From the 2018 1
st
quarter delivery, we will add the following display also
:
1) [Day (24hr)] total display
2) Select one of 5 types total display [this day/day/this week/this month/month] and show only 1 type continuously.
–
Press [menu] key 3 seconds continuous.
4
th
section
shows [Today graph] and [This week graph] simultaneously.
5
th
section
shows channel number, time, date, week, month and year display. The right-hand side, it shows the
temperature (
°C.
°F
) and CO2 emission display.
6
th
section
shows touch keys. You will hear a short beep sound every time you press one of the keys, [MENU],
[CHANGE], [DOWN], [UP], [CHANNEL] and [SET]. We recommend you use the sound to help you program the
settings accurately.
LCD protection cover film: Please take off the scratched cover film when you use it. You can see more clear display.
CALIBRATION MODE: C1 ~ C11
Before calibration, please see the lcd display must be as below photo:
A. TIME/CLOCK: [C1]
1)Press and hold the [MENU] key until you hear a beep. [SET] icon will appear in bottom right hand corner instead
of [CHANNEL].
2)Press [SET] key 3 seconds and you could see below symbol on NOW ENERGY:
3)Press [SET] key to see [F] [YEAR] blinking. Press [UP][DOWN] key to adjust the correct [YEAR] and press [SET] to
confirm.
4)[MINUTE] is blinking. Press [UP][DOWN] key to adjust the correct [MINUTE] and press [SET] to confirm.
Summary of Contents for MyWatt SEM3010
Page 24: ......
Page 28: ...SEM370 Menu Button ...
Page 29: ...web cloud service rs 485 software App service ...
