61
Sequencer
P0
P1
P2
P3
P4
P5
P6
P7
P8
P9
0–1I: FF/REW Speed
This allows you to set the speed at which fast-forward or
rewind will occur when you press the [FF] key or [REW]
key.
1
Select “FF/REW Speed” to access the dialog box.
2
In “Speed,” specify the speed (relative to the playback
tempo) at which fast-forward and rewind will occur.
This setting is relative to the playback tempo.
With a setting of 2, this will occur at double the playback
tempo; with a setting of 3, triple the tempo; and with a
setting of 4, quadruple the tempo. However in sections
where the playback data is dense, the fast-forward or
rewind speed may slow down.
3
If “Ignore Tempo” is checked, the playback tempo and
note length will be ignored, and fast-forward and rewind
will be performed as fast as possible. The speed of fast-
forward and rewind will differ between sections where
the playback data is dense and sections where it is sparse.
If this item is unchecked, fast-forward and rewind will
be performed at the speed you specify for “Speed.”
4
To execute the settings, press the OK button. To cancel,
press the Cancel button.
0–1J: Set Location (Set Location for Locate Key)
When you press the [LOCATE] key, you will move to the
location specified here.
1
Select “Set Location” to access the dialog box.
2
In “Location,” specify the location to which you will
move when you press the [LOCATE] key. If you specify
001:01.000
, you will move to the beginning of the song
when you press the [LOCATE] key.
3
To execute the settings, press the OK button. To cancel,
press the Cancel button.
When this dialog box is not open, you can hold down
the [ENTER] key and press the [LOCATE] key to set the
current location as the “Set Location” value.
0–1K: GM Initialize
This command transmits a GM System On message to the
Sequencer mode, resetting all tracks to the GM settings
(
☞
table below).
0–1L: Copy From Program
This command copies settings from the program you specify
to the currently selected song.
This is the same function as the Combination mode “Copy
From Program” (0–1C). The difference between Sequencer
mode and Combination mode is that the “MIDI Channel” of
the copy-destination tracks will remain at the channel speci-
fied for the song tracks, regardless of the “with Arpeggiator”
setting (
5
, item 1).
GM Initialize Parameter
Parameter
Track1–9, 11–16
Track10
P0
Bank/Program (Program Select)
G001:Acoustic Piano
g(d)001:STANDARD Kit
Pan
C064
C064
Volume
100
100
P1
Status
–
–
The setting remains unchanged
Use Program’s Scale
–
–
The setting remains unchanged
P7
Arpeggiator Assign
–
–
The setting remains unchanged
Other Arpeggiator parameters
–
–
The setting remains unchanged
P8
IFX/Indiv.Out BUS Select
L/R
DKit
Send1(MFX1)
0
0
Send2(MFX2)
40
40
IFX1–5
–
–
The setting remains unchanged
Pan(CC#8)
–
–
The setting remains unchanged
BUS Select
–
–
The setting remains unchanged
Send1
–
–
The setting remains unchanged
Send2
–
–
The setting remains unchanged
Other Insert Effect parameters
–
–
The setting remains unchanged
P9
MFX1
–
–
016: Stereo Chorus
MFX2
–
–
053: Reverb SmoothHall
Return1
–
–
127
Return2
–
–
050
Other Master Effect, Master EQ and Valve Force
parameters
–
–
Default settings
Summary of Contents for TRITON Extreme
