manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, 88.208.23.73:8080.

Share
Download
background image

Sampling mode

624

3. The range to be edited is shown by Range “Start” 

and “End.”

4. In “Save to No.,” specify the save destination 

sample number. By default, an unused sample 
number will be selected.

The sample number cannot be specified if 
“Overwrite” is checked (page 615).

 For stereo samples, use “Save to No.(L)” and 

“(R)” to specify the save-destination of the L and R 
channels.

5. To execute the Clear command, press the OK 

button. To cancel, press the Cancel button.

Copy

This command copies the sample data from the area 
between “Start”–“End” into the sample data buffer. 
This data can then be used by the “Insert,” “Mix” or 
“Paste” commands.

When you execute “Copy,” the data that is copied 
into the buffer actually consists only of the copy-
source sample number, the “Start” and “End” 
locations and not the data itself. Do not delete the 
copy-source sample until you finish executing the 
“Insert,” “Mix,” or “Paste” command.

1. Use “Sample Select” (1–1b) to select the sample 

that you wish to edit, and use “Start” and “End” to 
specify the editing range.

You can press the SAMPLING START/STOP switch 
or Play button to hear the portion that will be 
copied by the “Copy” command.

2. Select “Copy” to open the dialog box.

3. The range to be copied is shown by Range “Start” 

and “End.”

4. To execute the Copy command, press the OK 

button. To cancel, press the Cancel button.

Insert

When you execute this command, the sample data 
placed in the buffer by executing “Copy” in the 
Sampling mode Sample Edit page will be inserted at 
the “Start” address. The data that follows this address 
will be moved toward the end of the sample.

1. Use “Sample Select” (1–1b) to select the sample 

that you wish to edit, and set “Start” to specify the 
starting address. The “End” setting is ignored.

2. Select “Insert” to open the dialog box.

3. To “Start” will indicate the starting address at 

which the data will be inserted.

4. In “Save to No.,” specify the save destination 

sample number. By default, an unused sample 
number will be selected.

The sample number cannot be specified if 
“Overwrite” is checked (page 615).

 For stereo samples, use “Save to No.(L)” and 

“(R)” to specify the save-destination of the L and R 
channels.

5. To execute the Insert command, press the OK 

button. To cancel, press the Cancel button.

If the buffer into which data was placed by the 
“Copy” command contains no data, the display will 
indicate “Source sample is empty.”

Mix

When you execute this command, the sample data 
placed in the buffer by executing “Copy” in the 
Sampling mode Sample Edit page will be mixed with 
the selected sample data, starting at the “Start” 
address.

1. Use “Sample Select” (1–1b) to select the sample 

that you wish to edit, and set “Start” to specify the 
starting address. The “End” setting is ignored.

2. Select “Mix” to open the dialog box.

3. To “Start” will indicate the starting address at 

which the data will be mixed.

4. In “Save to No.,” specify the save destination 

sample number. By default, an unused sample 
number will be selected.

The sample number cannot be specified if 
“Overwrite” is checked (page 615).

From the buffer

From the buffer

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

Razer Huntsman Elite Common Questions preview
Huntsman Elite
Brand: Razer Pages: 3
C-KO RS-4-18-R-I Fitting Instructions preview
RS-4-18-R-I
Brand: C-KO Pages: 4
Unitech K2714 Setup Manual preview
K2714
Brand: Unitech Pages: 3
Steelmate PTS800V7 User Manual preview
PTS800V7
Brand: Steelmate Pages: 14
Krüger & Matz KM0758 Owner'S Manual preview
KM0758
Brand: Krüger & Matz Pages: 20
Igo CE4+ User Manual preview
CE4+
Brand: Igo Pages: 2
Resolution Products RE224GH Manual preview
RE224GH
Brand: Resolution Products Pages: 2
Runtastic TP00270 Operation Manual preview
TP00270
Brand: Runtastic Pages: 16
Life Fitness OST Assembly Instructions Manual preview
OST
Brand: Life Fitness Pages: 26
ikbc typemaster X400 User Manual preview
typemaster X400
Brand: ikbc Pages: 5
Logitec MK330 Quick Start Manual preview
MK330
Brand: Logitec Pages: 2
NGS GKX-450 User Manual preview
GKX-450
Brand: NGS Pages: 132
Kensington KeyFolio Exact Plus Quick Start Manual preview
KeyFolio Exact Plus
Brand: Kensington Pages: 96
Tumi 014393GM Manual preview
014393GM
Brand: Tumi Pages: 22
GeoVision GV-Keyboard V3 User Manual preview
GV-Keyboard V3
Brand: GeoVision Pages: 58
IDTECH DKA-334 series User Manual preview
DKA-334 series
Brand: IDTECH Pages: 18
Diablotek KYB-107U Specifications preview
KYB-107U
Brand: Diablotek Pages: 1
vioguard UVKB50 User Manual preview
UVKB50
Brand: vioguard Pages: 8

Brands by name

Popular brands

Load more brands