manualshive.com logo in svg

Korg TRITON Extreme, Manual

The Korg TRITON Extreme, an exceptional synthesizer workstation, offers unparalleled musical versatility and creativity. Unlock its full potential with our comprehensive and user-friendly manual. Simply visit our website to download the latest update instructions, free of charge, ensuring you get the most out of your TRITON Extreme experience.

Share
Download
background image

109

Sampling

 P0

 P1

 P2

 P3

 P4

 P5

 P8

 P9

3

Specify the sample number of the copy destination. 

 When copying a stereo sample, specify both the L 

and R channels for the copy destination sample number.

4

If you check “with Sample Data”: Executing the copy 
will simultaneously copy the sample data (waveform 
data) as well. The copy source and copy destination sam-
ples will exist as completely independent samples. For 
example, you would use this when you wish to start with 
the same sample data, and edit it separately in P1: Sam-
ple Edit to create two or more different types of sample.
If you do not check “with Sample Data”: Executing the 
copy will not copy the sample data (waveform data). The 
newly created sample will share the sample data of the 
copy source sample. For example, you would use this 
when you wish to use P2: Loop Edit to create two or 
more versions of the same sample data with different 
loop addresses. Sample memory area will not be con-
sumed by this type of copy. If you use P1: Sample Edit to 
edit the sample data, the results will affect all samples 
that share this sample data.

5

To execute the Copy Sample command, press the OK 
button

. To cancel, press the Cancel button.

0–1C: Rename Sample

This command lets you modify the name of the currently 
selected sample.

1

Use “Sample Select” (0–1b) to select the sample whose 
name you want to edit.

2

Select “Rename Sample” to access the dialog box.

3

Press the text edit button to open the text edit dialog box, 
and input the desired sample name (up to sixteen charac-
ters).

 If the multisample is stereo and a stereo sample is 

selected, you can input up to fourteen characters for the 
sample name. This is because the last two characters are 
reserved for -L and -R. If you rename up to fourteen char-
acters of the sample of either the L or the R channel, the 
other sample will automatically be renamed.

4

To execute the Rename Sample command, press the OK 
button

. To cancel, press the Cancel button.

0–1D: Delete MS (Delete Multisample)

This command deletes the currently selected multisample or 
all multisamples.

1

Use “MS (Multisample Select)” (0–1a) to select the multi-
sample that you want to delete.

2

Select “Delete MS” to access the dialog box.

3

All Multisamples:

 Check this if you wish to delete all 

multisamples.

4

Delete Samples too?:

 Check this if you also wish to 

delete the samples included in the deleted multisam-
ple(s). However, samples that are mapped to (used by) 
other multisamples or drum kits will not be deleted.

5

To execute the Delete Multisample command, press the 
OK button

. To cancel, press the Cancel button.

Even if you also choose to delete the samples that are 
included in the deleted multisample(s), any sample 
data (waveform data) used by these samples that is 
shared with other samples will not be deleted. Only the 
sample itself will be deleted.

0–1E: Copy MS (Copy Multisample)

This command copies the selected multisample to another 
multisample.

The copy destination multisample number will auto-
matically be included in the resulting multisample 
name. If necessary, use “Rename MS” (0–1F) to rename 
it. When doing so, make sure that the name is not iden-
tical to any other multisample name. (The multisample 
name is used to distinguish stereo multisamples. 

☞

p.106)

1

Use “MS (Multisample Select)” (0–1a) to select the copy-
source multisample.

2

Select “Copy MS” to access the dialog box.

3

Specify the copy destination multisample number.

 When copying a stereo multisample, copy both 

the L and R channels of the copy destination multisample 
number.

4

To execute the Copy Multisample command, press the 
OK button

. To cancel, press the Cancel button.

When a multisample is copied, the samples assigned to 
the multisample will also be copied at the same time. At 
this time, they will be automatically copied to vacant 
sample numbers. The sample data (waveform data) will 
be shared between the copy source and copy destination. 
(Additional sample memory area will not be consumed.)

0–1F: Rename MS (Rename Multisample)

This command modifies the name of the currently selected 
multisample.

1

Use “MS (Multisample Select)” (0–1a) to select the multi-
sample whose name you want to edit.

2

Select “Rename MS” to access the dialog box.

3

Press the text edit button to move to the text edit dialog 
box, and input a multisample name of up to sixteen char-
acters.

 If the selected multisample is stereo, up to four-

teen characters can be input as the multisample name. 
This is because the last two characters are reserved for -L 

0000: NewSample_0000

0001: NewSample_0001

"Copy Sample"
with Sample Data

Sample Data

Sample Memory

Sample Data

0000: NewSample_0000

0001: NewSample_0001

"Copy Sample"

Sample Data

Sample Memory

Summary of Contents for TRITON Extreme



































































































































































































































































































































































Reviews:

No comments

Related manuals for TRITON Extreme

Unitech K270 Product Manual preview
K270
Brand: Unitech Pages: 2
Axxess AX-LR904 Installation Instructions Manual preview
AX-LR904
Brand: Axxess Pages: 8
Freemotion FMPW11.0 User Manual preview
FMPW11.0
Brand: Freemotion Pages: 30
Memorex MX2700 Series User Manual preview
MX2700 Series
Brand: Memorex Pages: 5
Bodykey InBodyWATCH Faq preview
InBodyWATCH
Brand: Bodykey Pages: 10
SAI square Magic Tok Manual preview
Magic Tok
Brand: SAI square Pages: 17
Korg MS-10 Owner'S Manual preview
MS-10
Brand: Korg Pages: 38
Ceratech Accuratus KYB500-K104MUSBBLKHY Specification Sheet preview
Accuratus KYB500-K104MUSBBLKHY
Brand: Ceratech Pages: 1
Trevi SF 200 User Manual preview
SF 200
Brand: Trevi Pages: 32
EchoMaster Pro SA-US4 User Manual preview
SA-US4
Brand: EchoMaster Pro Pages: 16
Targus PA760U User Manual preview
PA760U
Brand: Targus Pages: 21
Roland EM-50 OR Owner'S Manual preview
EM-50 OR
Brand: Roland Pages: 82
Franklin TDP-590 User Manual preview
TDP-590
Brand: Franklin Pages: 44
Accuratus 5100 Datasheet preview
5100
Brand: Accuratus Pages: 1
Madison 15-5007 User Manual preview
15-5007
Brand: Madison Pages: 34
Aukey KM-G14 User Manual preview
KM-G14
Brand: Aukey Pages: 6
Aukey KM-G18 User Manual preview
KM-G18
Brand: Aukey Pages: 8
Tacx t1670 User Manual preview
t1670
Brand: Tacx Pages: 112

Brands by name

Popular brands

Load more brands