manualshive.com logo in svg

Korg M50-73, Parameter Manual

The Korg M50-73 is a versatile and powerful synthesizer with 73 keys. Unlock the full potential of this incredible instrument by downloading the free Parameter Manual from our website. This comprehensive manual provides essential guidance on programming and exploring the M50-73's vast array of features and functions.

Share
Download
background image

Appendices

400

and the drum track function in Combination or 
Sequencer mode will be transmitted from timbres or 
MIDI tracks whose 

Status

 is BTH, EXT, or EX2.)

Sequencer: 

The M50 will not be able to control the per-

formance data; it will be controlled by the external MIDI 
device connected to MIDI IN or the computer connected 
to USB. If you wish to playback the external sequencer to 
make the M50’s sequencer playback in synchronization 
to the external timing clock, you must first set the same 
time signature and starting measure locations on both 
devices.

Even if 

MIDI Clock

 is set to External MIDI or External 

USB and the M50 is being controlled from an external 
device, musical data will be transmitted by tracks whose 

Status

 is BTH, EXT, or EX2.

Recording musical data from an external 
device

There are two ways in which you can play back an external 
sequencer and record its playback on the M50.

• Set 

MIDI Clock

 (Global 1–1a) to Internal, begin 

recording, and then start the external sequencer. With 
this method, the MIDI messages will be recorded 
without the two devices being synchronized. Since the 
incoming musical data will simply be recorded, this 
method allows the performance to be reproduced 
faithfully, but since measure divisions etc. will not be 
kept track of, this method is not suitable if you intend to 
edit the data later.

• If you set 

MIDI Clock

 to External MIDI or External USB, 

the start of recording and the tempo etc. will all be under 
the control of the external sequencer.
Since the two devices will be synchronized during the 
recording process, measure divisions etc. will be 
accurately preserved. (You will need to set the time 
signature before recording.) For more information, 
please see “Multi REC” on page 139.

Recording the MIDI output of the M50’s 
controllers, Arpeggiator, Drum Track 
function and internal sequencer to an 
external sequencer/computer

If you wish to record the MIDI output of the M50’s 
controllers, Arpeggiator, Drum Track function, and internal 
sequencer on an external sequencer or computer and use the 
M50 as the monitoring and playback tone generator while 
you record, you must turn off the M50’s Local Control 
setting (“Local Control On” Global 1–1a), and set your 
external sequencer/computer for echo-back (a function by 
which the data received at MIDI IN is retransmitted without 
change from MIDI OUT) so that the data from the M50’s 
controllers, Arpeggiator, Drum Track function and internal 
sequencer will not be applied in duplicate to the tone 
generator.

Using an external MIDI sequencer/computer to 
record performance data from the Drum Track 
function

Turn off the M50’s local control setting. In Program mode, 
the Drum Track function will transmit performance data if 
the Drum Track 

Prog MIDI Out

 setting (Global 1–1a) is on 

(checked). By default, this is off (unchecked), so you’ll need 
to turn it on.

In your external sequencer/computer, turn the echo-back 
setting on. With these settings, the sound generator won’t 
produce duplicate notes, and recording and playback will 
occur correctly.

Using the Realtime Control Knob 1–4 to 
record MIDI control changes on an 
external MIDI sequencer/computer

Set the M50 to Local Control Off. Set the external MIDI 
sequencer/computer to Echo Back On. With these settings, 
recording and playback will occur correctly, and the control 
changes will not be applied to the tone generator in 
duplicate.

Recording the Arpeggiator or RPPR 
function on an external MIDI sequencer/
computer

When the arpeggiator is on, playing the keyboard or 
operating the controllers of the M50 will operate and control 
the arpeggiator.

In the same way, the arpeggiator will be controlled by MIDI 
messages received from MIDI IN.

Notes transmitted from MIDI OUT (USB) by the arpeggiator 
are controlled as follows, according to the local control 
setting (

Local Control On

 Global 1–1a).

In Sequencer mode, when the RPPR function is on, playing 
the keyboard will cause RPPR to operate. Similarly, the 
RPPR function will also operate in response to notes 
received on the MIDI channel of the track selected by 

Track 

Select

 (Seq 0–1–1(2)a). Notes will be transmitted by RPPR 

from MIDI OUT according to the local control setting (

Local 

Control On

) as described below.

Local Control On

: Notes from the arpeggiator or RPPR will 

be transmitted from MIDI OUT (USB).

Local Control Off

: Notes from the arpeggiator or RPPR will 

not be transmitted from MIDI OUT (USB). The M50 will 
sound only in response to MIDI messages received at MIDI 
IN, or generated by the arpeggiator or RPPR.

Setting example 1

Record the note messages generated by the arpeggiator or 
RPPR function on the external MIDI sequencer/computer.

1. Turn on this instrument’s arpeggiator or RPPR func-

tion. Set this instrument to Local Control On.

2. Turn Local Control On for this instrument.

3. Turn Echo Back Off on your external sequencer/compu-

ter.

By turning echo back off, you will prevent the arpeggiator or 
RPPR function from performing duplicate processing on the 
monitored notes during recording.

4. During playback, turn off the arpeggiator and RPPR 

functions of this instrument.

Setting example 2

Use the external MIDI sequencer/computer to record only 
the notes that trigger the arpeggiator or RPPR function, 
and operate this instrument’s arpeggiator or RPPR 
function for monitoring while recording, and during 
playback.

1. Turn on the M50’s arpeggiator or RPPR function.

2. Set the M50 to Local Control Off. 

The note messages generated by the arpeggiator or RPPR 
function will not be output. 

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Related manuals for M50-73

iHome iConnect IH-K236LS Get Started preview
iConnect IH-K236LS
Brand: iHome Pages: 2
cabstone Media-PC Keyboard + Remote Control Manual preview
Media-PC Keyboard + Remote Control
Brand: cabstone Pages: 16
Epomaker TH21 Quick Start Manual preview
TH21
Brand: Epomaker Pages: 24
Tascam FireOne Owner'S Manual preview
FireOne
Brand: Tascam Pages: 24
MAXTEK 68393 User Manual preview
68393
Brand: MAXTEK Pages: 12
ACCO Brands M01369-K User Manual preview
M01369-K
Brand: ACCO Brands Pages: 7
M-Audio HAMMER88 User Manual preview
HAMMER88
Brand: M-Audio Pages: 14
BrandMotion AVMS-3604 Installation Instructions Manual preview
AVMS-3604
Brand: BrandMotion Pages: 9
BH FITNESS Prisma M10 Manual preview
Prisma M10
Brand: BH FITNESS Pages: 39
Philips LDH0462/00 Information Sheet preview
LDH0462/00
Brand: Philips Pages: 3
Philips CID2680 Brochure preview
CID2680
Brand: Philips Pages: 3
Philips CVR300 User Manual preview
CVR300
Brand: Philips Pages: 17
Philips GoSure ADR620 User Manual preview
GoSure ADR620
Brand: Philips Pages: 62
TYPHOON Gsmosphere TI001 User Manual preview
Gsmosphere TI001
Brand: TYPHOON Pages: 10
Zoom ZDTV Quick Start Manual preview
ZDTV
Brand: Zoom Pages: 6
Targus AKB862 User Manual preview
AKB862
Brand: Targus Pages: 15
Franklin Bookman Professor PLUS User Manual preview
Bookman Professor PLUS
Brand: Franklin Pages: 26
Franklin BOOKMAN III MWD-1450 User Manual preview
BOOKMAN III MWD-1450
Brand: Franklin Pages: 33

Brands by name

Popular brands

Load more brands