45
Program P6: Edit-Common EG
This section provides four general purpose EGs
(envelope generators). The four EGs can be used as
modulation sources for the parameters of other
sections to create time-variant change in the sound.
Note-off
Attack level
Start
level
Sustain level
Note-on
Attack
time
Decay
time
Slope
time
Release
time
Time
Break
level
0
-99
+99
6–1: EG 1
6–1a
6–1d
6–1c
6–1b
6–1a: Level (EG Level)
Start (Start Level)
[–99…+99]
Specifies the value at the time of note-on.
Attack (Attack Level)
[–99…+99]
Specifies the value that will be reached after the
Attack Time has elapsed.
Break (Break Level)
[–99…+99]
Specifies the value that will be reached after the
Decay Time has elapsed.
Sustain (Sustain Level)
[–99…+99]
Specifies the value that will be reached after the Slope
Time has elapsed.
Release (Release Level)
[–99…+99]
Specifies the value that will be reached after the
Release Time has elapsed.
6–1b: Time (EG Time)
Attack (Attack Time)
[0…99]
Specifies the time from note-on (when a note is
played) until the value reaches the attack level. With a
value of 0, the value will change instantly. With a
value of 99, the value will change slowly.
Decay (Decay Time)
[0…99]
Specifies the time from when the attack time ends
until the Break Level is reached.
Slope (Slope Time)
[0…99]
Specifies the time from when the decay time ends
until the Sustain Level is reached.
Release (Slope Time)
[0…99]
Specifies the time from note-off (when a note is
released) until the Release Level is reached.
6–1c: Level Modulation
AMS (Alternate Modulation Source)
[Off…MIDI:CC#83]
Selects a modulation source (
☞
p.48 of this manual)
that will control the level of EG1.
Intensity (EG Level AMS Intensity)
[–99…+99]
Specifies the depth and direction of the effect that
“AMS” will have on the EG levels.
Velocity Control
[–99…+99]
Specifies the depth and direction of the effect that
velocity will have on the EG levels.
EG changes (level) (AMS=Velocity, Intvalue)
Note-on
Note-off
Note-on
Note-off
Note-on
Note-off
When keyboard is
played strongly with
St, At and Br set to “-”
When keyboard is
played softly with St,
At, and Br set to “+”
(the settings of 6-1a:
Level)
When keyboard is
played strongly with
St, At and Br set to “+”
6–1d: Time Modulation
AMS1 (Alternate Modulation Source 1)
[Off…MIDI:CC#83]
Selects a modulation source 1 (
☞
p.48 of this manual)
that will control the EG1 times.
Intensity (EG Time AMS1 Intensity)
[–99…+99]
Specifies the depth and direction of the effect that
“AMS1” will have on the EG times.
