Effects
69
Effects
Overview
Each Layer has its own
PRE FX
,
MOD FX
, and
DELAY
. Additionally, the Performance has a master
REVERB
and
parametric EQ. See “Structure” on page 3.
SHIFT
-press or double-press the effects buttons to turn them on and off.
Main page
Type (
EFFECT TYPE
)
[List of Effects]
For each effect, you can select a
Type
(or “algorithm”) and a
Preset
within that
Type
. For full lists of Effect Types, see
“Pre FX,” “Mod FX,” “Delay,” and “Master Reverb,” below.
“All” types (
Delay All
,
Chorus All
, etc.) let you select
Presets
from all related algorithms.
Preset
[List of Presets]
These are the presets available for the selected
Type
.
Wet/Dry (
WET/DRY
)
[Dry, 1:99…99:1, Wet]
This controls the balance between the original signal (
Dry
) and the effected signal (
Wet
).
Level controls
Additional level-related parameters may be available on-screen, depending on the effect
Type
.
Input Trim
[-Inf, -84.9…0.0 dB]
This controls the volume level into the effect. Use this to alter the response of effects such as the
Waveshaper
, or to
compensate for gain increases in effects such as the
Talking Modulator
.
Volume
[-Inf, -84.9…+12.0 dB]
This control the post-
Drive
output of the
Guitar Amp
. Use it to compensate for level changes caused by
Drive
.
Output Level
[-Inf, -84.9…0.0 dB]
This controls the output volume from the effect. Use it to compensate for level changes in effects such as the
Waveshaper
.
Gain Adjust
[-Inf, -84.9…+24.0 dB]
This is similar to Output Level, but provides up to 24dB of gain. It appears only for the
Modern Compressor
.
