background image

5

1. Introduction

LCD and control panel

1

Name display

This shows the program name, effect
name, or parameter name, as appropri-
ate for each operation.

2

Edit icon

This will light if the selected program has been edited. It will blink if the program is
currently being edited.

3

Phrase trainer icon

This will blink when you are in 

Phrase Trainer mode

.

4

Metronome icon

This will light when the metronome is on. It will blink while the metronome tempo or
level is being adjusted.

5

MASTER/VALUE display

This shows the master level and parameter values. When the parameter value matches
the value that is written in the program, the 

ORIG 

(original icon) will light.

6

NR-PRG LEVEL switch

Use this switch to adjust the amount of noise reduction or the level of each program.

7

RENAME switch

Use this switch to change the name of a program.

8

Metronome LED

This LED will blink in time with the metronome tempo.

9

WRITE switch

Use this switch to save an edited program.

0

EXIT switch

From any function, you can press this to return to 

Play mode

.

A

Cursor switches (   ,   )

Use these switches to select the parameter that you wish to edit, or when modifying the
name of a program.

B

MASTER/VALUE switches (

)

Use these switches to change the master level or the value of a parameter.

C

Pedal LED

This indicates the on/off status and type of the pedal effect, and the recording status
when the Sample & Play function is used.

D

Bank number display

This shows the bank number of the selected program. When a user program is selected, a
decimal point “

.

” located at the lower right of the bank number will light.

Summary of Contents for Toneworks AX1500G

























Reviews: