manualshive.com logo in svg

Korg TRITON Extreme, Manual

The Korg TRITON Extreme, an exceptional synthesizer workstation, offers unparalleled musical versatility and creativity. Unlock its full potential with our comprehensive and user-friendly manual. Simply visit our website to download the latest update instructions, free of charge, ensuring you get the most out of your TRITON Extreme experience.

Share
Download
background image

280

The following functions can be assigned to the REALTIME 
CONTROLS [1]–[4] knobs in B-mode.

Set the “Realtime Control Knobs B-Assign” parameters in 
each mode to make these assignments.
• Program P1: Controller page (1–4b).
• Combination P4: Controller page (4–4b).
• Sequencer P4: Controller page (4–7b).

• Song Play P2: Controller page (2–1b).
• Sampling P4: Controller page (4–1b).

These settings can be made in Program mode for each 
program, in Combination mode for each combination, 
and in Sequencer mode for each song. In Song Play 
mode and Sampling mode, these settings are made for 
the entire mode.

Realtime Control Knobs B–Assign List

Knob 1...4 B-Assign

Off

No function

Knob Mod. 1 (CC#17)

General purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this, 
select KnobMod1:#17 for “AMS,” or KnobM1:#17 for “Dmod Src.” Simultaneously, CC#17 will be transmitted.

Knob Mod. 2 (CC#19)

General purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this, 
select KnobMod2:#19 for “AMS,” or KnobM2:#19 for “Dmod Src.” Simultaneously, CC#19 will be transmitted.

Knob Mod. 3 (CC#20)

General purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this, 
select KnobMod3:#20 for “AMS,” or KnobM3:#20 for “Dmod Src.” Simultaneously, CC#20 will be transmitted.

Knob Mod. 4 (CC#21)

General purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this, 
select KnobMod4:#21 for “AMS,” or KnobM4:#21 for “Dmod Src.” Simultaneously, CC#21 will be transmitted.

Master Volume

Control the volume. Simultaneously, the universal system exclusive message Master Volume [F0H, 7FH, nn, 04, 
01, vv, mm, F7H] will be transmitted to adjust the volume of all tracks or timbres (while preserving the volume bal-
ance between tracks or timbres).

Portamento Time (CC#05)

Control the portamento time. Simultaneously, CC#5 will be transmitted.

Volume (CC#07)

Control the volume. Simultaneously, CC#7 will be transmitted.

Post IFX Pan (CC#08)

Control the panning after the insertion effect. Simultaneously, CC#8 will be transmitted. If Valve Force is On and 
“Placement” is set to Insert, this controls the panning of the output from Valve Force.

Pan (CC#10)

Control the oscillator panning. Simultaneously, CC#10 will be transmitted.

Expression (CC#11)

Control the expression. Simultaneously, CC#11 will be transmitted.

FX Control 1 (CC#12)

Control Effect Dynamic Modulation. When controlling this, set “Dmod Src” to FXCtrl1:#12. Simultaneously, CC#12 
will be transmitted.

FX Control 2 (CC#13)

Control Effect Dynamic Modulation. When controlling this, set “Dmod Src” to FXCtrl2:#13. Simultaneously, CC#13 
will be transmitted.

LFP Cutoff (CC#74)

Control the cutoff frequency of the filter (low pass filter). Simultaneously, CC#74 will be transmitted.

Resonance/HPF (CC#71)

Control the resonance of the filter, or the cutoff frequency of the high pass filter. If the program’s “Filter Type” is 
Low Pass Resonance, the resonance level will be controlled. If it is Low Pass & High Pass, the cutoff frequency 
of the high pass filter will be controlled. Simultaneously, CC#71 will be transmitted.

Filter EG Int. (CC#79)

Control the EG intensity of the filter. Simultaneously, CC#79 will be transmitted.

F/A Attack (CC#73)

Control the EG attack of the filter and amplifier. Simultaneously, CC#73 will be transmitted.

F/A Decay (CC#75)

Control the EG decay time and slope time of the filter and amplifier. Simultaneously, CC#75 will be transmitted.

