KORTING HK 9414 GMRB, User Manual

9

BEFORE ANY OPERATION, DISCONNECT THE 

APPLIANCE FROM THE ELECTRIC GRID.
Don’t use a steam cleaner for the cleaning the 

hob.

It is advisable to clean the appliance when it is 

cold.

Enamelled parts

The enamelled parts must be washed with a 

sponge and soapy water or with a light detergent.

Do not use abrasive or corrosive products.

Do not leave substances, such as lemon or tomato 

juice, salt water, vinegar, coffee and milk on the 

enamelled surfaces for a long time.

Stainless steel parts

Stainless steel can be stained if it remains in 

contact with highly calcareous water or aggressive  

detergents for an extended period of time.

The stainless steel parts should also be cleaned 

with soapy water and then dried with a soft cloth.

BURNERS AND RACKS

These parts can be removed to make cleaning 

easier.

The burners must be washed with a sponge and 

soapy water or with a light detergent, wiped well 

and placed in their housing perfectly. Make sure 

that the flame-dividing ducts are not clogged.

Check that the feeler of the safety valve and the 

start-up electrode are always perfectly cleaned, so 

as to ensure an optimum operation.

GAS TAPS

The possible lubrication of the taps must be 

carried out by specialized personnel, exclusively.

In case of hardening or malfunctions in the gas taps, 

apply to the Customer Service.

Failure to clean and maintain the plates can 

lead to the formation of rust on the surface.

CLEANING