iPolysix manual
12
Creating a synth sequence
Here’s*how*to*create*a*synth*sequence*for*the*selected*
pattern.
1.
In the navigation bar, tap “SYNTH.”
2.
In the navigation bar, tap the sub-bar switch; in the
sub-bar that appears, choose “SEQ 1.”
3.
Turn on some of the step switches and raise the GATE
value to 25% or higher.
Notes*where*the*GATE*value*is*set*to*25%*or*higher*
will*sound.
4.
You can also record in real time using the keyboard or
Kaoss pads. Touch the controller switch on the lower
left side of the screen to select either the keyboard or
the Kaoss pads. In the navigation bar, tap “REC” and
then “PLAY.” When you’ve finished recording, tap
“REC.”
*
)
For*a*basic*explanation*of*using*the*sequencer,*refer*
to*
*
)
For*details*on*using*the*sequencer,*refer*to*
*
)
For* details* on* using* the* keyboard,* refer* to*
*
)
For*details*on*using*the*Kaoss*pads,*refer*to*
Using the mixer to adjust the volume
Here’s*how*you*can*use*the*mixer*to*adjust*the*volume*of*
each*channel*while*you’re*creating*a*pattern.
1.
In the navigation bar, tap “MIXER.”
2.
Adjust the volume and pan of each channel, and the
master effects.
Knob*and*fader*movements*can*also*be*recorded*in*the*
pattern.
*
)
For*details*on*using*the*mixer,*refer*to*
Go*ahead*and*create*several*patterns*as*described*in*the*
sections*“Selecting*a*pattern”*through*“Using*the*mixer*to*
adjust*the*volume.”
When*you’ve*finished*creating*several*patterns,*you*can*
arrange*them*in*a*desired*order*to*create*a*song.
