11
Behavior ................................................................................. [Momentary, Toggle]
Choose the behavior of a button, trigger pad or a pedal switch from the following two types.
Momentary
When the Assign Type is “Note C-1 to G9,” a note-on message will be transmitted when you press a but-
ton, trigger pad or a pedal switch, and a note-off message will be transmitted when you release it.
When it is “CC#0 to 127,” the On Value will be transmitted when you press a button, trigger pad or a pedal
switch, and the Off Value will be transmitted when you release it.
Toggle
When the Assign Type is “Note C-1 to G9,” a note-on message and a note-off message will be transmitted
alternately each time you press a button, trigger pad or a pedal switch.
When it is “CC#0 to 127,” the On Value and the Off Value will be transmitted alternately each time you
press a button, trigger pad or a pedal switch.
Off Value, On Value ......................................................................................[0...127]
Transmit a value of the message that will be transmitted when a button or a pedal switch is on or off.
TIP
When the Assign Type is “Note,” note-on messages will be transmitted with the “On Value” as
the velocity.
Lower Value, Upper Value, Left Value, Right Value ...................................[0...127]
This parameter specifies a value for the control change message that will be transmitted when you
move a slider or a knob to its bottom/top or far left/right.
Arp Enable ..................................................................................... [Disable, Enable]
This parameter will Enable/Disable the arpeggiator function for the keyboard, the touchpad, or the
trigger pad.
When you disable the arpeggiator function, it will not be triggered by the specified controller even if
you turn on the arpeggiator.
TIP
In case the trigger pad is set to Chord Scale mode, the Arp Enable will always be activated in
the Enable setting.