Korg M50-73 Parameter Manual Download

Page: 142 / 419

Sequencer mode

134

▼

0–1–3(4): Menu Command

• 0:

• 1:

• 2:

• 3:

• 4:

• 5:

Load Template Song

☞

p.191

• 6:

Save Template Song (Save as User Template
Song)

• 7:

• 8:

Set Location (Set Location for Locate Key)

• 9:

• 10:

Copy From Combi (Copy from

Combination)

☞

p.194

• 11:

Copy from Program

☞

p.195

For more information, please see “Sequencer: Menu
Command” on page 191.

0–1–5: Play Loop T01–08,
0–1–6: Play Loop T09–16

When playing or recording a song, you can independently
loop the MIDI tracks.

0–1–5(6)a: Location, Meter, Tempo,

Tempo Mode, Song Select,
Track Select, Reso, RPPR

For more information, please see “0–1–1: Program T01–08,
0–1–2: Program T09–16” on page 129.

0–1–5(6)b: Play Loop

Selected Track Info

This displays information about the currently selected MIDI
track. For more information, please see “0–1–1(2)b: Track
Program Select” on page 131.

Track 01 (Track Number):

Category

[Category Name]

Indicates the category.

Track Play Loop

[Off, On]

Specifies looping for a MIDI track.

On (checked):

That track will loop between

Loop Start

Measure

and

Loop End Measure

Loop Start Measure

[001...999]

Specifies the first measure of the loop.

Loop End Measure

[001...999]

Specifies the last measure of the loop.

Play Intro

[Off, On]

On (checked):

After the measures before the specified

Loop

Start Measure

are played once, the region of

Loop Start

Measure

–

Loop End Measure

will be played repeatedly.

For example, you can use this on a drum track to make it
play a fill-in and then begin looping.

Off (unchecked):

Playback will begin from the

Loop Start

Measure

, and will begin looping immediately.

This will be valid if

Track Play Loop

is checked and

Loop Start Measure

is set to other than 001.

0–1

–5b

0–1

–5a

0–1

–5

Summary of Contents for M50-73




































































































































































































































































































































































































































Search results

Summary of Contents for M50-73

Reviews:

Related manuals for M50-73

Brands by name

Popular brands

Korg M50-73, Parameter Manual

Search results

Summary of Contents for M50-73

Reviews:

Related manuals for M50-73

Brands by name

Popular brands