manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, 88.208.23.73:8080.

Share
Download
background image

Sequencer mode

552

On:

 If you edit the “Start” or “End” address, the 

“End” or “Start” address will automatically be 
adjusted to preserve the existing length between 
“Start” and “End.”

Allow Tempo [Off, On]

This specifies whether the Region’s Tempo (see 
“Tempo [40.00…240.00],” below) will be used when 
executing the menu commands “Adjust Region to 
Song’s Tempo (Time Stretch)” or “Adjust Song’s 
Tempo to Region.”

Normally you will leave this turned on, and turn it 
off only when using “one-shot” samples such as 
rhythm instruments whose length you don’t want 
to change even if the tempo is changed.

This is turned on when you record or import.

Tempo [40.00…240.00]

This specifies the tempo of the region.

This tempo is used when executing the “Adjust 
Region to Song’s Tempo (Time Stretch)” or “Adjust 
Song’s Tempo to Region” page menu commands. 

For more information, please see “Adjust Region to 
Song’s Tempo (Time Stretch)” on page 553, and 
“Adjust Song’s Tempo to Region” on page 553.

The tempo at the beginning of recording is set at the 
time of recording. With imported audio files, the 
tempo is set to 120.00.

Song [000…199]
Audio Track [01…16]

These specify the song number and audio track that 
are displayed when viewing regions for each audio 
track if you’ve checked 

Song

 for “Select Region” 

when using “Edit Region” or “Audio Event Edit.” 
For details, see step 2.

Play/Stop

When you press the Play button, the area from 
“Start” to “End” will play back, allowing you to 
audition the trimmed region. During playback, the 
button is displayed as Stop; playback will stop if 
you press it. 

8. If you want to keep the changes you made in the 

Trim dialog box, press the Done button.

If you don’t want to save your changes, press the 
Cancel button. If you press the Cancel button, the 
region will revert to the state prior to entering the 
Trim dialog box.

9. When you’re 

fi

nished with Region Edit, press the 

Done button.

Volume Ramp

This command modifies the data values (volume) of 
the specified area. You can gradually increase (Fade In) 
or decrease (Fade Out) the volume between the start 
and end points.

1. Use Track Select to select the audio track that you 

want to edit, and use From Measure and To End of 
Measure to specify the area that you want to edit.

2. Choose “Volume Ramp” to open the dialog box.

3. Use From Measure, “To Measure,” and Beat.Tick 

to specify the area on which you will execute the 
command.

Specify the desired measures in 

From Measure

 and 

“To Measure,” and specify the beat and clock in 

Beat.Tick

. By default, 

From Measure

 and “To 

Measure” are set to the range of measures you 
specified in 

From Measure

 and 

To End of Measure

 

of the Track Edit page.

4. Use the radio buttons to select the type of volume 

ramp.
Fade In:

 The volume will be zero at the beginning of 

the range, and will gradually increase toward the 
original volume at the end of the range.

Fade Out:

 The volume will gradually decrease from 

the beginning of the range, reaching zero at the end 
of the range.

5. Use “Curve” to select how the volume will change.

Linear:

 The volume will change linearly. Choose the 

Linear setting for a conventional fade-in or fade-out.

Power:

 The volume will change non-linearly. In 

some cases, such as when you use the “Mix” menu 
command to mix (cross-fade) a faded-in waveform 
with a faded-out waveform, using the Linear setting 
may produce the impression that the volume is 
lower during the transition. If so, use the Power 
setting.

6. Press the OK button to execute the Volume Ramp, 

or press the Cancel button if you decide to cancel.

Note:

 When you execute this command, a new region 

and WAVE file will be created, and the file will be 
named automatically. The audio event will also be 
updated. Automation events will not be affected.

Fade In

Fade Out

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

Yamaha Clavinova CLP-250 Eigentümer-Handbuch preview
Clavinova CLP-250
Brand: Yamaha Pages: 17
Yamaha Arius YDP-C71 Operation Manual preview
Arius YDP-C71
Brand: Yamaha Pages: 13
Yamaha Arius YDP-C71 Quick Operation Manual preview
Arius YDP-C71
Brand: Yamaha Pages: 2
Radio Shack 42-4058 Owner'S Manual preview
42-4058
Brand: Radio Shack Pages: 44
Valeo Park Vision VAL632210 Instruction Manual preview
Park Vision VAL632210
Brand: Valeo Pages: 25
swissonic ControlKey 49 User Manual preview
ControlKey 49
Brand: swissonic Pages: 32
BH FITNESS G6520FB Manual preview
G6520FB
Brand: BH FITNESS Pages: 47
Vaporesso XROS Nano FGSB7 User Manual preview
XROS Nano FGSB7
Brand: Vaporesso Pages: 57
Razer HUNTSMAN V2 TKL Master Manual preview
HUNTSMAN V2 TKL
Brand: Razer Pages: 64
Canyon CNS-HKB6 Quick Start Manual preview
CNS-HKB6
Brand: Canyon Pages: 10
Storm 1200 Application/Engineering Manual preview
1200
Brand: Storm Pages: 18
Globlink GKM-888T User Manual preview
GKM-888T
Brand: Globlink Pages: 11
CCTV Discover JK900 User Instruction preview
JK900
Brand: CCTV Discover Pages: 10
Franklin BOOKMAN CDR-2041 User Manual preview
BOOKMAN CDR-2041
Brand: Franklin Pages: 20
Hama SL 570 Operating Instruction preview
SL 570
Brand: Hama Pages: 6
Logitec MK330 Quick Start Manual preview
MK330
Brand: Logitec Pages: 2
iHome Type Pro IH-IP2104 Quick Start Manual preview
Type Pro IH-IP2104
Brand: iHome Pages: 2
Roland cakewalk A-300PRO Owner'S Manual preview
cakewalk A-300PRO
Brand: Roland Pages: 92

Brands by name

Popular brands

Load more brands