manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, 88.208.23.73:8080.

Share
Download
background image

Program P2: OSC/Pitch    2–2: OSC1 Pitch

55

• Set an initial amount of LFO modulation, using the 

LFO 1/2 Intensity parameters.

• Use JS+Y to scale the amount of the LFO.

• Use any AMS source to scale the amount the LFO.

You can use each of these methods for each of the two 
LFOs. The results are added together to produce the 
total LFO effect.

LFO1

LFO1 Intensity

[–12.00…+12.00]

This controls the initial effect of the LFO on the pitch, 
in semitones, before any JS+Y or AMS modulation.

Negative (–)

 settings will invert the phase of the LFO.

JS+Y Intensity (LFO1 JS+Y Int.) [–12.00…+12.00]

Moving the joystick “up” from the center detent 
position, away from yourself, produces the JS+Y 
controller. You can use this to scale the amount of the 
LFO applied to the pitch. This parameter sets the 
maximum amount of LFO modulation added by JS+Y, 
in semitones.

As this value is

 increased

, moving the joystick in the 

+Y direction will cause the OSC1 LFO1 to produce 
deeper pitch modulation. 

Negative (–)

 settings will invert the phase of the LFO. 

You can also use this to reduce the initial amount of the 
LFO, as set by 

LFO1 Intensity

, above. For example:

1. Set LFO1 Intensity to +7.00.

The LFO will now have a fairly strong effect on the 
pitch, bending it by a perfect 5th.

2. Set JS+Y Intensity to –7.00.

Now, if you move the joystick up, the effect of the LFO 
will fade away. When the joystick is all the way at the 
top of its range, the LFO will be completely cancelled 
out.

AMS (LFO1)

[List of AMS Sources]

This selects any AMS modulation source to scale the 
amount of the LFO applied to pitch.

For a list of AMS sources, see “AMS (Alternate 
Modulation Source) List” on page 967.

Intensity

[–12.00…+12.00]

This controls the depth and direction of the LFO AMS 
modulation for pitch.

For example, if 

AMS 

is set to 

After Touch

, 

positive

 

settings mean that aftertouch will increase the amount 
of pitch modulation from LFO1.

LFO2

The parameters for LFO2 are identical to those for 
LFO1. For more information, see the descriptions 
under LFO1, above.

2–2d: Portamento

Portamento lets the pitch glide smoothly between 
notes, instead of changing abruptly. 

Enable

[Off, On]

On (checked):

 Turns on Portamento, so that pitch 

glides smoothly between notes.

Off (unchecked):

 Turns off Portamento. This is the 

default state.

Fingered

[Off, On]

This parameter allows you to control Portamento 
through your playing style. When it’s enabled, playing 
legato will turn on Portamento, and playing detached 
will turn it off again.

This option is only available when Portamento Enable 
is turned on.

On (checked):

 Turns on Fingered Portamento.

Off (unchecked):

 Turns off Fingered Portamento.

Mode

[Constant Rate, Constant Time]

Constant Rate means that Portamento will always take 
the same amount of time to glide a given distance in 
pitch - for instance, one second per octave. Put another 
way, gliding several octaves will take much longer 
than gliding a half-step.

Constant Time means that Portamento will always take 
the same amount of time to glide from one note to 
another, regardless of the difference in pitch. This is 
especially useful when playing chords, since it ensures 
that each note in the chord will end its glide at the 
same time.

Time

[000…127]

This controls the portamento time. Higher values 
mean longer times, for slower changes in pitch. 

This option is only available when Portamento Enable 
is turned on.

Assigning SW1 or SW2 to Portamento On/Off

You can use the two assignable switches, SW1 and 
SW2, to turn portamento on and off.

To do so:

1. Go to the Program P1–Set Up Controllers page.
2. Under Panel Switch Assign, set either SW1 or SW2 

to Portamento SW (CC#65).

Now, the selected switch will enable and disable 
Portamento. It will also send the MIDI Portamento 
controller, CC#65.

Even if you don’t assign SW1/2 to Portamento, you 
can still use MIDI Controller #65 to turn Portamento 
on and off.

▼ 

2–2: Page Menu Commands

The number before each command shows its ENTER + 
number-key shortcut. For more information on these 
shortcuts, see “ENTER + 0-9: shortcuts for menu 
commands” on page 138.

• 0: 

Write Program

. For more information, see “Write 

Program” on page 138.

• 1: 

Exclusive Solo

. For more information, see 

“Exclusive Solo” on page 138.

• 2: 

Copy Oscillator

. For more information, see 

“Copy Oscillator” on page 144.

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

Deltaco TB-115 User Manual preview
TB-115
Brand: Deltaco Pages: 8
Logitech 967684 0403 - Alto Wired Keyboard User Manual preview
967684 0403 - Alto Wired Keyboard
Brand: Logitech Pages: 2
Crux RVCFD-79 Manual preview
RVCFD-79
Brand: Crux Pages: 10
NavInc USB-PEU-RD4 User Manual preview
USB-PEU-RD4
Brand: NavInc Pages: 5
Volvo ECS Training Tips And Tactics preview
ECS
Brand: Volvo Pages: 193
Franklin BOOKMAN COL-640 User Manual preview
BOOKMAN COL-640
Brand: Franklin Pages: 28
Korg POLYSIX Service Manual preview
POLYSIX
Brand: Korg Pages: 29
Korg PA60 Service Manual preview
PA60
Brand: Korg Pages: 37
Korg PA 600 Quick Manual preview
PA 600
Brand: Korg Pages: 96
POSIFLEX KB-6600 Series Technical Manual preview
KB-6600 Series
Brand: POSIFLEX Pages: 36
perixx PERIBOARD-312 User Manual preview
PERIBOARD-312
Brand: perixx Pages: 13
perixx PERIBOARD-317 User Manual preview
PERIBOARD-317
Brand: perixx Pages: 21
perixx PERIBOARD-107 User Manual preview
PERIBOARD-107
Brand: perixx Pages: 13
Franklin Language Master LM-2000 User Manual preview
Language Master LM-2000
Brand: Franklin Pages: 15
Franklin KID-240 Speaking Homework Wiz User Manual preview
KID-240 Speaking Homework Wiz
Brand: Franklin Pages: 24
Franklin IC-147 User Manual preview
IC-147
Brand: Franklin Pages: 28
Franklin IC-152 User Manual preview
IC-152
Brand: Franklin Pages: 40
Franklin IC-112 User Manual preview
IC-112
Brand: Franklin Pages: 33

Brands by name

Popular brands

Load more brands