manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, 88.208.23.73:8080.

Share
Download
background image

Appendices

972

Notes for the table

*1

EXT(+–): JS X, Ribbon (CC#16), KnobMod.5 

(CC#17), KnobMod.6 (CC#19), KnobMod.7 (CC#20), 
KnobMod.8 (CC#21)

*2

When Tempo is selected as an AMS source, the 

base value is 

 =120.

For example if the Pitch AMS is set to Tempo, and 
Intensity is set to 12.00, doubling the tempo value (

 

=120 

→

 240) will raise the pitch one octave, and 

halving the tempo (

 =120 

→

 60) will lower the pitch 

one octave. The stated modulation results are for 
tempo values between 60bpm and 240bpm. As the 
tempo decreases from 60 to 0bpm, AMS modulation 
will have increasingly negative effects; as it increases 
from 240 to 250bpm, modulation will have 
increasingly positive effects.

*3

EXT(+): Velocity, Exponential Velocity, Poly 

After Touch, After Touch, JS+Y (CC#01), JS–Y (CC#02), 
JS+Y & AT/2, JS–Y & AT/2, Foot Pedal (CC#04), Value 
Slider (CC#18), KnobMod5. [+], KnobMod6. [+], 
KnobMod7. [+], KnobMod8. [+], Damper (CC#64), 
Porta.SW (CC#65), Sostenuto (CC#66), Soft (CC#67), 
SW1 Mod. (CC#80), SW2 Mod. (CC#81), Controller 
(CC#83), VJS +X Mod. (CC#85), VJS –X Mod. (CC#86), 
VJS +Y Mod. (CC#87), VJS –Y Mod. (CC#88).

*4

A dedicated parameter is also provided for 

controlling Pitch from the Ribbon.

*5

It is possible to control LFO “Frequency” by 

using Tempo 

AMS

 and “Intensity.” However if you 

use the Frequency MIDI/Tempo Sync function 
(Program 5–1c), the LFO frequency can be 
synchronized to the tempo and note value.

The effects of AMS on various parameters, 
and example applications

Using as HD-1 program as an example, we’ll describe 
some examples of using alternate modulation.

Pitch (Program 2–2a)

Pitch can be controlled by the wave sequence’s AMS 
Out, Common LFO, filter/amp EG, controllers, or 
tempo etc.

• If you select Filter EG or Amp EG as the 

AMS

 and 

set “Intensity” to +12.00, the pitch will change up to 
±1 octave in synchronization with the EG.

• If you select Tempo as the 

AMS

 and set “Intensity” 

to +12.00, doubling the tempo (based on 

 

=120) will 

raise the pitch one octave, and halving the tempo 
will lower the pitch one octave.

Pitch EG Intensity (Program 2–2b)

Pitch EG intensity can be controlled by the wave 
sequence’s AMS Out, Common LFO, keyboard 
tracking, controllers, or tempo.

• If you select JS +Y:CC#01 as the 

AMS

 and set 

“Intensity” to +12.00, moving the joystick in the +Y 
direction will gradually increase the effect of the 

Pitch EG to a maximum of ±1 octave. If “Intensity” 
has a negative value, the effect of the Pitch EG will 
be inverted.

Pitch LFO 1/2 Intensity (Program 2–2c)

Pitch modulation intensity of the LFO1/2 can be 
controlled by the wave sequence’s AMS Out, Common 
LFO, an EG, keyboard tracking, controllers, or tempo 
etc.

• If you select EG as the 

AMS

, the pitch change 

width of LFO modulation etc. can be controlled in 
synchronization with the level changes of the EG. 
With positive (+) settings of “Intensity,” the vibrato 
effect will gradually deepen as the EG level rises, or 
gradually lessen as the EG level decreases. With 
negative (–) settings of “Intensity,” the LFO phase 
will be inverted.

• If you select a controller such as SW1 or 2 as the 

AMS

, you can press the SW1 or SW2 switch when 

desired to turn on the vibrato effect.

