manualshive.com logo in svg

Korg TRITON Extreme, Manual

The Korg TRITON Extreme, an exceptional synthesizer workstation, offers unparalleled musical versatility and creativity. Unlock its full potential with our comprehensive and user-friendly manual. Simply visit our website to download the latest update instructions, free of charge, ensuring you get the most out of your TRITON Extreme experience.

Share
Download
background image

183

0-7

0-1

0-2

0-3

0-4

0-5

0-6

Media

22) Load .KSC:

 selected icon

The .KMP files and .KSF files listed in the .KSC file will be 
loaded as multisamples and samples respectively.

The .KMP files and .KSF files listed in the .KSC file 
are saved in a directory of the same name that is cre-
ated automatically at the same time as the .KSC file.

1

“Select .KSC Allocation” allows you to specify how the 
multisamples and samples in the .KSC file will be loaded.
Append

: The data will be loaded into the numbers after 

the last multisample or sample number currently existing 
in sample memory (RAM) (i.e., that were previously 
sampled or loaded). In this case, only the valid multisam-
ples and samples will be packed and loaded. (

☞

p.178 

“.KSC Allocation” diagram)
If “Load ********.PCG too” is checked when you load the 

data, programs within the .PCG file that use multisam-
ples from the .KSC file will automatically have the multi-
sample settings for their oscillators rewritten so that each 
program uses the correct multisample. Drum kits in the 
.PCG file that use samples from the .KSC file will auto-
matically have the sample settings for the drum kit 
rewritten so that the drum kit uses the correct samples.
Clear

: All multisamples and samples currently existing 

in sample memory (RAM) will be cleared, and the multi-
samples and samples will be loaded in the same configu-
ration as when they were saved (

☞

p.178 “.KSC 

Allocation” diagram).
Choose “Append” if sample memory (RAM) already 
contains multisamples and samples that you do not want 
to erase, and you would like to load additional multisam-
ples and samples from media.
Choose “Clear” if you want to reproduce the state in 
which the data had been saved, for example immediately 
after power-on.

2

If the current directory contains a .PCG file or .SNG file of 
the same filename, you will be able to select the “Load 
********.PCG too” and/or “Load ********.SNG too” check-

boxes.

☞

“Load .PCG: 

1

”

• If you check “Load ********.PCG too,” the .PCG file of 

the same name as the .KSC file will also be loaded.

☞

“Load .PCG: 

2

”

• If you check “Load ********.SNG too,” the .SNG file of 

the same name as the .KSC file will also be loaded.

☞

“Load .PCG: 

3

”

3

To load the data, press the OK button. To cancel without 
loading, press the Cancel button.
If the .KSF files used by the .KMP file are not in the cur-
rent directory or below it, a dialog box will appear, allow-
ing you to specify the directory. Use the procedure “If a 
file to be loaded cannot be found,…” (

☞

p.177) to load the 

required .KSF files.

Since overflow checking of sample memory (RAM) is 
performed when loading each individual .KSF file, it is 
possible that an overflow may occur in the middle of 
the loading process.

23) Load .KMP: 

selected icon

The selected .KMP file will be loaded as a multisample. The 
.KSF files used by the .KMP will also be loaded as samples.

The .KSF files used by the .KMP file will be saved in 
an identically-named directory that is created auto-
matically when the .KMP file is created.

1

To load the data, press the OK button. To cancel without 
loading, press the Cancel button.
Samples will be loaded starting at the first unoccupied 
number following the last multisample or sample that 
currently exists in the sample memory. Only valid multi-
samples or samples will be packed and loaded (Append 
load).
If the .KSF files used by the .KMP file are not in the cur-
rent directory or below it, a dialog box will appear, allow-
ing you to specify the directory. Use the procedure “If a 
file to be loaded cannot be found,…” (

☞

p.177) to load the 

required .KSF files.

Since sample memory (RAM) overflow checking is per-
formed when loading each .KSF file, an overflow may 
occur during the loading process.

24) Load .KSF: 

selected icon

The selected .KSF file will be loaded as a sample.

1

To load the data, press the OK button. To cancel without 
loading, press the Cancel button.
The sample will be loaded after the last multisample or 
sample that currently exists in the sample memory 
(RAM) (Append load).

Loading AIFF files and WAVE files

The TRITON Extreme can load AIFF format or WAVE for-
mat files, which are formats used to save audio data on per-
sonal computers etc. The loaded data can be used as a 
sample. When this data that has been loaded, it can be used 
as a sample or a drumsample.

25) Load .AIF: 

selected icon

The selected AIFF file will be loaded as a sample.

1

To load the data, press the OK button. To cancel without 
loading, press the Cancel button.
The sample will be loaded after the last sample that cur-
rently exists in the sample memory (RAM) (Append 
load).

You can load multiple files within the directory. 
(

☞

p.182)

Summary of Contents for TRITON Extreme



































































































































































































































































































































































Reviews:

No comments

Related manuals for TRITON Extreme

A4Tech GX-100 User Manual preview
GX-100
Brand: A4Tech Pages: 4
Scosche freeKEY BTKB Quick Start Manual preview
freeKEY BTKB
Brand: Scosche Pages: 16
nord Stage 3 User Manual preview
Stage 3
Brand: nord Pages: 64
Riitek RT-MWK13 Installation & User Manual preview
RT-MWK13
Brand: Riitek Pages: 11
InnoCigs JustFog P16A Clearomizer User Manual preview
JustFog P16A Clearomizer
Brand: InnoCigs Pages: 2
thomann Startone MK-400 User Manual preview
Startone MK-400
Brand: thomann Pages: 60
ID Tech VERSAKEY Manual preview
VERSAKEY
Brand: ID Tech Pages: 16
Korg MS2000 Service Manual preview
MS2000
Brand: Korg Pages: 28
soundsation Jukey-61 Manual preview
Jukey-61
Brand: soundsation Pages: 76
Yamaha PortaSound PSS-30 (Spanish) Manual Del Propietario preview
PortaSound PSS-30
Brand: Yamaha Pages: 11
Yamaha PortaSound PSS-450 User Manual preview
PortaSound PSS-450
Brand: Yamaha Pages: 16
Yamaha PortaSound PSS-570 Owner'S Manual preview
PortaSound PSS-570
Brand: Yamaha Pages: 23
Yamaha PortaSound PSS-560 Owner'S Manual preview
PortaSound PSS-560
Brand: Yamaha Pages: 23
Yamaha PortaSound PSS-270 Owner'S Manual preview
PortaSound PSS-270
Brand: Yamaha Pages: 16
Yamaha PortaSound PSS-470 Owner'S Manual preview
PortaSound PSS-470
Brand: Yamaha Pages: 24
Yamaha PortaSound PSS-580 (Spanish) Manual De Instrucciones preview
PortaSound PSS-580
Brand: Yamaha Pages: 29
Yamaha PortaSound PSS-360 Owner'S Manual preview
PortaSound PSS-360
Brand: Yamaha Pages: 24
Yamaha PortaSound PSS-290 Owner'S Manual preview
PortaSound PSS-290
Brand: Yamaha Pages: 39

Brands by name

Popular brands

Load more brands