Korg Kaptivator KTV1 Owner'S Manual Download

Page: 56 / 59

(3) 1 MOTION SEQUENCE DATA DUMP REQUEST R

+----------------+------------------------------------------------+

| Byte [Hex] | Description |

+----------------+------------------------------------------------+

| F0,42,3n,77 | Exclusive Header KTV1 |

| 0111 1000 (78) | 1 Motion Sequence Data Dump Request 78h |

| 0mmm mmmm (mm) | Dump Motion Number (mm = 00h~63h) |

| 1111 0111 (F7) | EOX |

+----------------+------------------------------------------------+

When this message is received at the MIDI dump page, the 1 MOTION

SEQUENCE DATA DUMP(Function:79h) message will be transmitted.

The DATA PROCESS(LOAD) ERROR(Function:24h) message will be transmitted

in other cases.

(4) 10 MOTION SEQUENCE DATA DUMP REQUEST R

+----------------+------------------------------------------------+

| Byte [Hex] | Description |

+----------------+------------------------------------------------+

| F0,42,3n,77 | Exclusive Header KTV1 |

| 0111 1010 (7A) | 10 Motion Sequence Data Dump Request 7Ah |

| 0000 pppp (0p) | Dump Motion Page Number (0p = 00h~09h) |

| 1111 0111 (F7) | EOX |

+----------------+------------------------------------------------+

When this message is received at the MIDI dump page, the 10 MOTION

SEQUENCE DATA DUMP(Function:7Bh) message will be transmitted.

The DATA PROCESS(LOAD) ERROR(Function:24h) message will be transmitted

in other cases.

(5) GLOBAL DATA DUMP R/T

+----------------+------------------------------------------------+

| Byte [Hex] | Description |

+----------------+------------------------------------------------+

| F0,42,3n,77 | Exclusive Header KTV1 |

| 0101 0001 (51) | Global Data Dump 51h |

| 0ddd dddd (dd) | Data [NOTE1][TABLE1]|

| : | : |

| 1111 0111 (F7) | EOX |

+----------------+------------------------------------------------+

When this message is received at the MIDI dump page, the DATA PROCESS

(LOAD) COMPLETED(Function:23h) message or the DATA PROCESS(LOAD) ERROR

(Function:24h) message will be transmitted.

The DATA PROCESS(LOAD) ERROR(Function:24h) message will be transmitted

in other cases.

(6) ALL STYLE DATA DUMP R/T

+----------------+------------------------------------------------+

| Byte [Hex] | Description |

+----------------+------------------------------------------------+

| F0,42,3n,77 | Exclusive Header KTV1 |

| 0110 0101 (65) | All Style Data Dump 65h |

| 0ddd dddd (dd) | Data [NOTE2][TABLE2]|

| : | : |

| 1111 0111 (F7) | EOX |

+----------------+------------------------------------------------+

When this message is received at the MIDI dump page, the DATA PROCESS

(LOAD) COMPLETED(Function:23h) message or the DATA PROCESS(LOAD) ERROR

(Function:24h) message will be transmitted.

The DATA PROCESS(LOAD) ERROR(Function:24h) message will be transmitted

in other cases.

(7) 1 MOTION SEQUENCE DATA DUMP R/T

+----------------+------------------------------------------------+

| Byte [Hex] | Description |

+----------------+------------------------------------------------+

| F0,42,3n,77 | Exclusive Header KTV1 |

| 0111 1001 (79) | 1 Motion Sequence Data Dump 79h |

| 0mmm mmmm (mm) | Dump Motion Number (mm = 00h~63h) |

| 0ddd dddd (dd) | Data [NOTE3][TABLE3]|

| : | : |

| 1111 0111 (F7) | EOX |

+----------------+------------------------------------------------+

When this message is received at the MIDI dump page, the DATA PROCESS

(LOAD) COMPLETED(Function:23h) message or the DATA PROCESS(LOAD) ERROR

(Function:24h) message will be transmitted.

The DATA PROCESS(LOAD) ERROR(Function:24h) message will be transmitted

in other cases.

(8) 10 MOTION SEQUENCE DATA DUMP R/T

+----------------+------------------------------------------------+

| Byte [Hex] | Description |

+----------------+------------------------------------------------+

| F0,42,3n,77 | Exclusive Header KTV1 |

| 0111 1011 (7B) | 10 Motion Sequence Data Dump 7Bh |

| 0000 pppp (0p) | Dump Motion Page Number (0p = 00h~09h) |

| 0ddd dddd (dd) | Data [NOTE4][TABLE3]|

| : | : |

| 1111 0111 (F7) | EOX |

+----------------+------------------------------------------------+

When this message is received at the MIDI dump page, the DATA PROCESS

(LOAD) COMPLETED(Function:23h) message or the DATA PROCESS(LOAD) ERROR

(Function:24h) message will be transmitted.

The DATA PROCESS(LOAD) ERROR(Function:24h) message will be transmitted

in other cases.

(9) DATA PROCESS(LOAD) COMPLETED T

+----------------+------------------------------------------------+

| Byte [Hex] | Description |

+----------------+------------------------------------------------+

| F0,42,3n,77 | Exclusive Header KTV1 |

| 0010 0011 (23) | DATA PROCESS(LOAD) COMPLETED 23h |

| 1111 0111 (F7) | EOX |

+----------------+------------------------------------------------+

Transmits this message when DATA LOAD, PROCESSING have been completed.

