manualshive.com logo in svg

Korg TRITON Extreme, Manual

The Korg TRITON Extreme, an exceptional synthesizer workstation, offers unparalleled musical versatility and creativity. Unlock its full potential with our comprehensive and user-friendly manual. Simply visit our website to download the latest update instructions, free of charge, ensuring you get the most out of your TRITON Extreme experience.

Share
Download
background image

177

0-7

0-1

0-2

0-3

0-4

0-5

0-6

Media

▼

 0–1: Page Menu Command

0–1A: Hide unknown files

Checked:

 Undefined files will not be displayed in the direc-

tory window. However, this is valid only if the current direc-
tory is a DOS directory.

0–1B: Translation

Checked

: The multisample names and sample names used 

in Sampling mode will be displayed instead of the DOS file-
names, a .KMP (Korg Multisample Parameter) and .KSF 
(Korg Sample File).

0–1C: Load selected

This command loads the file or directory that was selected in 
the “directory window” (0–1b) into the internal memory.
When you choose “Load selected,” a dialog box will appear. 
The dialog box will differ depending on the type of file to be 
loaded.

If a file to be loaded cannot be found, or when loading a file 
that was saved across media

If a necessary file cannot be found in the current directory or 
in a lower directory when loading multisamples, sample 
data, .PCG, or .SNG files, a dialog box like the following 
(Where is a ...) will appear.

This will appear in the following cases.

• If when loading a .KSC file, a .KMP file used by it cannot 

be found.

• If when loading a .KMP file, a .KSF file cannot be found
• If when loading an S1000/S3000 format Program file, a 

Sample file cannot be found.

• If loading a .KSF file that was larger than the media 

capacity and was therefore saved on multiple media, 
when the first media has been loaded and the second 
media needs to be specified.

• When loading a .PCG file that was split across two or 

more volumes of media, when the first volume has been 
loaded and the second media is now required.

• When loading a .PCG file and also simultaneously 

loading a .SNG file, if the identically-named .SNG file 
are not found in the current directory after loading the 
.PCG file. 

If this dialog box appears, take the following action.

You cannot perform this operation on a CompactFlash 
card inserted in the TRITON Extreme’s CF card slot. 
The TRITON Extreme’s CF card slot does not support 
hot-plugging; removing the CompactFlash card when 
the power is on may damage the media or the TRITON 
Extreme itself.

1

Select the directory that contains the file indicated by 
“Where is a...” If the specified file is located on another 
media, exchange media. Then press the directory win-
dow in the LCD screen to make the TRITON Extreme rec-
ognize the media, and select the appropriate directory.

It is not possible to open .PCG or .SNG files in the 
“Where is a ...” dialog box. The Open button cannot be 
used for .PCG or .SNG files.

2

Press the Select button to resume loading. Loading will 
be aborted if you press the Cancel button. If you want to 
abort the loading process, press the OK button. If you 
press the Skip button, the indicated file will be skipped, 
and the next file will be loaded.
Except for special situations such as when the media con-
taining the indicated file has been damaged or cannot be 
found, you should use the Select button to continue the 
loading process.

1) Load .PCG: 

selected icon

Data in the .PCG file will be loaded.

1

Use the “Load ****** .SNG too” and “Load ****** .KSC 
too” check boxes to select the .SNG file and .KSC file.

• If you check “Load ******.SNG too,” the file with an 

identical name to the .PCG file and an extension of .SNG 
will also be loaded.

• If you check “Load ********.KSC too,” the file with an 

identical name to the .PCG file and an extension of .KSC 
will also be loaded.
If this file does not exist in the current directory, load it as 
described in the above procedure “If a file to be loaded 
cannot be found,… .”

2

In “.PCG Contents,” specify the data to be loaded.
All

: Load all data from the .PCG file.

Bank A–E

, H(E-A)–N–H: Load data of the specified 

bank. In this case, use “To” Bank A–E, H–N to specify 
the load destination bank. When you execute the load, 
the combinations, programs, drum kits, and user arpeg-
gio pattern data of only the specified bank will be loaded 
to the load destination bank. Global settings will not be 
loaded.
The bank of the programs used by combinations, the 
numbers of user arpeggio pattern used by combinations/
programs, and the number of the drum kits used by the 
Programs will be corrected automatically so that they are 
appropriate.
Similarly if a .SNG file is loaded simultaneously, the bank 
of the programs used by tracks of the Song (or if there are 
track/pattern events, the bank of the program within the 
event) will be corrected automatically so that they are 
appropriate.

0–1A

0–1B

0–1C

0–1D

Summary of Contents for TRITON Extreme



































































































































































































































































































































































Reviews:

No comments

Related manuals for TRITON Extreme

iDataLink Maestro Installation Manual preview
Maestro
Brand: iDataLink Pages: 9
ZEPP GolfSense 3.0 User Manual preview
GolfSense 3.0
Brand: ZEPP Pages: 50
Connects2 PARK-401 User Manual preview
PARK-401
Brand: Connects2 Pages: 2
AbleNet Chester Creek BigBlu KinderBoard Quick Start Manual preview
Chester Creek BigBlu KinderBoard
Brand: AbleNet Pages: 11
Garmin vivosmart HR/HR+ Owner'S Manual preview
vivosmart HR/HR+
Brand: Garmin Pages: 16
SC iStick TC60W User Manual preview
iStick TC60W
Brand: SC Pages: 49
Active Key AK-C4400 User Manual preview
AK-C4400
Brand: Active Key Pages: 2
Maddog GK850 Series Operating Manual preview
GK850 Series
Brand: Maddog Pages: 26
Fatar ST-490 Plus User Manual preview
ST-490 Plus
Brand: Fatar Pages: 4
KeySonic Super Mini KSK-3201 RF Operation Manual preview
Super Mini KSK-3201 RF
Brand: KeySonic Pages: 16
Franklin Bookman Merriam-Webster ADV-640 User Manual preview
Bookman Merriam-Webster ADV-640
Brand: Franklin Pages: 20
Franklin BOOKMAN MWD-2001 User Manual preview
BOOKMAN MWD-2001
Brand: Franklin Pages: 19
Franklin CST-180 User Manual preview
CST-180
Brand: Franklin Pages: 36
Wireless Computing RF-600 Operating Instructions preview
RF-600
Brand: Wireless Computing Pages: 2
Targus PA760U User Manual preview
PA760U
Brand: Targus Pages: 21
Advanced Racing Computers vLink User Manual preview
vLink
Brand: Advanced Racing Computers Pages: 2
Eleaf OPPO RTA User Manual preview
OPPO RTA
Brand: Eleaf Pages: 2
Totally Wicked Odyssey Pipe User Manual preview
Odyssey Pipe
Brand: Totally Wicked Pages: 11

Brands by name

Popular brands

Load more brands