manualshive.com logo in svg

Korg TRITON Extreme, Manual

The Korg TRITON Extreme, an exceptional synthesizer workstation, offers unparalleled musical versatility and creativity. Unlock its full potential with our comprehensive and user-friendly manual. Simply visit our website to download the latest update instructions, free of charge, ensuring you get the most out of your TRITON Extreme experience.

Share
Download
background image

22

Br (AMS SW Break)

[–, 0, +]

Specifies the direction in which “AMS (Level Mod. AMS)” 
will affect “Break (Break Point Level).” When “Intensity 
(AMS Intensity)

” has a positive (+) value, a setting of + for 

this parameter will allow “AMS (Level Mod. AMS)” to raise 
the EG level, and a setting of – will allow “AMS (Level Mod. 
AMS)” to lower the EG level. With a setting of 0 there will be 
no change.

3–4c: Time Modulation

These settings let you use alternate modulation to control 
the Time parameters of the filter 1 EG.

AMS1:

AMS1 (Time Mod. AMS1)

[Off, (KT, EXT)]

Selects the source that will control the Time parameters of 
the filter 1 EG (“AMS List” 

☞

p.272).

Intensity (AMS1 Intensity)

[–99…+99]

Specifies the depth and direction of the effect that “AMS1 
(Time Mod. AMS1)” will have.
For example if “AMS1 (Time Mod. AMS1)” is set to Flt KTr 
+/+

, the EG Time parameters will be controlled by the Keyboard 

Track (3–2a) settings. With positive (+) values of this parame-
ter, positive (+) values of Ramp (Ramp Setting) will lengthen 
the EG times, and negative (–) values of Ramp (Ramp Setting) 
will shorten the EG times. The direction of change is specified 
by “At (AMS1 SW Attack),” “Dc (AMS1 SW Decay),” “Sl 
(AMS1 SW Slope),” and “Rl (AMS1 SW Release).”
With a setting of 0, the times specified by Filter 1 EG (3–4a) 
will be used.
If “AMS1 (Time Mod. AMS1)” is set to Velocity, positive 
(+) values

 of this parameter will cause EG times to lengthen 

as you play more strongly, and negative (–) values will 
cause EG times to shorten as you play more strongly.

At (AMS1 SW Attack)

[–, 0, +]

Specifies the direction in which “AMS1 (Time Mod. AMS1)” 
will affect the attack time. With positive (+) values of 
“Intensity (AMS1 Intensity),” setting this parameter to + 
will allow AMS1 to lengthen the time, and setting this 
parameter to – will allow AMS1 to shorten the time. With a 
setting of 0 there will be no change.

Dc (AMS1 SW Decay)

[–, 0, +]

Specifies the direction in which “AMS1 (Time Mod. AMS1)” 
will affect the decay time. With positive (+) values of 
“Intensity (AMS1 Intensity),” setting this parameter to + 
will allow AMS1 to lengthen the time, and setting this 
parameter to – will allow AMS1 to shorten the time. With a 
setting of 0 there will be no change.

Sl (AMS1 SW Slope)

[–, 0, +]

Specifies the direction in which “AMS1 (Time Mod. AMS1)” 
will affect the slope time. With positive (+) values of “Inten-
sity (AMS1 Intensity)

,” setting this parameter to + will 

allow AMS1 to lengthen the time, and setting this parameter 
to – will allow AMS1 to shorten the time. With a setting of 0 
there will be no change.

Rl (AMS1 SW Release)

[–, 0, +]

Specifies the direction in which “AMS1 (Time Mod. AMS1)” 
will affect the release time. With positive (+) values of 
“Intensity (AMS1 Intensity),” setting this parameter to + 
will allow AMS1 to lengthen the time, and setting this 
parameter to – will allow AMS1 to shorten the time. With a 
setting of 0 there will be no change.

AMS2:

AMS2 (Time Mod. AMS2)

[Off, (KT, EXT)]

Intensity (AMS2 Intensity)

[–99…+99]

At (AMS2 SW Attack)

[–, 0, +]

Dc (AMS2 SW Decay)

[–, 0, +]

Sl (AMS2 SW Slope)

[–, 0, +]

Rl (AMS2 SW Release)

[–, 0, +]

These parameters are the settings for AMS2 to control the 
Time parameters of the filter 1 EG (

☞

AMS1).

