Identify the live cable to electricity meter (usually grey, red or brown and located on the right as you look at the
meter).
Unclip the clamp and fit it around the live cable. Snap the clip shut to fasten securely in place (see the images to
the right).
Please Note: It is normal for the clamp to be loose fit or be able to slide along the cable.
Fix the mounting bracket (optional) to the wall or the baseboard used to mount your meter, next to the fuse box
or nearby.
Slot the Transmitter into its bracket and connect the Sensor cable to any one of the three Transmitter sockets,
located on the base of the unit.
You can connect 3 clamps for 3 phase applications. AC power adapter is needed.
CONGRATULATIONS
You have now set up and installed your SEM3000 successfully. For Trouble shooting and additional information
Summary of Contents for MyWatt SEM3010
Page 24: ......
Page 28: ...SEM370 Menu Button ...
Page 29: ...web cloud service rs 485 software App service ...