manualshive.com logo in svg

Korg TRITON Extreme, Manual

The Korg TRITON Extreme, an exceptional synthesizer workstation, offers unparalleled musical versatility and creativity. Unlock its full potential with our comprehensive and user-friendly manual. Simply visit our website to download the latest update instructions, free of charge, ensuring you get the most out of your TRITON Extreme experience.

Share
Download
background image

Appendices

303

Destination sample data used in source sample

Can’t overwrite

Destination sample is empty

Destination song is empty

Directory is not empty

Cleanup directory

Are you sure?

Disc full

E

Error in formatting medium

Error in reading from medium

Error in writing to medium

Exceeded 8 Programs

F

File already exists

File contains unsupported data

File is read-only protected

File unavailable

File/path not found

Meaning: Since the sample data at the destination (save 

location) is also used by the source sample, it can-
not be overwritten.

Action:

Without using Overwrite, specify a different sam-
ple for the destination (save location).

Meaning: The sample for editing is empty.

Meaning: The song that was specified as the copy destina-

tion or bounce destination does not exist.

Action:

Execute the Create New Song command in the 
dialog box that appears when a new song is 
selected before copying or bouncing.

Meaning: When deleting a directory, files or directories exist 

within that directory.

Action:

Press the OK button to delete all files and/or 
directories within that directory.

Meaning: When executing the Media mode utility com-

mand “Write to CD,” there is insufficient space 
remaining on the CD-R/RW for the data to be 
written.

Action:

Either write to other media, or remove unneeded 
tracks.

Meaning: An error occurred while performing a physical 

format (full format) or high-level format (quick 
format) of the media.

Action:

Use other media.

Meaning: When executing the Media mode utility com-

mand “Convert to ISO9660 Format,” an error 
occurred while rewriting the UDF area.

Action:

Use other media.

Meaning: An error occurred while reading data from media. 

This error may also appear when data is being 
written to media by a Save or Copy operation.

Action:

Execute the reading operation once again. If the 
same error occurs, it is possible that the data on 
the disk has been damaged.

Meaning: An error occurred while writing data to a 

medium. (Verify error)

Action:

It is possible that the media has been physically 
damaged. Try another media. Avoid using the 
media that produced the error.
In the case of MS-DOS format media, execute the 
Media mode Utility page menu command “Check 
Medium.”

Meaning: During execution of Advanced Conversion Load, 

the maximum number of eight programs was 
exceeded. Depending on the structure of the 
AKAI Program, it may be convert-loaded as mul-
tiple programs and one combination. In this case, 
the number of TRITON Extreme programs result-
ing from the conversion is limited to the maxi-
mum number of programs that can used in a 
combination (i.e., eight programs).

Action:

After loading one AKAI Program, edit it on the 
TRITON Extreme.

Action:

Instead of using Advanced Conversion Load, load 
the data as multisamples or samples, and then 
edit it on the TRITON Extreme.

Meaning: When executing a Create Directory or File 

Rename operation, a directory or file of the same 
name already exists on the media.

Meaning: When executing the Media mode Utility “Copy” 

command without using wild cards, the copy des-
tination contained a file of the same name as the 
copy source.

Meaning: When you executed the Media mode Utility “Save 

Sampling Data” for All, All Multisamples, All 
Samples, or One Multisample, a directory already 
existed on the media with the same name as the 
directory that you attempted to create on the TRI-
TON Extreme.

Meaning: When sampling or saving to the media, a file of 

the same name already exists.

Action:

Either delete the existing directory or file, or spec-
ify a different filename.

Meaning: You attempted to load an AIFF, WAVE, or KSF file 

that was in a format not supported by the TRI-
TON Extreme.

Action:

In the case of a AIFF or WAVE file, use a computer 
(if possible) to convert the file into a format that is 
supported on the TRITON Extreme, and then load 
it.

Meaning: You attempted to write to a file or to delete a file 

that had a read-only attribute.

Action:

Use your computer to turn off the Read-Only 
attribute.

Meaning: You attempted to save a file to media that con-

tained a read-only file of the same name.

Action:

Save the file with a different name.

Meaning: You attempted to load or open a file whose format 

was incorrect.

Meaning: When loading a sample file in Media mode, the 

specified file does not exist. Alternatively, the 
specified filename does not exist in the location 
you selected in a dialog box for choosing another 
directory level or other media.

Summary of Contents for TRITON Extreme



































































































































































































































































































































































Reviews:

No comments

Related manuals for TRITON Extreme

PAC C2R-CHY4 Installation Instructions preview
C2R-CHY4
Brand: PAC Pages: 5
Turtle Beach Impact 500 Quick Start Manual preview
Impact 500
Brand: Turtle Beach Pages: 12
M-Audio Keystation 61 User Manual preview
Keystation 61
Brand: M-Audio Pages: 44
iPazzPort KP-810-18R User Manual preview
KP-810-18R
Brand: iPazzPort Pages: 5
Landel MailBug User Manual preview
MailBug
Brand: Landel Pages: 44
soundsation Jukey-61 Manual preview
Jukey-61
Brand: soundsation Pages: 76
Brother AX-425 Parts Reference List preview
AX-425
Brand: Brother Pages: 26
JVC EXAD KD-AVX55 Instructions Manual preview
EXAD KD-AVX55
Brand: JVC Pages: 218
Yamaha PortaSound PSS-30 (Spanish) Manual Del Propietario preview
PortaSound PSS-30
Brand: Yamaha Pages: 11
Yamaha PortaSound PSS-450 User Manual preview
PortaSound PSS-450
Brand: Yamaha Pages: 16
Yamaha PortaSound PSS-570 Owner'S Manual preview
PortaSound PSS-570
Brand: Yamaha Pages: 23
Yamaha PortaSound PSS-560 Owner'S Manual preview
PortaSound PSS-560
Brand: Yamaha Pages: 23
Yamaha PortaSound PSS-270 Owner'S Manual preview
PortaSound PSS-270
Brand: Yamaha Pages: 16
Yamaha PortaSound PSS-470 Owner'S Manual preview
PortaSound PSS-470
Brand: Yamaha Pages: 24
Yamaha PortaSound PSS-580 (Spanish) Manual De Instrucciones preview
PortaSound PSS-580
Brand: Yamaha Pages: 29
Yamaha PortaSound PSS-360 Owner'S Manual preview
PortaSound PSS-360
Brand: Yamaha Pages: 24
Yamaha PortaSound PSS-290 Owner'S Manual preview
PortaSound PSS-290
Brand: Yamaha Pages: 39
Yamaha PortaSound PSS-580 Operating Manual preview
PortaSound PSS-580
Brand: Yamaha Pages: 50

Brands by name

Popular brands

Load more brands