manualshive.com logo in svg

Korg M50-73, Parameter Manual

The Korg M50-73 is a versatile and powerful synthesizer with 73 keys. Unlock the full potential of this incredible instrument by downloading the free Parameter Manual from our website. This comprehensive manual provides essential guidance on programming and exploring the M50-73's vast array of features and functions.

Share
Download
background image

PROG P4: Amp/EQ 4–1: Amp1/Driver1

41

PROG P4: Amp/EQ

Oscillators 1 and 2 have separate controls for volume (also 
called “amplitude,” or “amp” for short); pan; and Drive; as 
well as dedicated amp envelopes and keyboard tracking 
generators. Additionally, both Oscillators share a three-band 
EQ.

These pages let you control all of these related parameters. 
Among other things, you can:

• Set up the Driver circuit, which adds saturation and bass 

boost to the timbre.

• Set the pan position and pan modulation.

• Control amp level and modulation, including keyboard 

tracking, the amp envelope, LFO modulation, and AMS 
control.

• Set up the three-band Track EQ.

Note that when the 

Oscillator Mode

 is set to 

Single

, only 

Oscillator 1’s amp, pan, and drive parameters are active; the 
pages for Oscillator 2 will be grayed out.

4–1: Amp1/Driver1

This page controls the basic settings for the Amp/EQ 
section. Here, you can:

• Set up the Driver circuit.

• Set the initial volume level.

• Control the pan position and pan modulation.

4–1a: Driver

The Driver adds saturation and overdrive to the sound, for 
everything from subtle fattening to drastic distortion. Unlike 
an overdrive effect, the Driver processes each voice 
individually, so the timbre stays the same regardless of how 
many voices are being played.

The two main parameters, 

Drive

 and 

Low Boost

, work 

together to create the overall Driver effect. 

Drive

 contributes 

edge and bite, and 

Low Boost

 provides the body as well as 

boosting the bass.

Bypass

[Off, On]

When 

Bypass

 is On, the Driver is completely removed from 

the signal path.

Drive

[00...99]

This controls the amount of edge and bite in the timbre. Low 
settings will produce mild saturation, and higher settings 
create more obvious distortion.

Often, it’s useful to increase the 

Low Boost

 along with the 

Drive

.

Note: 

Even when the 

Drive

 amount is set to 0, the Driver 

circuit still affects the timbre. If your goal is a completely 
pristine sound, use the Bypass control instead.

AMS (Drive)

[List of AMS Sources]

This selects an AMS modulation source to control the 

Drive

 

amount. 

For a list of AMS sources, please see “AMS (Alternate 
Modulation Source) List” on page 374.

Intensity

[–99...+99]

This controls the depth and direction of the AMS 
modulation for Drive.

Low Boost

[00...99]

This low-frequency EQ controls the body character of the 
sound. The specific EQ frequencies affected will change with 
the 

Drive

 setting.

Higher amounts increase the bass boost, and will also 
intensify the effect of the 

Drive

 parameter.

AMS

[List of AMS Sources]

This selects an AMS modulation source to control the 

Low 

Boost

 amount. 

For a list of AMS sources, please see “AMS (Alternate 
Modulation Source) List” on page 374.

Intensity

[–99...+99]

This controls the depth and direction of the AMS 
modulation for 

Low Boost

.

4–1b: Amp Level

Amp Level

[000...127]

This controls the basic volume level of Oscillator 1, before 
keyboard tracking, velocity, and other modulation.

The OSC/DrumTrk Mixer and volume

You can control the Oscillator volume directly from the 
sliders in the 0–4 OSC/DrumTrk Mixer page. This is a 
separate parameter, in addition to 

Amp Level

.

MIDI and volume

You can control the Program’s overall volume via MIDI 
using both Volume (CC#7) and Expression (CC#11). 
When used one at a time, the two controllers work in 
exactly the same way: a MIDI value of 127 is equal to 
the 

Amp Level

 setting, and lower values reduce the 

volume.

If both CC#7 and CC#11 are used simultaneously, the 
one with the lower value determines the maximum 
volume, and the one with the higher value scales down 
from that maximum.

This is controlled on the global MIDI channel (Global 1–1a).

4–1a

4–1b

4–1c

4–1
Menu

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Related manuals for M50-73

Connect IT CKB-2000-CS User Manual preview
CKB-2000-CS
Brand: Connect IT Pages: 16
Atmel 42580A User Manual preview
42580A
Brand: Atmel Pages: 18
Garmin vivosmart HR/HR+ Owner'S Manual preview
vivosmart HR/HR+
Brand: Garmin Pages: 16
Nav TV MOST-HUR MB User Manual preview
MOST-HUR MB
Brand: Nav TV Pages: 6
J.Burrows KB110 Instruction Manual preview
KB110
Brand: J.Burrows Pages: 6
Fatar ST-490 Plus User Manual preview
ST-490 Plus
Brand: Fatar Pages: 4
Lexking Jupiter Series User Manual preview
Jupiter Series
Brand: Lexking Pages: 6
Deltaco TB-258 User Manual preview
TB-258
Brand: Deltaco Pages: 5
CME UF5 User Manual preview
UF5
Brand: CME Pages: 24
CME U-Key User Manual preview
U-Key
Brand: CME Pages: 64
Franklin Bookman BDK-1460 User Manual preview
Bookman BDK-1460
Brand: Franklin Pages: 24
Targus AKB35 User Manual preview
AKB35
Brand: Targus Pages: 10
iBox AURORA K-2R User Manual preview
AURORA K-2R
Brand: iBox Pages: 11
Hamichord MC-3 User Manual preview
MC-3
Brand: Hamichord Pages: 17
Trust DIRECT ACCESS II Quick Start Manual preview
DIRECT ACCESS II
Brand: Trust Pages: 4
Trust ENTEA UNIVERSAL Quick Installation Manual preview
ENTEA UNIVERSAL
Brand: Trust Pages: 9
perixx PERIBOARD-333 User Manual preview
PERIBOARD-333
Brand: perixx Pages: 21
GeoVision GV-Keyboard V3 User Manual preview
GV-Keyboard V3
Brand: GeoVision Pages: 58

Brands by name

Popular brands

Load more brands