Filter (Cutoff) Frequency (Program 3–1b)

The cutoff frequency of filter A/B can be controlled by 
the wave sequence’s AMS Out, pitch/amp EG, 
Common keyboard tracking, controllers, or tempo. Set 

AMS

 and “Intensity” for Filter A or B.

• If you select JS X or Ribbon:CC#16 as the 

AMS

 and 

set “Intensity” to a positive (+) value, moving the 
joystick or ribbon controller toward the right will 
raise the cutoff frequency, and moving it toward 
the left will lower the cutoff frequency. Negative (–) 
settings will have the opposite effect.

• If you select the same controller as an 

AMS

 and set 

separate intensities for Filter A (Low Pass Filter) 
“Intensity” and Filter B (High Pass Filter) 
“Intensity,” you can operate a single controller to 
simultaneously control the cutoff frequencies of 
both filters.

Resonance (Program 3–1b)

You can use the wave sequence’s AMS Out, EG, LFO, 
keyboard tracking, controllers, or tempo etc. to control 
the resonance level.

• If you select Filter Key Track or Amp Key Track as 

the 

AMS

, you can use the filter or amp keyboard 

tracking settings to control the resonance level. For 
example if the amp keyboard tracking parameters 
“Ramp Bottom-Low” and “Ramp High-Top” are 
set to positive (+) values, Amp Key Track is 
selected as the 

AMS

, and “Intensity” it set to a 

positive (+) value, playing toward either end of the 
keyboard will cause amp keyboard tracking to 
increase the volume, and 

AMS

 to raise the 

resonance level.

• You can select a controller as the 

AMS

, and apply 

resonance when desired by operating the 
controller.

Wave Sequence 
Position

(+63)

0…+63

–63…0…+63

–

–

–

–

–63…0…+63

0…+63

Wave Sequence 
Step Duration

(400%)

1x…4x

1/100x…1x…4x

–

1/100x…1x…4x

1x…4x

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

Qoltec 7991 Installation & User Manual preview
7991
Brand: Qoltec Pages: 5
M-Audio Oxygen 25 Quick Start Manual preview
Oxygen 25
Brand: M-Audio Pages: 44
Real-El M47 RGB User Manual preview
M47 RGB
Brand: Real-El Pages: 5
Dr.Dabber aura User Manual preview
aura
Brand: Dr.Dabber Pages: 13
XUMA CKF-112G Manual preview
CKF-112G
Brand: XUMA Pages: 8
Thermaltake Ttesports Challenger Quick Start Quide preview
Ttesports Challenger
Brand: Thermaltake Pages: 5
Thermaltake Tt ESPORTS MEKA PRO Quick Installation Manual preview
Tt ESPORTS MEKA PRO
Brand: Thermaltake Pages: 10
L3 Systems WristPC Manual preview
WristPC
Brand: L3 Systems Pages: 8
iHome IH-IP2103 Quick Start Manual preview
IH-IP2103
Brand: iHome Pages: 2
Totally Wicked Corsa User Manual preview
Corsa
Brand: Totally Wicked Pages: 11
HYPE bluetooth keyboard User Manual preview
bluetooth keyboard
Brand: HYPE Pages: 10
Canyon Smart Coach SB-75 Quick Manual preview
Smart Coach SB-75
Brand: Canyon Pages: 144
Penclic Numpad NB2 Quick Manual preview
Numpad NB2
Brand: Penclic Pages: 32
Cherry J84-4300LUAUS-2 Technical Data preview
J84-4300LUAUS-2
Brand: Cherry Pages: 2
Car Solutions QVL-MB08Q-V7.1 User Manual preview
QVL-MB08Q-V7.1
Brand: Car Solutions Pages: 23
Ford 250-8413 Installation Manual preview
250-8413
Brand: Ford Pages: 18
Sven KB-G8600 User Manual preview
KB-G8600
Brand: Sven Pages: 4
Acer SD-9086 Product Manual preview
SD-9086
Brand: Acer Pages: 3

Brands by name

Popular brands

Load more brands