manualshive.com logo in svg

Korg M50-73, Parameter Manual

The Korg M50-73 is a versatile and powerful synthesizer with 73 keys. Unlock the full potential of this incredible instrument by downloading the free Parameter Manual from our website. This comprehensive manual provides essential guidance on programming and exploring the M50-73's vast array of features and functions.

Share
Download
background image

SEQ P3: Track Param (Track Parameters) 3–5: Pitch T01–08, 3–6: Pitch T09–16

153

Portamento

[PRG, Off, 001...127]

Make portamento settings for each MIDI track. 

The portamento setting you make here will be used when 
the song is played or recorded from the beginning. If you 
change the setting while recording, it will be recorded as 
part of the musical data. (However if you set this to PRG, it 
will not be recorded.) You can change this setting during 
playback. However if you play back any Portamento On/
Off data or Portamento Time data that was previously 
recorded, the settings will change accordingly.

When the track whose 

Status

 (Seq 3–1(2)c) is INT or BTH, 

MIDI control change CC#05 (Portamento Time) and CC#65 
(Portamento Switch) can be received to control this and 
change the setting. (If the setting is PRG, CC#05 Portamento 
Time will not be received.)

When you switch songs or return to the beginning of the 
song, tracks whose 

Status

 is BTH, EXT, or EX2 will transmit 

this setting via MIDI. If this is Off, CC#65 with a value of 0 
will be transmitted. If this is 001–127, a CC#65 of 127 and 
CC#05 of 1–127 will be transmitted.

If this is set to PRG, nothing will be transmitted.

This data is transmitted and received on the MIDI channel 
specified for each track by 

MIDI Channel

 (Seq 3–1(2)c). (See 

Global P1: MIDI, SEQ Mode “Track MIDI Out” on page 222)

Track 02...08, 09...16 (Track Number):

Here, you can make OSC settings for MIDI tracks 2–8 and 9–
16. They are the same as for track 1. For more information, 
please see “Track 01 (Track Number):,” above.

▼

3–3(4): Menu Command

• 0: 

Memory Status

☞

p.191

• 1: 

Exclusive Solo

☞

p.73

• 2: 

Rename Song

☞

p.191

• 3: 

Delete Song

☞

p.191

• 4: 

Copy From Song

☞

p.191

• 5: 

Load Template Song

☞

p.191

• 6: 

Save Template Song (Save as User Template 
Song)

☞

p.192

• 7: 

FF/REW Speed

☞

p.192

• 8: 

Set Location (Set Location for Locate Key)

☞

p.192

• 9: 

GM Initialize

☞

p.193

• 10: 

Copy From Combi (Copy from 

Combination)

☞

p.194

• 11: 

Copy from Program

☞

p.195

For more information, please see “Sequencer: Menu 
Command” on page 191.

3–5: Pitch T01–08, 
3–6: Pitch T09–16

Here, you can make pitch-related settings for each MIDI 
track.

3–5(6)a: Location, Meter, Tempo, Tempo 

Mode, Song Select, Track Select, 
Reso, RPPR

3–5(6)b: Track Info

For more information, please see “0–1–1(2)a: Location, 
Meter, Tempo, Tempo Mode, Song Select, Track Select, Reso, 
RPPR” on page 129.

For more information, please see “2–1: Trim T01–08, 2–2: 
Trim T09–16” on page 149.

3–5(6)c: Pitch

Track 01 (Track Number):

Transpose

[–60...+00...+60]

Adjusts the pitch of each MIDI track in semitone steps.

12 units equal one octave.

Detune (Use BPM Adjust in Menu)

[–1200...+0000... +1200]

Adjusts the pitch of each MIDI track in one-cent units.

+0000:

 Normal pitch.

Note: 

You can also use the 

Detune BPM Adjust

 menu 

command (see page 122) to automatically make a detune 
setting from a calculation in BPM units.

 Transpose 

and 

Detune

 do not affect the notes 

transmitted via MIDI Out. 

Transpose 

and 

Detune

 can 

be controlled via MIDI RPN messages received on the 
Track’s MIDI channel. The way that this works depends 
on whether or not the Track uses a Drum Program. 

If the Track does not use a Drum Program–for example, 
if it uses a Single or Double Program–then MIDI RPN 
Coarse Tune will control 

Transpose

, and RPN Fine 

Tune will control 

Detune

.

If the Track uses an Drum Program, MIDI RPN Coarse 
Tune and Fine Tune will be combined to control 

Detune

. The overall range is ±1 octave for coarse tune 

and fine tune together.

3–5c

3–5a

3–5b

3–5
Menu

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Related manuals for M50-73

Casio CTK-650 Service Manual preview
CTK-650
Brand: Casio Pages: 22
Nanoxia NCORE RETRO Manual preview
NCORE RETRO
Brand: Nanoxia Pages: 8
Targus ECOSMART ERGONOMIC AKB871 User Manual preview
ECOSMART ERGONOMIC AKB871
Brand: Targus Pages: 7
Cateye MSC-CY200 Quick Start Manual preview
MSC-CY200
Brand: Cateye Pages: 42
Optimus 42-4032 Owner'S Manual preview
42-4032
Brand: Optimus Pages: 32
Siemens KBPC M Operating Manual preview
KBPC M
Brand: Siemens Pages: 12
Siemens SINUMERIK ONE KB 1500 Equipment Manual preview
SINUMERIK ONE KB 1500
Brand: Siemens Pages: 38
perixx PERIBOARD-512 User Manual preview
PERIBOARD-512
Brand: perixx Pages: 20
Instant-Dict ED200 User Manual preview
ED200
Brand: Instant-Dict Pages: 229
Franklin DBE-1470 User Manual preview
DBE-1470
Brand: Franklin Pages: 76
Korg strokerhythm efgsj2 Owner'S Manual preview
strokerhythm efgsj2
Brand: Korg Pages: 4
Korg RK-100 Service Manual preview
RK-100
Brand: Korg Pages: 16
Korg POLYSIX Owner'S Manual preview
POLYSIX
Brand: Korg Pages: 32
Korg PA80 Abridged Service Manual preview
PA80
Brand: Korg Pages: 20
Trust 1144877 Advanced Manual preview
1144877
Brand: Trust Pages: 77
Yamaha Electone Stagea ELS-01 Owner'S Manual preview
Electone Stagea ELS-01
Brand: Yamaha Pages: 252
Yamaha EX5 Owner'S Manual preview
EX5
Brand: Yamaha Pages: 304
Roland cakewalk A-300PRO Owner'S Manual preview
cakewalk A-300PRO
Brand: Roland Pages: 92

Brands by name

Popular brands

Load more brands