ShenZhen Korno Import&Export Co.,Ltd
-11-
6.2 Function Menu Instruction
Long press”OK” button for 5
seconds to enter function menu as
shown in figure 10. Nine sub-menus are
including in function menu:Basic
setting
、
History Log
、
RealTime Curve
、
Zero Calibration
、
Target Calibration
、
Alarm setting
、
Measure Mode
、
Storage Setting
、
Time Setting
、
Factory
Setting.In main menu move the cursor to different sub-menu by press “Up”
and “Down”button,press “Ok” to enter corresponding sub-menu,press
“Back” to return to normal detection interface.
6.2.1 Basic Setting
In Basic setting menu user can see various setting as shown in figure
11,press “Up” and “Down” button to move the cursor , press “Ok”to enter
sub-menu and modify parameters.
In “Sensor Setting” menu user can check and modify gas detection
range
and unit(PPM
、
mg/m³
、
VOL% freely switch ) as shown in figure 12;
In “Channel Setting” menu user can set to activate/shield one or