▼

 3–4: Page Menu Command

3–4A: Sync Both EGs

When you select the page menu command “Sync Both 
EGs

,” a check mark will be added at the left of “Sync Both 

EGs.” In this state, you can edit the filter 1 EG and filter 2 EG 
simultaneously. (Editing either EG will change the settings 
of both EGs.)

“Sync Both EGs” cannot separately sync the filter EG 
and amp EG. For example if they are synced in 4–3A, 
they will also be synced here.

This can be selected only if “Oscillator Mode” (1–1a) is 
Double

.

3–5: Filter2
3–6: Filter2 Mod.
3–7: Filter2 LFO Mod.
3–8: Filter2 EG 

Make settings for filter 2 which controls the sound of oscilla-
tor 2. You can choose either a 24 dB/octave low pass filter 
with resonance or a 12 dB/octave low pass filter and 12 dB/
octave high pass filter connected in series. Filter 2 can be 
used if “Oscillator Mode” (1–1a) is Double. (

☞

“3–1: 

Filter1” – “3–4: Filter1 EG”)

Filter 1 EG changes (level) (AMS = Velocity, Intensity = a positive (+) value)

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

Softly played note with “St,” 
“At,” and “Br” set to + (setting 
of 3–4a: Filter 1 EG)

Strongly played note with 
“St,” “At,” and “Br” set to +

Strongly played note with 
“St,” “At,” and “Br” set to –

Filter 1 EG changes (Time) (AMS = Velocity, Intensity = a positive (+) value)

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

Softly played note with “At,” 
“Dc,” “Sl” and “Rl” set to + 
(setting of 3–4a: Filter 1 EG)

Strongly played note with 
“At,” “Dc,” “Sl” and “Rl” set 
to +

Strongly played note with 
“At,” “Dc,” “Sl” and “Rl” set 
to –

0–1A

1–1A

1–1B

3–4A

Summary of Contents for TRITON Extreme



































































































































































































































































































































































Reviews:

No comments

Related manuals for TRITON Extreme

StattQualm SQuape Quick Start Manual preview
SQuape
Brand: StattQualm Pages: 5
J Well J Well Mini JW5 User Manual preview
J Well Mini JW5
Brand: J Well Pages: 13
Razer Lycosa Gaming Keyboard User Manual preview
Lycosa Gaming Keyboard
Brand: Razer Pages: 24
Laser Gaming KBX-SRMKM-937 Manual preview
KBX-SRMKM-937
Brand: Laser Gaming Pages: 9
Cherry G83-14501LPAUS Specifications preview
G83-14501LPAUS
Brand: Cherry Pages: 2
Rosewill Helios RK-9200 Series User Manual preview
Helios RK-9200 Series
Brand: Rosewill Pages: 11
Car Show Dual DVD Headrest Replacement System Installation Manual preview
Dual DVD Headrest Replacement System
Brand: Car Show Pages: 9
Datalogic Universal Keyboard Wedge Connectivity Manual preview
Universal Keyboard Wedge
Brand: Datalogic Pages: 11
CSL 300940 User Manual preview
300940
Brand: CSL Pages: 8
I-Rocks IRK75MS Quick Installation Manual preview
IRK75MS
Brand: I-Rocks Pages: 17
Cherry G86-6x4xx Operating Manual preview
G86-6x4xx
Brand: Cherry Pages: 8
SMK-Link VersaPoint DuraKey VP6340 User Manual preview
VersaPoint DuraKey VP6340
Brand: SMK-Link Pages: 2
Yamaha PortaTone PSR-12 Owner'S Manual preview
PortaTone PSR-12
Brand: Yamaha Pages: 20
Jaeger 21500579J Manual preview
21500579J
Brand: Jaeger Pages: 11
Hagstrom Electronics KE72-T User Manual preview
KE72-T
Brand: Hagstrom Electronics Pages: 28
Yamaha S70 XS Owner'S Manual preview
S70 XS
Brand: Yamaha Pages: 52
JDC ELECTRONIC SA SpeedWatch Instruction Manual preview
SpeedWatch
Brand: JDC ELECTRONIC SA Pages: 8
Targus ThumbPad Palm m125 User Manual preview
ThumbPad Palm m125
Brand: Targus Pages: 21

Brands by name

Popular brands

Load more brands