manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, 88.208.23.73:8080.

Share
Download
background image

Program mode: HD-1

64

The OASYS keyboard tracking can also be much more 
complex, since it allows you to create different rates of 
change over up to four different parts of the keyboard. 
For instance, you can:

• Make the filter cutoff increase very quickly over the 

middle of the keyboard, and then open more 
slowly–or not at all–in the higher octaves.

• Make the cutoff increase as you play 

lower

 on the 

keyboard.

• Create abrupt changes at certain keys, for split-like 

effects.

How it works: Keys and Ramps

The keyboard tracking works by creating four ramps, 
or slopes, between five keys on the keyboard. The 
bottom and top keys are fixed at the bottom and top of 
the MIDI range, respectively. You can set the other 
three keys–named 

Low Break

, 

Center

, and 

High 

Break

–to be anywhere in between.

The four Ramp values control the rate of change 
between each pair of keys. For instance, if the 

Low-

Center

 Ramp is set to 0, the value will stay the same 

between the 

Low Break

 key and the 

Center

 key. 

You can think of the resulting shape as being like two 
folding doors attached to a hinge in the center. At the 

Center

 key (the main hinge), the keyboard tracking has 

no effect. The two folding doors swing out from this 
center point to create changes in the higher and lower 
ranges of the keyboard.

Intensity to A

[–99…+99]

This controls how much the keyboard tracking will 
affect Filter A ‘s cutoff frequency. The overall effect of 
the Keyboard Track is a combination of this Intensity 
value and the overall Keyboard Track shape.

With 

positive values (+)

, the effect will be in the 

direction specified by keyboard tracking; if the ramp 
goes up, the filter cutoff will 

increase

. 

With 

negative values (–), 

the effect will be in the 

opposite direction; if the ramp goes up, the filter cutoff 
will 

decrease

.

Intensity to B

[–99…+99]

This controls how much the keyboard tracking will 
affect Filter B‘s cutoff frequency.

Key

Low Break

[C–1…G9]

This sets the breakpoint note between the two lower 
ramps - the “hinge” of the lower door.

Center

[C–1…G9]

This sets the center of the keyboard tracking - the main 
“hinge.” At this key, the keyboard tracking has no 
effect on the filter cutoff, or on any AMS destinations.

High Break

[C–1…G9]

This sets the breakpoint note between the two higher 
ramps - the “hinge” of the upper door. 

Entering notes from the keyboard

You can enter note numbers directly by playing them 
on the keyboard. To do so:

1. Select one of the Key parameters.
2. Hold down the ENTER key.
3. While holding ENTER, play a note on the 

keyboard.

Keyboard Track Shape and Intensity

Ramp

Positive ramp values mean that the keyboard tracking 
output increases as you play farther from the 

Center 

Key

; negative ramp values mean that it decreases.

Because of this, the meanings of positive and negative 
ramp settings will change depending on whether the 
ramp is to the left or right of the 

Center Key

.

Bottom-Low and Low-Center

: negative ramps make 

the keyboard tracking’s output go down as you play 
lower on the keyboard, and positive ramps make the 
output go higher.

Center-High and High-Top

: negative ramps make the 

keyboard tracking’s output go down as you play 

higher

 

on the keyboard, and positive ramps make the output 
go up.

The effect on the filter cutoff is a combination of the 
ramp values, as set below, and the Intensity to A and B 
parameters. When Intensity is set to +99, a ramp of 50 
changes the filter frequency by 1 octave for every 
octave of the keyboard, and a ramp of +99 changes the 
frequency by 2 octaves for every octave of the 
keyboard.

Bottom-Low

[–Inf, –99…+99, +Inf]

This sets the slope between the bottom of the MIDI 
note range and the Low Break key. For normal key 
track, use negative values.

Low Break Key

Center Key

High Break Key

Intensity = +99 (Original Shape)

Intensity = –99 (Inverted)

Intensity = +50 (Less Effect)

Intensity = 0 (No Effect)

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

Garmin vivofit 3 Owner'S Manual preview
vivofit 3
Brand: Garmin Pages: 14
Garmin Forerunner 225 Owner'S Manual preview
Forerunner 225
Brand: Garmin Pages: 14
Deltaco Gaming PK95R User Manual preview
PK95R
Brand: Deltaco Gaming Pages: 8
Studiologic VMK-88 plus Manual preview
VMK-88 plus
Brand: Studiologic Pages: 98
BTC 5309URF Quick Install Manual preview
5309URF
Brand: BTC Pages: 1
Microsoft SideWinder X6 Manual preview
SideWinder X6
Brand: Microsoft Pages: 9
M-Audio Oxygen 61 Quick Start Manual preview
Oxygen 61
Brand: M-Audio Pages: 44
Logitech TypeAway Setup preview
TypeAway
Brand: Logitech Pages: 16
Logitech 920-000324 - USB Keyboard For PlayStation 3 Wired Setup Manual preview
920-000324 - USB Keyboard For PlayStation 3 Wired
Brand: Logitech Pages: 2
M-Audio HAMMER88 User Manual preview
HAMMER88
Brand: M-Audio Pages: 14
Loshine KG9015 Quick Manual preview
KG9015
Brand: Loshine Pages: 2
Nokia SU-42 User Manual preview
SU-42
Brand: Nokia Pages: 8
Nokia Power Keyboard SU-42 User Manual preview
Power Keyboard SU-42
Brand: Nokia Pages: 8
Hama uRage Exodus Macro Operating Instructions Manual preview
uRage Exodus Macro
Brand: Hama Pages: 10
Paser MediaDAB 2.0 Installation & Use Manual preview
MediaDAB 2.0
Brand: Paser Pages: 6
Star Trac E-RBi User Manual preview
E-RBi
Brand: Star Trac Pages: 52
Star Trac 8TR Service Manual preview
8TR
Brand: Star Trac Pages: 62
Trust MaxTrack 17088 User Manual preview
MaxTrack 17088
Brand: Trust Pages: 47

Brands by name

Popular brands

Load more brands