manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, 88.208.23.73:8080.

Share
Download
background image

Sequencer mode

418

Multi REC

[Off, On]

On (checked):

 Multi-track recording setup is enabled. 

Select this if you want to record two or more tracks 
simultaneously.

Use MIDI multi-track recording if you want to 
simultaneously record multiple MIDI tracks of 
different channels, such as when recording the output 
of the KARMA or RPPR functions, or when recording 
from an external multi-track sequencer.

You can also record up to four audio tracks 
simultaneously.

If the Multi REC box is checked, the 

Play/Rec/Mute

 

status of the track you select in 

Track Select

 will be set 

to REC; press the 

Play/Rec/Mute

 button of the track(s) 

you want to record so that they indicate REC. (The 
button indication will change in the order of Play 

→

 

Rec 

→

 Mute.)

Regardless of the 

Track Select

 (0–1a) setting, data will 

be recorded on the MIDI tracks and audio tracks that 
are set to REC. MIDI data will be recorded on the 
tracks of the matching MIDI channel.

For details on how to record from the KARMA 
function or an external multi-track sequencer onto 
multiple tracks of different MIDI channels, see the 
Operation Guide: “KARMA function settings in 
Sequencer mode” on page 210, and “Realtime multi-
track recording using settings copied from a 
combination” on page 212.

Note:

 If you’re recording data from an external multi-

track sequencer, set 

MIDI Clock

 (Global 1–1a) to 

External MIDI so that the OASYS will synchronize to 
your external sequencer. Tempo changes cannot be 
recorded.

Off (unchecked):

 Single track recording setup will be 

selected. Recording will occur on the track selected by 

Track Select

.

This cannot be selected if 

Recording Setup

 is set to 

Loop All Tracks.

0–1b: Track Program Select

Selected Track Info

This page displays information about the track you’re 
editing. If you’ve selected a MIDI track, this shows the 
bank type, T: MIDI track number/program 
bank/number/name, Ch: MIDI channel number, 
RPPR (Assign): the key number that starts the RPPR 
assigned to the track, and KBD: the MIDI Track 
number/program bank/number/name that sounds 
when you play the keyboard.

RPPR (Assign) will not show all of the assignments if 
there are many RPPR assignments. The P6– Pattern 
Edit page lets you see all of the assignments.

If you’ve selected an audio track, this shows AT: audio 
track number/region number of the first audio 
event/name, [STEREO]: Stereo Pair on/off status, and 
KBD: The MIDI Track number/program 
bank/number/name that sounds when you play the 
keyboard.

Gray color and [Inactive] warning in Track Info

Normally, the numbers for un-selected Tracks use a 
dark blue background, and a light blue background 
hilights the selected Track. 

If the background is gray, instead, this means that 
the maximum amount of EX

i

 Fixed Resources has 

been exceeded, and the EX

i

 Program assigned to the 

Track will be muted and inactive. In this case, the 
Selected Track Info will also show the warning 
[Inactive] after the Program’s name.

For more information on this subject, including 
ways to get more out of the system, see “CX-3 & 
STR-1: Limitations on EXi fixed resources” on 
page 326.

Track 01 (Track Number)

This shows the MIDI track number. The parameters 
below this let you make settings for the track.

Track Category

[00…17]

Here you can select a category and sub-category to 
choose the program used by the MIDI track. All 
programs are organized into up to 18 categories and 8 
sub-categories. Choose the desired category and sub-
category, and then choose from the programs within 
that category.

Press this popup button to access the Category 
Program Select menu, and choose a program. 

For details, see “Category/Program Select” on 
page 324.

Program Select [INT–A…F, USER–A…G: 000…127

G, g(1)…g(9), g(d): 001…128]

Selects the program that will be used by each MIDI 
track.

The lower line displays part of the program name.

The program you select here will be used when the 
song is played or recorded from the beginning. If the 
program is changed while recording, the program 
change will be recorded as musical data, and the 
program will change during playback. You can also 
change the program manually during playback. 
However if musical data (program change data) is 
already recorded, the program will change at that 
point.

If the 

Status

 (2–1a) is either INT or BTH, programs 

can be selected by receiving MIDI program change 
messages. Also, when the song is changed or when 
the song returns to the beginning, tracks whose 

Status

 is EXT, EX2 or BTH will transmit the bank 

and program numbers via MIDI. Tracks whose 

Status

 is EX2 will show Bank as “–” and will 

transmit the bank number that was selected in the 
“Bank Select” (2–1b) parameter.

Various ways to change the program for a track

• Choose “Program Select,” use numeric keys 0–9 to 

input a program number, and press the ENTER 
switch.

• Choose “Program Select,” and turn the VALUE dial 

or use the 

/

 switches.

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

VARMILO MACA 100 G-2 Manual preview
MACA 100 G-2
Brand: VARMILO Pages: 36
A4Tech GX-100 User Manual preview
GX-100
Brand: A4Tech Pages: 4
Synovatron cvgt MM User Manual preview
cvgt MM
Brand: Synovatron Pages: 18
KROM Kael User Manual preview
Kael
Brand: KROM Pages: 16
Riitek RT-MWK13 Installation & User Manual preview
RT-MWK13
Brand: Riitek Pages: 11
GEM GK350 Owner'S Manual preview
GK350
Brand: GEM Pages: 38
Motorola BLUETOOTH KEYBOARD Manual preview
BLUETOOTH KEYBOARD
Brand: Motorola Pages: 80
Motorola iDEN Keyboard Mini 32K User Manual preview
iDEN Keyboard Mini 32K
Brand: Motorola Pages: 22
Motorola KZ450 Wireless Keyboard w Device Stand Getting Started Manual preview
KZ450 Wireless Keyboard w Device Stand
Brand: Motorola Pages: 76
Motorola AlphaMate II Operator'S Manual preview
AlphaMate II
Brand: Motorola Pages: 27
Motorola KZ500 Wireless Keyboard with Trackpad Manual preview
KZ500 Wireless Keyboard with Trackpad
Brand: Motorola Pages: 76
Motorola HMSC7075 Quick Start Manual preview
HMSC7075
Brand: Motorola Pages: 10
TOSTRONG CSBB-03IP Instructions preview
CSBB-03IP
Brand: TOSTRONG Pages: 4
Trust DS-1700R User Manual preview
DS-1700R
Brand: Trust Pages: 45
Audiovox ACA200 Installation Manual preview
ACA200
Brand: Audiovox Pages: 18
Hamichord MC-3 User Manual preview
MC-3
Brand: Hamichord Pages: 17
BAT glo User Manual preview
glo
Brand: BAT Pages: 20
Strong by Science G-Flight User Manual preview
G-Flight
Brand: Strong by Science Pages: 12

Brands by name

Popular brands

Load more brands