F/A Sustain (CC#70)

Control the EG sustain level of the filter and amplifier. Simultaneously, CC#70 will be transmitted.

F/A Release (CC#72)

Control the EG release time of the filter and amplifier. Simultaneously, CC#72 will be transmitted.

Pitch LFO1 Spd (CC#76)

Control the frequency of LFO1. Simultaneously, CC#76 will be transmitted.

Pitch LFO1 Dep (CC#77)

Control the LFO1 intensity of the pitch. Simultaneously, CC#77 will be transmitted. 

Pitch LFO1 Dly (CC#78)

Control the delay of LFO1. Simultaneously, CC#78 will be transmitted.

SW 1 Mod. (CC#80)

General-purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To control 
these, set “AMS” or “Dmod Src” to SW1:CC#80. Simultaneously, CC#80 will be transmitted.

SW 2 Mod. (CC#81)

General-purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To control 
these, set “AMS” or “Dmod Src” to SW2:CC#81. Simultaneously, CC#81 will be transmitted.

Foot Switch (CC#82)

General-purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To control 
these, set “AMS” or “Dmod Src” to FootSW:#82. Simultaneously, CC#82 will be transmitted.

MIDI CC#83 (CC#83)

General-purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To control 
these, set “AMS” or “Dmod Src” to MIDI:CC#83. Simultaneously, CC#83 will be transmitted.

MFX Send 1 (CC#93)

Control the send level to Master Effect1. Simultaneously, CC#93 will be transmitted.

MFX Send 2 (CC#91)

Control the send level to Master Effect2. Simultaneously, CC#91 will be transmitted.

MIDI CC#00...CC#95

The specified MIDI control change (CC#) will be transmitted. If the TRITON Extreme is set so as to be controlled 
by the control change message, the corresponding control will occur.

Summary of Contents for TRITON Extreme



































































































































































































































































































































































Reviews:

No comments

Related manuals for TRITON Extreme

Yamaha PSR-195 PSR-79 Mode D'Emploi preview
PSR-195 PSR-79
Brand: Yamaha Pages: 48
Tascam FireOne Owner'S Manual preview
FireOne
Brand: Tascam Pages: 24
True SHOWRUNNER Owner'S Manual preview
SHOWRUNNER
Brand: True Pages: 33
ZEPP GolfSense 3.0 User Manual preview
GolfSense 3.0
Brand: ZEPP Pages: 50
Vibra SJP-CE Series Operation Manual preview
SJP-CE Series
Brand: Vibra Pages: 35
Seiko WP7500 Operation Manual preview
WP7500
Brand: Seiko Pages: 36
Ceratech ACCURATUS M2080 Specifications preview
ACCURATUS M2080
Brand: Ceratech Pages: 1
A4Tech GD-300 User Manual preview
GD-300
Brand: A4Tech Pages: 4
Dr.Dabber aura User Manual preview
aura
Brand: Dr.Dabber Pages: 13
Wismec Vicino D30 User Manual preview
Vicino D30
Brand: Wismec Pages: 2
Bontempi Toy Band Star 12 3765 Owner'S Manual preview
Toy Band Star 12 3765
Brand: Bontempi Pages: 18
Totally Wicked Rocket User Manual preview
Rocket
Brand: Totally Wicked Pages: 32
Roland AX-1 Owner'S Manual preview
AX-1
Brand: Roland Pages: 56
Dakota Digital LED Tail Lights LAT-NR350 Installation Instructions preview
LED Tail Lights LAT-NR350
Brand: Dakota Digital Pages: 3
Blink Marine PowerTrack CANopen Manual preview
PowerTrack CANopen
Brand: Blink Marine Pages: 31
Natec NAUTILUS User Manual preview
NAUTILUS
Brand: Natec Pages: 10
Natec DISCUS 2 User Manual preview
DISCUS 2
Brand: Natec Pages: 18
asmodus Colossal 80W Quick Start Manual preview
Colossal 80W
Brand: asmodus Pages: 80

Brands by name

Popular brands

Load more brands