manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, 88.208.23.73:8080.

Share
Download
background image

Effect Guide

750

post-IFX2, 3, and 4 signals to set the send levels of 
Timbres 2, 3, and 4, and use the 

Send1

 and 

Send2

 

parameters for the post-IFX5 signal to set the send 
levels of Timbres 5 and 6. For Timbres 7 and 16, the 
settings of 

Send1 (to MFX1)

 and 

Send2 (to MFX2)

 will 

be effective. (At this time, the actual send levels use 
these Send 1 and 2 values multiplied by the Send1 and 
2 settings for Program oscillators 1 and 2.)

“Bus Select DKit” is valid if you’ve selected a drum 
track for a Timbre (Combination) or Track (Sequencer).

Fig. 2–2a

If you select 

DKit

, the 

Bus Select

 settings for each key 

become effective, and each drum instrument sound 
will be routed to the corresponding buses. At this time, 
the actual send levels use these Send 1 and 2 values, 
multiplied by the Send1 and 2 settings for each 
DrumKit key.

If a drum kit’s 

Bus Select

 is set to L/R or Off, the levels 

will be these Send 1 and 2 settings multiplied by the 
send levels you specify in Program P8: Routing page 
for OSC1 

Send1 (to MFX1)

 and 

Send2 (to MFX2)

 

(Program 8–1d), just as in other cases (

Oscillator Mode

 

Single or Double).

If 

Bus Select

 is set to IFX1–12, use 

Send1

 and 

Send2

 

for the post-IFX signal. If 

Bus Select

 is set to 1–8, or 

1/2–7/8, the Send 1 and 2 settings will be ignored.

Fig. 2–2b

Sampling mode

You can apply insert effects, master effects, and total 
effects to an external audio source from the AUDIO 
INPUT 1, 2, 3, 4, or S/P DIF IN jacks, and sample the 
result. You can also apply insert effects, master effects, 
and total effects to samples assigned to a multisample, 
and resample the result.

Use the P0– Audio Input page to make settings for 
external audio sources from the AUDIO INPUT 1, 2, 3, 
4, or S/P DIF IN jacks.

The 

Bus Select

 setting for each jack specifies the bus to 

which the external input source will be sent. You can 
choose from L/R, IFX1–12, 1–8, 1/2–7/8, or Off. If 

Bus 

Select

 is set to L/R or Off, use 

Send1 (to MFX1)

 and 

Send2 (to MFX2)

 to adjust the send levels to the master 

effects. If 

Bus Select

 is set to IFX1–12, use the post-IFX 

Send1

 and 

Send2

 to adjust the send levels to the 

master effects.

If you want to apply the master effects to the samples 
of a multisample and play or resample the result, use 
the P8 - Routing page settings 

Send1 (to MFX1)

 and 

Send2 (to MFX2)

 or the P8 - Insert FX page settings 

post-IFX1–12 

Send1

 and 

Send2

 settings to adjust the 

send levels to the master effects.

Send1 can be controlled by receiving CC#93, and 
Send2 by receiving CC#91. These parameters are 
controlled on the global 

MIDI channel

.

Note:

 You can use the control surface to control Send 1 

and 2. For details, see “8–1f: OSC MFX Send” on 
page 125.

Audio Input, S/P DIF IN

In Program, Combination, Sequencer, and Disk modes, 
external audio sources from the AUDIO INPUT 1, 2, 3, 
4, and S/P DIF IN jacks can be processed by insert 
effects, master effects, and total effects just as they can 
in Sampling mode.

In the P0– Audio Input/Sampling page of each mode, 
the 

Use Global Settings

 parameter makes settings for 

external input from the AUDIO INPUT 1, 2, 3, 4, and 
S/P DIF IN jacks.

Set 

Bus Select

 to specify the bus to which the external 

audio input will be sent. You can select L/R, IFX1–12, 
1–8, 1/2–7/8, or Off. If 

Bus Select

 (Global P0: 0–3a) is 

set to L/R or Off, adjust the send levels to the master 
effects using 

Send1 (to MFX1)

 and 

Send2 (to MFX2)

. If 

Bus Select

 is set to IFX1–12, use the post-IFX 

Send1

 

and 

Send2

. If this is set to 1–8 or 1/2–7/8, the signal 

will not be sent to the master effects.

In Disk mode, effects will use the settings of the 
mode in which you previously were.

Note:

 You can use the control surface to control Send 1 

and 2. For details, see “8–1f: OSC MFX Send” on 
page 125.

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

Zagg Keyboard Case Instructions Manual preview
Keyboard Case
Brand: Zagg Pages: 20
Niceboy ORYX K600 Manual preview
ORYX K600
Brand: Niceboy Pages: 30
Ectaco Partner EAl400T User Manual preview
Partner EAl400T
Brand: Ectaco Pages: 22
Partner Tech International KB-78 User'S Reference Manual preview
KB-78
Brand: Partner Tech International Pages: 15
BASE12 HW086 Product Manual preview
HW086
Brand: BASE12 Pages: 14
I-Tech RackView RV1-KMA Features And Benefits preview
RackView RV1-KMA
Brand: I-Tech Pages: 2
BOW HB022S User Manual preview
HB022S
Brand: BOW Pages: 6
D-MAX DCK-500B User Manual preview
DCK-500B
Brand: D-MAX Pages: 47
Rii Mini i6 User Manual preview
Mini i6
Brand: Rii Pages: 11
Franklin Bookman QBD-2067 User Manual preview
Bookman QBD-2067
Brand: Franklin Pages: 18
Hama COVO Operating Instructions Manual preview
COVO
Brand: Hama Pages: 16
Jensen Voyager CSW5007Q Owner'S Manual preview
Voyager CSW5007Q
Brand: Jensen Pages: 14
Bakker Elkhuizen UltraBoard 950 User Manual preview
UltraBoard 950
Brand: Bakker Elkhuizen Pages: 9
HYPE bluetooth keyboard User Manual preview
bluetooth keyboard
Brand: HYPE Pages: 10
HIKVISION DS-TCP345-K User Manual preview
DS-TCP345-K
Brand: HIKVISION Pages: 91
Cherry KC 4020 Backlight Operating Manual preview
KC 4020 Backlight
Brand: Cherry Pages: 20
Sentey Elite Gamer GHO5T User Manual preview
Elite Gamer GHO5T
Brand: Sentey Pages: 12
Cherry G86-6x4xx Operating Manual preview
G86-6x4xx
Brand: Cherry Pages: 8

Brands by name

Popular brands

Load more brands