42
Velocity Control
[–99…+99]
Specifies the depth and direction of the effect that
velocity will have on the level of the amp EG.
Amp1 EG changes (level) (AMS=Velocity, Intvalue)
Note-on
Note-off
Note-on
Note-off
Note-on
Note-off
When keyboard is
played strongly with
each Level set to “-”
When keyboard is
played softly with a
Sustain of 0, and Attack
and Break set to “+”
(the settings of 4-3a:
Level)
When keyboard is
played strongly with
each Level set to “+”
4–3d: Time Modulation
AMS1 (Alternate Modulation Source 1)
[Off…MIDI:CC#83]
Selects a modulation source 1 (
☞
p.48 of this manual)
that will control the Amp EG times.
Intensity (EG Time AMS1 Intensity)
[–99…+99]
Specifies the depth and direction of the effect that
“AMS1” will have on the Amp EG times.
AMS2 (Alternate Modulation Source 2)
[Off…MIDI:CC#83]
Selects a modulation source 2 (
☞
p.48 of this manual)
that will control the Amp EG times.
At (Attack Time AMS2 Intensity)
[–99…+99]
Dc (Decay Time AMS2 Intensity)
[–99…+99]
Sl (Slope Time AMS2 Intensity)
[–99…+99]
Rl (Release Time AMS2 Intensity)
[–99…+99]
Specifies the depth and direction of the effect that
“AMS2” will have on each EG time.
Amp EG changes (time) (AMS=Velocity, Intvalue)
Note-on
Note-off
Note-on
Note-off
Note-on
Note-off
When keyboard is
played softly with At,
Dc, Sl, and Rl set to “+”
The settings of 4-3d:
AMS2
When keyboard is
played strongly with
At, Dc, Sl, and Rl
set to “+”
When keyboard is
played strongly with
At, Dc, Sl, and Rl
set to “-”
4–4: Output Level / Pan
4–4a
4–4b
4–4a: Output Level
Output Level
[0…127]
Specifies the output level following the amp.
4-4b: Pan
Pan
[L000…C064…R127]
Set the pan (stereo location) of oscillator 1.
L001 is far left, C064 is center, and R127 is far right.
AMS (Alternate Modulation Source)
[Off…MIDI:CC#83]
Selects the modulation source (
☞
p.36 of this manual)
that will move the panning of amp 1 relative to the
Pan setting.
Intensity (Panpot AMS Intensity)
[–99…+99]
Specifies the depth and direction of the effect of
“AMS” on the panning.