manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, 88.208.23.73:8080.

Share
Download
background image

Sampling: Page Menu Commands    MS Mono To Stereo/MS Stereo To Mono (Change Multisample Type)

619

The multisample will be converted into a program 
whose 

Oscillator Mode

 (Program 1–1b) is Single.

If “Use Destination Program Parameters” is 
checked:

Executing this command will replace the 
multisample of the convert destination program 
with the multisample selected here, and will not 
initialize the remaining program parameters. Use 
this setting if you wish to use the parameter settings 
of an existing preset program, etc.

If you check “Use Destination Program 
Parameters,” be aware of the following points.

The 

Oscillator Mode

 of the convert-destination 

program must be Single. If you attempt to execute 
this command when these conditions are not 
satisfied, a message will indicate “Oscillator Mode 
conflicts.” You will need to change the 

Oscillator 

Mode

 setting of the convert destination program.

5. In To “Program,” select the convert destination 

program.

When the edit cell is selected, you can use the 
numeric keys 0–9, the VALUE dial, the VALUE 
slider, and 

/

 switches to make a selection. 

When you press the popup button, the Program 
Select menu will appear. Here you can select a 
program by bank.

It is recommended that you use USER-B as the 
program bank for Sampling mode.

6. To execute the Convert Multisample To Program 

command, press the OK button. To cancel, press 
the Cancel button.

MS Mono To Stereo/MS Stereo To Mono 
(Change Multisample Type)

This command converts a mono multisample to stereo, 
or a stereo multisample to mono. If the selected 
multisample is mono, the dialog box will allow you to 
execute “MS Mono To Stereo.” If the selected 
multisample is stereo, the dialog box will allow you to 
execute “MS Stereo To Mono.”

1. Use “Multisample Select (MS)” (0–1a) to select the 

multisample that you want to change to stereo or 
mono.

2. Choose either “MS Mono To Stereo” or “MS 

Stereo To Mono” to open the dialog box.

3. To execute the Change Multisample Type 

command, press the OK button. To cancel, press 
the Cancel button.

When you execute this command, the multisample 
type and sample assignment will change as follows.

MS Mono To Stereo

• The selected multisample will be converted to 

stereo. The last two characters of the multisample 
name will be overwritten as -L.

• An identical multisample will be newly created, but 

with the last two characters of the multisample 
name overwritten as -R.

• Mono samples assigned to the original multisample 

will be assigned to both -L and -R multisamples.

• If samples assigned to the original multisample are 

part of a stereo pair of samples, the -L and -R 
samples will be assigned to the -L and -R 
multisamples.

: MS Stereo To Mono

• The selected multisample will be converted to 

mono. The -L or -R at the end of the multisample 
name will be deleted.

• Multisamples that are stereo pairs of the selected 

multisample will be deleted.

Move MS (Move Multisample)

This command lets you move the currently selected 
multisample to the specified number (i.e., to change 
the multisample number), or to rearrange the 
multisample numbers so that they start from 000 after 
multisamples have become discontinuous as a result of 
creating or editing. (See diagram below)

When you reassign the multisample numbers, the 
multisample numbers within the programs that use 
these multisamples will also be automatically 
reassigned (according to the setting of step 4). (This 
means that you do not need to reselect the 
multisamples in Program mode following this 
operation.)

1. Use “Multisample Select (MS)” (0–1a) to select the 

multisample that you wish to move.

2. Select “Move MS” to open the dialog box.

3. In To “Multisample,” specify the move destination 

multisample number.

 When moving a stereo multisample, you will 

need to move each part separately.

If you wish to rearrange all multisamples 
consecutively, check “Optimize Empty Multisample 
No.”

4. If “Adjust Multisample Assign in Program” is 

checked and if the multisamples being moved are 

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

Alpine KCE-G7QI Installation preview
KCE-G7QI
Brand: Alpine Pages: 2
Niko 10-901 Manual preview
10-901
Brand: Niko Pages: 24
Kurzweil Forte SE Musician'S Manual preview
Forte SE
Brand: Kurzweil Pages: 374
Zagg slim book go Instructions Manual preview
slim book go
Brand: Zagg Pages: 26
Ectaco Partner ECS430T User Manual preview
Partner ECS430T
Brand: Ectaco Pages: 24
Logitech G510s Features Manual preview
G510s
Brand: Logitech Pages: 2
Audiovox CMT9300 Installation Manual preview
CMT9300
Brand: Audiovox Pages: 7
Bosch TWK 7901 Instruction Manual preview
TWK 7901
Brand: Bosch Pages: 42
Philips SPK3700BC Specifications preview
SPK3700BC
Brand: Philips Pages: 2
Philips SPK2700BC/27 Specifications preview
SPK2700BC/27
Brand: Philips Pages: 2
ParaBody 810102 Assembly Instruction Sheet preview
810102
Brand: ParaBody Pages: 4
ismoka iKit User Manual preview
iKit
Brand: ismoka Pages: 2
Thermaltake Tt eSPORTS Challenger Elite RGB Combo Software User'S Manual preview
Tt eSPORTS Challenger Elite RGB Combo
Brand: Thermaltake Pages: 10
Cherry G84-4400 Technical Data preview
G84-4400
Brand: Cherry Pages: 2
Continental Refrigerator KIBES Brochure preview
KIBES
Brand: Continental Refrigerator Pages: 7
X-Driven DRS1100 Installation And Operation Manual preview
DRS1100
Brand: X-Driven Pages: 15
Cherry Multiboard G8 series User Manual preview
Multiboard G8 series
Brand: Cherry Pages: 17
Cherry KC 1000 Operating Manual preview
KC 1000
Brand: Cherry Pages: 15

Brands by name

Popular brands

Load more brands