5
How to use the settings screen
The settings screen allows you to set up detailed scene parameters and global parameters.
Setting the controllers
Set the MIDI messages to be output by the controllers, such as the knobs and sliders on this unit.
1.
Press the SETTING button on the Performance screen to display the setting screen for scene
parameters. The setting screen for scene parameters will appear after “Move Controller” is dis-
played on the screen for a while.
2.
Use the controller that you want to set.
The parameter setting screen will be displayed for the controller you have used.
TIP
You can display the parameter setting screen by using the controller while “Move Controller” is
being displayed.
3.
Use the Page / button to select the parameter.
4.
Set the value with the value slider.
TIP
If a controller is used on the controller setting screen that is not the present setting target, the
parameter setting screen will be displayed for the controller that was used.
Setting other scene parameters
Set the parameters concerning the entire scene and the parameters concerning the keyboard.
1.
Press the SETTING button on the Performance screen to display the settings screen for scene
parameters.
2.
Use the Page / button to select the parameter.
TIP
If you move to the settings screen, “Move Controller” is displayed for a set time. You can still
use the Page / button to select the parameter.
3.
Set the value with the value slider.
TIP
If you operate the controller while the scene parameters are being displayed, it will jump to the
setting screen for the controller being operated. If you wish to carry out setting for other scene
parameters, press the EXIT button to return to the Performance screen and then press the
SETTING button to display the scene parameter setting screen.
Setting global parameters
Sets the overall movements of this unit, such as the velocity curve and display brightness, etc.
1.
If the SETTING button is pressed during display of the settings screen for scene parameters,
the global parameter setting screen is displayed.
TIP
Each time the SETTING button is pressed, the screen switches between the scene parameter
and global parameter setting screen.
2.
Use the Page / button to select the parameter.
3.
Set the value with the value slider.
