manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, 88.208.23.73:8080.

Share
Download
background image

Sampling mode

568

Keyboard & Pads

Keyboard:

 This indicates the index zone of 

multisample, the original key, and the root key. The red 
triangles indicate the keyboard range, and the white 
triangle indicates the C4 key.

Keyboard & Pads

Note:

 The base key (displayed in blue)

• In P1: Sample Edit you can press the SAMPLING 

START/STOP switch to play the sample of the 
selected 

Index

 in one-shot mode from “Start”–

“End.” At this time, the sample will sound at the 
pitch of the base key.

• Playback in the grid display of P1 and P2 will be 

according to the playback pitch of the base key 
selected here, and the specified tempo 
BPM/resolution (set in P1 and P2).

• The “Pitch BPM Adjust” menu command is based 

on the playback pitch of the base key you specify 
here.

Pads:

 By default, pads 1–8 are assigned to C2–G2. 

When you choose an index to which a pad is assigned, 
it is displayed in blue. The index zone, original key, 
and base key of the pads can be viewed and edited in 
the keyboard display or in 0–1b.

0–1b: Index, Sample Select, Original Key, 
Top Key, Create

Here you can set the sample, original key, and range of 
the selected index.

Index

[xxx (001…128)/yyy (001…128)]

Selects the index for which you wish to sample.

Each zone in a multisample is called an 

Index

. For 

example on the 76 note keyboard, a multisample could 
be divided into seven zones of one octave (12 keys) 
each. Each of these zones is referred to as an 

Index

. 

You will assign a sample to each of these indexes.

xxx:

 The selected index. Choose the desired index.

yyy:

 The total number of indexes in the multisample.

Note: 

You can also select an index by holding down the 

ENTER switch and playing a note on the keyboard or 
pad. The index that includes this note will be selected. 
The key you specify will be the base key, and will be 
displayed in blue in “Keyboard & Pads” (“Keyboard & 
Pads”).

This parameter can also be set from P1–P3: 
Multisample. Sampling and editing in the respective 
page will apply to the index that you select here.

Immediately after the power is turned on, this will be 
001/008. This indicates that there are eight indexes, 
and that currently the first index is selected. 

To increase the number of indexes, use “Create” in this 
page. When you press the Create button, indexes will 
automatically be added from the left-most zone, as 
002/002, 003/003, … (The position, zone width, and 
original key location of the index that is created when 
you press the Create button can be set in Create Zone 
Preference (0–1e, 3–1c). You are also free to modify the 
zone width and original key location later.)

Sample Select [----: ---No Assign----, 0000…3999]

Selects a sample that you sampled or loaded in Disk 
mode, and play a note within the index range to sound 
that sample. The sample you select here is the sample 
that will be affected by your sampling and editing 
operations in the various pages. This parameter is also 
available in P1–P3.

----: ---No Assign----:

 No sample is assigned to the 

index. There will be no sound when you play the 
keyboard.

To record a sample, select a vacant sample such as 
0000:. When you record a sample, data will be loaded 
into the selected sample. The sample name (such as 
NewSample_0000) will be shown beside the number. 
This sample name can be modified using the “Rename 
Sample” menu command.

You can also record a sample even when ----:---No 
Assign---- is displayed. In this case, a sample number 
will be selected automatically.

Even if you record to a sample that already contains 
data, the selected sample will not be overwritten –the 
data will automatically be sampled to a vacant sample, 
and the newly recorded sample will replace the 
previous sample in the index. If you wish to delete a 
sample, execute the “Delete Sample” menu command.

Keyboard range

C4 key

Index02 Index03...Index08

Index01

By holding down the ENTER switch and playing a note, you can select the corresponding 
index, and the specified key will be the base key and will be shown in blue.

Pads 1...8 correspond to C2...G2.
If you hold down the ENTER switch and press a pad, that index 
will be selected and displayed in blue.

Original Key (currently selected 
Original Key is displayed in red)

Index zone (currently 
selected Index is reversed)

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

Hama AK-120 Operating Instruction preview
AK-120
Brand: Hama Pages: 2
Hama Slimline SL 640 Operating Instruction preview
Slimline SL 640
Brand: Hama Pages: 6
Hama SL560 Operating Instruction preview
SL560
Brand: Hama Pages: 2
Hama KEY4ALL X510 Series Operating Instruction preview
KEY4ALL X510 Series
Brand: Hama Pages: 19
Hama K 404 Operating Instruction preview
K 404
Brand: Hama Pages: 4
Hama K 202 Instalacion preview
K 202
Brand: Hama Pages: 4
Hama Emerging Operating Instruction preview
Emerging
Brand: Hama Pages: 8
Hama Computer K 404 Operating Instruction preview
Computer K 404
Brand: Hama Pages: 2
Hama AK 220 Installation Instructions preview
AK 220
Brand: Hama Pages: 4
Zagg Rugged Book Go Instructions Manual preview
Rugged Book Go
Brand: Zagg Pages: 26
Sven KB-E5500 User Manual preview
KB-E5500
Brand: Sven Pages: 4
Studiologic VMK-88 plus Manual preview
VMK-88 plus
Brand: Studiologic Pages: 98
cefar ACTIV XT User Manual preview
ACTIV XT
Brand: cefar Pages: 148
Roccat Sova MK Quick Installation Manual preview
Sova MK
Brand: Roccat Pages: 2
Kenwood SJM550 series Instructions Manual preview
SJM550 series
Brand: Kenwood Pages: 90
Kenwood SJM240 series Manual preview
SJM240 series
Brand: Kenwood Pages: 55
Fatar ST-490 Plus User Manual preview
ST-490 Plus
Brand: Fatar Pages: 4
Casio CT-X870IN User Manual preview
CT-X870IN
Brand: Casio Pages: 74

Brands by name

Popular brands

Load more brands