C. BASE TARIFF INPUT FOR AVERAGE(FLAT) RATE: [C3]
1)Press [MENU] key for to change [CHANNEL] -> [SET]
2)Press the [SET] key 3 seconds to see [F] [C1] symbol. Press [MENU] key 3 times to change [C1] –> [C3].
3)Press [SET] key to see [F] blinking. Press [SET] key again to see Single (Flat) rate [Yen25.91] on COST screen.
4)Move cursor to proper position using [MENU] key.
5)Press [UP][DOWN] key to adjust the correct value.
6)Press [MENU] to move next position and adjust the correct value. Change all the correct value continuously.
7)Press [CHANGE] to store.
D. TARIFF RATE FOR BASIC RATE: [C4]
1)Press [MENU] key for to change [CHANNEL] -> [SET]
2)Press the [SET] key 3 seconds to see [F] [C1] symbol. Press [MENU] key twice to change [C1] –> [C4].
3)Press [SET] key to see [F] blinking. Press [SET] key again to see [Basic Tariff(Tier 1): Yen1,404.0 for 50A] and
[Basic Tariff(Tier 2): Yen1,296.0 for Midnight] on COST screen.
4)Move cursor to proper position using [MENU] key.
5)Press [UP][DOWN] key to adjust the correct value.
6)Press [MENU] to move next position and adjust the correct value. Change all the correct value continuously.
7)Press [CHANGE] to store.
E. TARIFF RATE FOR 4-STEP TIERED RATE: [C5] - JAPAN TOKYO-ELECTRIC
TIER No.
TIER1
TIER2
TIER3
BASIC
BILLING
(50A) from [C4]
Yen1,404
THRESHOLD
0 ~ 120kwh
120 ~ 300kwh 300kwh over
RATE
Yen19.43/kwh Yen25.91/kwh
Yen29.93/kwh
1)Press [MENU] key for to change [CHANNEL] -> [SET]
2)Press the [SET] key 3 seconds to see [F] [C1] symbol. Press [MENU] key 4 times to change [C1] –> [C5].
3)Press [SET] key to see [F] blinking. Press [SET] key again to see 1-STEP Tiered rate [Yen19.43] on COST screen.
4)Move cursor to proper position using [MENU] key.
5)Press [UP][DOWN] key to adjust the correct value.
6)Press [MENU] to move next position and adjust the correct value. Change all the correct value continuously.
7)Press [SET] to see 1-THRESHOLD Range [120KWh].
8)Press [MENU] to move next position. And adjust the correct value Change all the value continuously.
9)Press [MENU] key to see [F] [120kWh] blinking. Press [UP] key to change the [Tier 2] and you can see [300 KWh].
10)You can see [Yen25.91] If it is okay, press [UP] key to see [Yen29.93] If it is okay, press [SET] key to see [00000
KWh]
