use “Recording Track” to specify the track(s) that 

will be recorded.

If “Source Audio” is set to Audio Input 1 (Mono)–
Audio Input 4 (Mono), S/P DIF L (Mono), or R 
(Mono), choose from Audio Track 1–16.

If “Source Audio” is set to Audio Input 1/2 (Stereo), 
Audio Input 3/4 (Stereo), or S/P DIF L/R (Stereo), 
choose from Audio Tracks 1&2–15&16. When you 
execute the command, the “Stereo Pair setting will 
be made automatically so that you can record in 
stereo.

5. Press the OK button to execute the command. If 

you decide not to execute, press the Cancel button. 

For more information, see “Auto HDR/Sampling 
Setup: Automatically-set parameters and their 
values” on page 533.

Recording to the audio track(s) after executing the 
command

1. Connect your instrument etc. to the AUDIO 

INPUT jack you selected in “Source Audio,” and 
use “Audio Track Recording Level” to adjust the 
recording level.

2. Set “Location” to the location that you want to 

record.

3. Press the SEQUENCER REC/WRITE switch and 

then the SEQUENCER START/STOP switch. 
(Recording will begin.)

4. Play the musical instrument etc. that is connected 

to the AUDIO INPUT jack(s) you selected for 
“Source Audio.”

5. When you have 

fi

nished performing, press the 

SEQUENCER START/STOP switch. (Recording 
will stop.)

Check the audio track(s) that you recorded

• To listen to the audio track you recorded, press the 

SEQUENCER START/STOP switch to play back 
the track.

If you selected Bounce Audio Track:

1. Refer to Auto HDR/Sampling Setup steps 1 and 2, 

and select Bounce Audio Track. Then press the OK 
button to open the dialog box.

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

KAP AUDI 4G HIGHEND Manual preview
AUDI 4G HIGHEND
Brand: KAP Pages: 20
Axxess AX-DSPX-HYKIA2 Installation Instructions preview
AX-DSPX-HYKIA2
Brand: Axxess Pages: 4
KeySonic KSK-6231INEL Manual preview
KSK-6231INEL
Brand: KeySonic Pages: 12
AbleNet Chester Creek BigBlu KinderBoard Quick Start Manual preview
Chester Creek BigBlu KinderBoard
Brand: AbleNet Pages: 11
A4Tech RFKBSTX-5A User Manual preview
RFKBSTX-5A
Brand: A4Tech Pages: 9
Microsoft T9T-00001 Quick Start Manual preview
T9T-00001
Brand: Microsoft Pages: 7
I-Tech YMil-K800 Quick Manual preview
YMil-K800
Brand: I-Tech Pages: 3
Manhattan 177771 Brochure & Specs preview
177771
Brand: Manhattan Pages: 2
R-Go Compact Break Manual preview
Compact Break
Brand: R-Go Pages: 10
Toyota 100 Series Manual preview
100 Series
Brand: Toyota Pages: 11
Logitech TYPE - S Setup Manual preview
TYPE - S
Brand: Logitech Pages: 24
Logitech K800 Getting Started Manual preview
K800
Brand: Logitech Pages: 34
Logitech G913 Manual preview
G913
Brand: Logitech Pages: 51
Logitech 968019-0403 - Classic Keyboard 200 Wired Limited Warranty preview
968019-0403 - Classic Keyboard 200 Wired
Brand: Logitech Pages: 2
Logitech G510 Getting Started preview
G510
Brand: Logitech Pages: 148
Corvette C6-HF Quick Start Bluetooth Installation Manual preview
C6-HF
Brand: Corvette Pages: 8
Hama SL590 Operating Instructions Manual preview
SL590
Brand: Hama Pages: 6
Hama SL532 User Manual preview
SL532
Brand: Hama Pages: 1

Brands by name

Popular brands

Load more brands