ShenZhen Korno Import&Export Co.,Ltd
-10-
6 Operation Interface
6.1 Gas Detection Interface
Under normal-detection mode,according to the number and types of
sensors in the device,there are different interfaces: single gas detection
mode as shown in figure6(O2 for example),two kinds of gas detection
mode as shown in figure 7 (O2
、
Combustible gas for example) ,three kinds
of gas detection mode as shown in figure 8(O2
、
Combustible gas
、
H2S for
example),four kinds of gas detection mode as shown in figure 9(O2
、
Combustible gas
、
H2S
、
CO for example)
The icons at the left top of the the display (refer to figures above) are
time and temperature, at the right top of the display shows the “pump
status”,”battery capacity”,”humidity”,take figure 9 for example,there are
four channels ,channel 1 at the left top(O2),channel 2 at the right
top(EX),channel 3 at the lower left(H2S),channel 4 at the lower right(CO);
figure indicate corresponding gas concentration in each channel, lower
left”O2” is the gas’s molecular formula,lower right “%VOL” is the
concentration unit; when one or several gas channel reach the alarm
value,there will be a alarm.