(10) DATA PROCESS(LOAD) ERROR T

+----------------+------------------------------------------------+

| Byte [Hex] | Description |

+----------------+------------------------------------------------+

| F0,42,3n,77 | Exclusive Header KTV1 |

| 0010 0100 (24) | DATA PROCESS(LOAD) COMPLETED 24h |

| 1111 0111 (F7) | EOX |

+----------------+------------------------------------------------+

Transmits this message when DATA LOAD, PROCESSING have not been completed.

Dump Data Format

n = 0, 1, ...

DATA ( 1set = 8bit x 7byte )

b7 ~ b0 b7 ~ b0 b7 ~~ b0 b7 ~ b0

+-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ +-+-+-~~-+-+-+ +-+-+-+-+-+-+-+-+

| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

+-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ +-+-+-~~-+-+-+ +-+-+-+-+-+-+-+-+

7n+0 7n+1 7n+2 ~~ 7n+5 7n+6

MIDI DATA ( 1set = 7bit x 8Byte )

b7b7b7b7b7b7b7 b6 ~ b0 b6 ~~ b0 b6 ~ b0

+-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ +-+-+-~~-+-+-+ +-+-+-+-+-+-+-+-+

|0| | | | | | | | |0| | | | | | | | |0| | | | | |0| | | | | | | |

+-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ +-+-+-~~-+-+-+ +-+-+-+-+-+-+-+-+

7n+6,5,4,3,2,1,0 7n+0 7n+1 ~~ 7n+5 7n+6

NOTE 1 : GROBAL DATA DUMP FORMAT

[Global Data (22byte)] (see TABLE 1)

22byte = 7 * 3 + 1 --> 8 * 3 + (1 + 1) = 26byte

NOTE 2 : ALL STYLE DATA DUMP FORMAT

[Style.00(32byte)], ... ,[Style.99(32byte)] (see TABLE 2)

3200byte = 7 * 457 + 1 --> 8 * 457 + (1 + 1) = 3658byte

NOTE 3 : 1 MOTION SEQUENCE DATA DUMP FORMAT

[Motion Data (16~200048byte)] (see TABLE 3)

16byte = 7 * 2 + 2 --> 8 * 2 + (2 + 1) = 19byte

200048byte = 7 * 28578 + 2 --> 8 * 28578 + (2 + 1) = 228627byte

NOTE 4 : 10 MOTION SEQUENCE DATA DUMP FORMAT

[Motion Data p0(16~200048byte)],

... ,[Motion Data p9(16~200048byte] (see TABLE 3)

160byte = 7 * 22 + 6 --> 8 * 22 + (6 + 1) = 183byte

2000480byte = 7 * 6 --> 8 * (6 + 1) = 2286263byte

TABLE 1 :

+0 Monitor 1 Bright (valid:0~140)

+1 Monitor 1 Contrast (valid:0~181)

+2 Monitor 1 Color (valid:0~255)

+3 Monitor 2 Bright (valid:0~140)

+4 Monitor 2 Contrast (valid:0~181)

+5 Monitor 2 Color (valid:0~255)

+6 DV Direction IN/OUT (0=In, 1=out)

+7 Main Out Capture DIS/ENA (0=Disable, 1=Enable)

+8 Power on Style Number (0~99)

+9 Power on Group A Bank Number (0~99)

+10 Power on Group B Bank Number (0~99)

+11 MIDI Channel (0~15)

+12 bit7 MIDI Ribbon Touch [C] ENA/DIS (0=Enable, 1=Disable)

bit6-0 MIDI Ribbon Touch [C] CTRL#

+13 bit7 MIDI Hold [D] ENA/DIS (0=Enable, 1=Disable)

bit6-0 MIDI Hold [D] CTRL#

+14 bit7 MIDI [E] ENA/DIS (0=Enable, 1=Disable)

bit6-0 MIDI [E] CTRL#

+15 bit7 MIDI Slider [F] ENA/DIS (0=Enable, 1=Disable)

bit6-0 MIDI Slider [F] CTRL#

+16 bit7 MIDI Ribbon [G] ENA/DIS (0=Enable, 1=Disable)

bit6-0 MIDI Ribbon [G] CTRL#

+17 bit7 MIDI Knob [H] ENA/DIS (0=Enable, 1=Disable)

bit6-0 MIDI Knob [H] CTRL#

+18 bit7 MIDI Group A ENA/DIS (0=Enable, 1=Disable)

bit6-0 MIDI Group A CTRL#

+19 bit7 MIDI Group B ENA/DIS (0=Enable, 1=Disable)

bit6-0 MIDI Group B CTRL#

Summary of Contents for Kaptivator KTV1




























































Search results

Summary of Contents for Kaptivator KTV1

Reviews:

Related manuals for Kaptivator KTV1

Brands by name

Popular brands

Korg Kaptivator KTV1, Owner'S Manual

Search results

Summary of Contents for Kaptivator KTV1

Reviews:

Related manuals for Kaptivator KTV1

Brands by name

Popular brands