manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, 88.208.23.73:8080.

Share
Download
background image

Disk: Page Menu Commands    Write to CD

725

Write to CD

When this command is executed, the WAVE files 
specified in the audio CD track list will be written as 
audio CD tracks. If desired, you can also finalize the 
disc at this time.

When writing data to CD-R/RW media, the media 
containing the Wave files must have free space 
equal in size to the Wave files you are writing. 
Before you execute this operation, make sure that 
the drive containing the Wave files contains enough 
free space.

1. Create an audio CD track list, use “Drive Select” to 

select the CD-R/RW drive, and make sure that CD-
R/RW media is inserted in the drive.

2. Select “Write to CD” to open the dialog box.

3. Use “Speed” to specify the writing speed. The 

writing speeds supported by your CD-R/RW drive 
will be displayed.

Be aware that if your system has a slower data 
transfer rate, using an excessively fast writing speed 
will produce writing errors. Depending on the drive 
you are using, problems with the speed may make it 
impossible to write, but you can perform a test 
beforehand to identify such problems. It is a good 
idea to perform a test write when you write for the 
first time, to verify the speed limitations of your 
drive.

If the audio CD track list contains WAVE files 
located on an external USB 1.1 type hard disk, 
writing errors may occur even if you specify the 
slowest writing speed. If this occurs, copy the 
WAVE files to the internal hard disk, and change the 
audio CD track list so that it uses the copied WAVE 
file located on the internal hard disk.

Use “

Mode

” to specify the writing method.

Test:

 Tests whether the data can be written correctly. 

Data will not actually be written to the CD-R/RW 
media, but all other processing will occur just as if 
data were actually being written. Use this when you 
want to check whether writing can be performed 
correctly. If an error occurs, the display will indicate 
“Error in writing to medium.”

Test and Write: 

A test write will be performed, and 

if the test is successful, the disc will actually be 
written. We recommend that you use this method 
for fast writing speeds.

Write: 

The media will only be written.

4. Specify whether the CD-R/RW media will be 

fi

nalized after the audio CD tracks have been 

written to it.

If “Execute finalize too” is checked, the disc will be 
finalized.

If this is not checked, the disc will not be finalized.

Note:

 If you want only to finalize the disc, use 

“Finalize Audio CD.”

5. Press the OK button to execute writing or test 

writing to the CD-R/RW media, or press the 
Cancel button to cancel without executing.

WAVE files with a 48 kHz sampling frequency will 
be converted to 44.1 kHz when they are written.

In order for this processing to be performed, free 
space of approximately the same size as the WAVE 
file to be converted will be required on the drive 
that contains the WAVE file. Before executing, 
please make sure that the drive containing the 
WAVE file has enough free space.

Note: 

If the track is shorter than 4 seconds, silence will 

be automatically added to increase the length to 4 
seconds.

Note: 

Two seconds of silence will be added to the end 

of each track except the last track.

Finalize Audio CD

This command finalizes CD-R/RW media to which 
audio CD tracks have already been written.

1. Use “Drive Select” to select the drive, and make 

sure that the drive contains valid media.

2. Select “Finalize Audio CD” to open the dialog 

box.

3. Press the OK button to execute the Finalize 

command, or press the Cancel button to cancel 
without executing.

Erase CD-RW

This command erases the audio CD tracks from CD-
RW media.

1. Use “Drive Select” to select the drive, and make 

sure that it contains data.

2. Select “Erase CD-RW” to open the dialog box.

3. Select the mode by which the audio CD tracks will 

be erased.
Quick Erase:

 Normally you will select this.

Full Erase:

 The data will be erased completely. 

Substantial time will be required for the erasure.

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

Acer PREDATOR AETHON 500 Quick Start Manual preview
PREDATOR AETHON 500
Brand: Acer Pages: 7
Tascam FireOne Owner'S Manual preview
FireOne
Brand: Tascam Pages: 24
Conrad 85 51 49 Operating Instructions Manual preview
85 51 49
Brand: Conrad Pages: 50
BOW HB022S User Manual preview
HB022S
Brand: BOW Pages: 6
Kogan KAMKBBNTKLA Quick Start Manual preview
KAMKBBNTKLA
Brand: Kogan Pages: 2
Cherry G81-8000-LPBUS Specifications preview
G81-8000-LPBUS
Brand: Cherry Pages: 3
Monzana 105573 Instructions preview
105573
Brand: Monzana Pages: 5
ACME KS-01 User Manual preview
KS-01
Brand: ACME Pages: 52
ACME KS-03 User Manual preview
KS-03
Brand: ACME Pages: 52
Franklin IC-151 User Manual preview
IC-151
Brand: Franklin Pages: 30
Totally Wicked Rival User Manual preview
Rival
Brand: Totally Wicked Pages: 11
Roland EM-2000 Service Notes preview
EM-2000
Brand: Roland Pages: 34
Deck CBL108 User Manual preview
CBL108
Brand: Deck Pages: 3
Wersi Pegasus Wing V2 User Manual preview
Pegasus Wing V2
Brand: Wersi Pages: 36
Shintaro SH-KEYMCE User Manual preview
SH-KEYMCE
Brand: Shintaro Pages: 7
Fatar ST-610 User Manual preview
ST-610
Brand: Fatar Pages: 6
I-Tech NK2d User Manual preview
NK2d
Brand: I-Tech Pages: 10
Mace MACALLY MERGOKEY User Manual preview
MACALLY MERGOKEY
Brand: Mace Pages: 4

Brands by name

Popular brands

Load more brands